Also updated my ubuntu box with v0.0.7 with no problems. Everythings working great. Did my first simple send of "Real" MSC from the wallet running in OS x to another address I have that I accessed with the wallet in Ubuntu. Very much prefer to send MSC this way! ..Bring on the exchange
|
|
|
I just sent Test MSC as shown on this tx: 2864f3b0fd08fdac83bd54073759b8e65e44c0ea65038a8f82c5c642c7de9916
When comparing masterchest.info to mastercoin-explorer, I noticed masterchest.info shows the transaction as valid and reflects the new balance. But this is happening before I see the 6 confirmations on bitcoinQT. Mastercoin-explorer does not appear to show the transaction as valid and an updated balance until after 6 confirmations. Tachikoma/Zathras, are you already aware of that difference?
Edit: Correction, mastercoin-explorer shows the tx as valid, but there's not change to the balance until after 6 confirmations - I would expect this is the correct behavior..
|
|
|
Nice improvements! resizeable windows and being able to see and select my address are welcome additions. The date based sorting on the dashboard is slightly off. Below is what I see if trying to sort so that the most recent transaction appears first: Also, still missing a c on simple send field: Getting set up now to test some simple sends with REAL msc now
|
|
|
yep - if you watch this video it looks like he's describing mastercoin.
|
|
|
Well its been over 30 minutes since my 3 tx's were confirmed on the block chain for the latest purchase offer I tried to create and I still don't see it in the wallet - is it this tx?
I'm attempting to buy 0.227 Test MSC from 1EdAjiApS5cCpHdH4RKPMab1xmMVRWjLvk again using 16rAwebBXhJAM9ALf3fLFbaHKz24r2o3UN
Status: 10 confirmations Date: 11/9/13 21:56 To: 1EdAjiApS5cCpHdH4RKPMab1xmMVRWjLvk Debit: -0.00006 BTC To: 1EXoDusjGwvnjZUyKkxZ4UHEf77z6A5S4P Debit: -0.00006 BTC Debit: -0.00012 BTC Transaction fee: -0.001 BTC Net amount: -0.00124 BTC Transaction ID: 75990828a7f18fe1a6fd1b3baa9e04d6ec665e811c797113a4e3133b7b084b4c
|
|
|
Ok I took a look at your transaction and it's not being accepted because you did not send enough funds. This is a rounding error on Mastercoin-explorer and I will fix this shortly, when I do your transaction should be valid Edit: This is now fixed. Thanks for the report! That explains it. Yes, shows correctly now. Thx! I'm trying another purchase offer now but its taking awhile to show up..will send you the tx for that if it fails to appear. Also, found a typo. When entering a mastercoin address for simple send or purchase offer etc, there is a "c" missing from the mastercoin label (masteroin). Lastly, in case anyone else is eager to try the wallet, I was able to install it fairly easily on Ubuntu 13.04. One catch was getting qtbindings to install. For those unaware, like myself, I learned you must install the development package of ruby (sudo apt-get install ruby1.9-dev) because the base package on ubuntu does not include mkmf. oh, and one other nitpicky thing, when launching the first time in ubuntu and you enter your password and private key. Entering the private key correctly displays the corresponding address however, it is partially covered up by the "Done" button. Can't recall if this was also an issue in OS X, and again, these are minor things, at least to me.
|
|
|
I guess the latest purchase I attempted did not go through despite my sending the BTC - I may have just been to slow as the purchase offer now shows Expired, no payment received. Will that expired purchase offer remain listed there in my wallet indefinitely or should it go away at some point?
Edit: Also, can't wait to see the wallet from Zathras, have a windows vm spun up and ready to go!
Do you have the transaction ids so I can check it out? I've been doing a lot of work on Mastercoin-explorer and perhaps something messed up Sure..tx: a1b5d7c73e9ec345075eb2357c4dbfced610bdac63808f2f0d05fa431e266795 I'll do a couple more tests if possible later tonight.
|
|
|
I guess the latest purchase I attempted did not go through despite my sending the BTC - I may have just been to slow as the purchase offer now shows Expired, no payment received. Will that expired purchase offer remain listed there in my wallet indefinitely or should it go away at some point?
Edit: Also, can't wait to see the wallet from Zathras, have a windows vm spun up and ready to go!
|
|
|
Well..Adam knows him . That's the book and it looks to be the defacto bitcoin book based on the outline. Also cool that Creative Commons will apply so easy for anyone to access.
|
|
|
Love the idea of a spot on LTB - excellent podcast. A quick summary of the concept, direction for more info, and a call for more developers (not to discount the ones we are fortunate to have already).
Been curious to hear Andreas' thoughts on the project..wishful thinking but if enough progress is made it might warrant mention in his upcoming bitcoin book.
|
|
|
I've just released 0.0.6.
Most notable in this release is the fact that you can now send multiple transactions without having to wait for the old one to be confirmed first. It keeps a record of unconfirmed transactions and uses those if no other inputs are available.
I've also fixed superfluouso's problem where a transaction got added multiple times to the dashboard view. If this release is deemed stable I will enable Simple Sends using real coins.
Very Nice! I can confirm purchase offer shows up correctly - I hope whoever 1EdAjiAp... belongs to doesn't mind that I bought a small amount of the test coins from your sell offer as a test. Also, yes, the simple send no longer adds the multiple entries to the dashboard view - this is great. I have a couple nitpicky things I noticed - In the dashboard view, my address gets cut off under where it says "Mastercoin wallet for". I guess the font needs to be smaller or the window larger. - If I sort my sent/receive transactions by date, it appears to just sort based on the calendar day so you may not see the most recent/oldest transaction listed first like you might expect. For example, 28-10-13 will be listed ahead of 08-11-13 as the most recent send. Not clear if this is the case when looking at the order book as there are not any offers listed with an October date, however, I notice the date and time format is different on that view. Great work!
|
|
|
I did a simple send to another address. On the dashboard, the transaction shows up as 3 separate entries: Sold, Bought, and Sent with the same amount I sent listed next to each one.
My balances reflect the correct amount but I was not expecting to see 3 separate entries listed like that for a simple send. Does that make sense?
|
|
|
Couple more items that would be nice to have:
Address book or ability to easily capture/copy addresses
A way to view the expiration time for offers in the order book
On dashboard, transaction details with double click would be nice - tx and sender/receiver address
|
|
|
Playing around with the wallet a bit - submitted a purchase and a couple minutes later a sell. Its been about 10 minutes or so and the sell offer is listed but I haven't yet seen the purchase go through. Are updates still running around 15 min?
Also, it might be nice to be able to pull up TX hashes from the app rather than going to the log file - though assume you intend to add more detail like this in the future...perhaps getting the option when double clicking?
Thinking about getting things going in ubuntu.
Edit: Also while running wallet, my terminal shows:
ruby[44902:d0b] modalSession has been exited prematurely - check for a reentrant call to endModalSession:
Obviously not a ruby expert - is that expected or noteworthy?
Edit2: Appears to again be Mavericks/qt related - so far does not impede functionality of the wallet.
|
|
|
I really had to fight with qtbindings but finally got things going and I finally have a functioning mastercoin-wallet! great work Tachikoma!...will start doing some testing after work.
|
|
|
Well - still kinda stuck. Originally I was running ruby 2.0 with QT5 and later QT4 downloaded and installed via qt-project.org. Could not install wallet so went back, removed QT and attempted to install via brew after doing brew update (also, I was using MacPorts which I first removed). qt install was falling using brew so I was able to install it by using: brew install https://raw.github.com/cliffrowley/homebrew/patched_qt/Library/Formula/qt.rb --HEAD per https://github.com/mxcl/homebrew/pull/23793and that was successful. But still could not install wallet. Thought maybe related to ruby 2.0 so changed to 1.9.3-p448 Now when I attempt to install wallet, I'm still getting smoke qtbinding errors for example: Scanning dependencies of target smokeqtdbus [ 42%] Building CXX object smoke/qtdbus/CMakeFiles/smokeqtdbus.dir/smokedata.o /Users/xxx/.rvm/rubies/ruby-1.9.3-p448/lib/ruby/gems/1.9.1/gems/qtbindings-4.8.3.0/ext/build/smoke/qtdbus/smokedata.cpp:12:32: error: use of undeclared identifier 'DBusError' case 1: return (void*)(DBusError*)xptr; ^ /Users/xxx/.rvm/rubies/ruby-1.9.3-p448/lib/ruby/gems/1.9.1/gems/qtbindings-4.8.3.0/ext/build/smoke/qtdbus/smokedata.cpp:12:42: error: expected expression case 1: return (void*)(DBusError*)xptr; . . . fatal error: too many errors emitted, stopping now [-ferror-limit=] 20 errors generated. make[3]: *** [smoke/qtdbus/CMakeFiles/smokeqtdbus.dir/smokedata.o] Error 1 make[2]: *** [smoke/qtdbus/CMakeFiles/smokeqtdbus.dir/all] Error 2 make[1]: *** [all] Error 2 make: *** [build] Error 2 So that's where I'm stuck now...any thoughtst? Considering setting up on an old macbook but need to free drive space first..
|
|
|
I'm guessing you are on Ruby 2.0 ? How did you install qt? Did you use brew to do it?
Seems to be an issue with Qt/OS X Mavericks/homebrew..have not had a lot of time to sort things out..but working on it and hope to join in with testing soon!
|
|
|
Speaking of press - Here's a nice write up from Vitalik Buterin at bitcoin magazine
|
|
|
|