 Show Posts
|
|
Pages: « 1 2 3 4 [5] 6 »
|
Or one whale are buying his own coins to cause panic and raise volume  |
|
|
|
Anyone knows why ICG is traded for 200 satoshi? It has 25M coins in total and promises bitkey anonymity. Why do u think XST surpasses it and will not go 5 times lower?
We started from the bottom, now we're here. Okay now I understand why you are snapping at ARcoin dev. I looked at the Stealthcoin and I don't find anything better than ARcoin here. Let me give you some details : 1. ARcoin only 500k coins and XST has over 20 million coins. 2. TOR implemented from starting in ARcoin and also in Stealthcoin 3. Only 5% pos in ARcoin but 20% POS in XST. 4. ARcoin has webwallet and androidwallet. XST don't have that. 5. No premine in ARcoin but premine in XST. Yes I agree that there were some problems with wallet staking but Dev has fixed that and very soon bittrex will also enable the wallet again. Even if it is a copy of XST as you say, it is much more cheaper, with low supply and low inflation (POS 5% VS 20%) and active dev , So why should I buy XST ? I would have never come here and said these things but you have forced me to do this. Now stop trolling on ARcoins thread instead focus on your XST. So I like to see when my coin do it like they do it on animal channel. 20%+wow But XST dev proof something, AR not....  |
|
|
|
Only XST |
|
|
|
You have old wallet version. Get v.1.0.4.1 |
|
|
|
Just a suggestion for all of you pressing and constantly asking for updates...DO SOMETHING TO HELP ON YOUR OWN!!!
Good question. What can we do to help? I am minting all the time, that's all. What else can i do? |
|
|
|
Miting work ? I had nothing since 14 july and my wallet is H24 Online  Impossible  Restart wallet, make sure its sync. |
|
|
|
A working wallet might be more important than contests lol
wallet works fine not working at my end as well. a fresh windows 8 install and a fresh wallet installation. kept it open for almost 24hrs now. stuck at block 9026. sometimes it will display the "~NNN blocks remaining" at the bottom and then it'll disappear, which on normal wallets would mean it is synced but the "(out of sync)" message never goes away. then it repeats the cycle. so yeah, it's pretty much broken. do you have any steps to get this to sync properly? delete everything? probably not gonna work at my end because i started clean. Have you tried close wallet, open wallet trick? If you don't need your address and don't have money there then clean. |
|
|
|
I try to compile wallet for ubuntu 64
and no success
src/qt/bitcoingui.h:4:23: fatal error: QMainWindow: No such file or directory
#include <QMainWindow>
^
compilation terminated.
make: *** [build/bitcoin.o] Error 1
plese i wont LINUX wallet like BC blackcoin, DRK, GUE, VRC, BTC, LTC, wallets
For example (Ubu 14.4; Mint 17): apt install libboost-all-dev qt4-qmake libqt4-dev build-essential libqtwebkit-dev libssl-dev libdb++-dev libminiupnpc-dev libprotobuf-dev libqt5gui5 qttools5-dev qttools5-dev-tools libqrencode-dev libevent-dev libdb4.8-dev libdb4.8++-dev git clone https://github.com/rat4/blackcoin.gitcd blackcoin QT5 /usr/lib/x86_64-linux-gnu/qt5/bin/qmake or QT4 qmake make That should work for BC, DRK, GUE, VRC, LTC. BTC is different, you have to read readme files. np  |
|
|
|
Which situation is better? Old one:  or with new block .dat files:  In old .dat i am stuck at block 8927, in new, i don't have my money. What do you think? You could go with the new wallet. you will see your money again when stake is finished. Hope you're right. For now i see same situation, 0 confirmed but 60 more blocks downloaded. After that i will send my coins on Bittrex. It's too dangerous, keep them in this crazy wallet 
Anyone else having trouble getting wallet to sync?
It's stuck and the number of blocks remaining seems to jump up and down randomly.
Yeah sure its my fault, but I have 56k coins stuck in stake on 1.0.0.1.. When I try to update and delete block index, but keep wallet.dat, It only gives me the coins that are not in stake. My stake becomes 0. you need to: step 1: open console step 2: dumpprivkey <address> for each address you have, be sure to write this down. step 3: close xst-qt, goto appdata, back up wallet.dat to a safe location, delete everything in the folder. step 4: make sure you are on v 1.0.3.1 step 5: open qt, may take a little to find nodes, since we cleared tor folder in step 3 it has to do the full re-init of the tor network. step 6: open console. type importprivkey <privatekeyfromstep2> for each key you got in step 2 step 7: wait for sync and watch your coins come back. Thanks! That helped, but... I had to take a step 7 before step 6. When I imported the key too early again stuck in one of those difficult blocks. Now, I'm waiting for the pump  |
|
|
|
Which situation is better? Old one: or with new block .dat files: In old .dat i am stuck at block 8927, in new, i don't have my money. What do you think? You could go with the new wallet. you will see your money again when stake is finished. Hope you're right. For now i see same situation, 0 confirmed but 60 more blocks downloaded. After that i will send my coins on Bittrex. It's too dangerous, keep them in this crazy wallet |
|
|
|
Which situation is better? Old one: or with new block .dat files: In old .dat i am stuck at block 8927, in new, i don't have my money. What do you think? |
|
|
|
Number 8 This coin need new dev.
|
|
|
|
wait a minute , What happend to polish coin ? or polish ppl will have 2 cryptocurrencies ? you thought about that ? lol
Of course we thought about that, but we are convinced that we will make more than other polish cryptocurrencies. wait a minute , What happend to polish coin ? or polish ppl will have 2 cryptocurrencies ? you thought about that ? lol
There are three cryptos for Poland right now: PCC (Polish Coin), PLC (Polcoin), PLNc (PLNcoin)...  So what's next? Where is KGW guys? PLC is down. About others I write above. PLC & PLNc - create same people, see https://cryptocointalk.com/topic/3402-polcoin-plc-information/same webside http://polcoin.org/ |
|
|
|
|
Its new crypto never sell it so fast. Now you can mine much but in two weeks it can be harder.
|
|
|
|
You'll need to create a billioncoin.conf file in the %appdata%/billioncoin/ directory and add that there. Yea. create billioncoin.conf in /Users/**youruser**/AppData/Roaming/BillionCoin directory and put it inside this file. |
|
|
|
|
Put this in your billioncoin.conf and wait 15-30 min:
rpcuser=username
rpcpassword=password
rpcport=22565
server=1
daemon=1
listen=1
addnode=118.252.93.35:22576
addnode=162.243.41.224:22576
addnode=180.141.141.189:22576
addnode=134.249.14.144:22576
addnode=node.billioncoin.net
addnode=182.100.67.52:22576
addnode=182.100.67.42:22576
addnode=182.100.67.47:22576
addnode=114.104.231.130:22576
addnode=122.136.242.69:22576
addnode=112.113.245.114:22576
addnode=183.216.239.249:22576
addnode=180.123.52.147:22576
addnode=180.142.63.213:22576
addnode=143.176.84.142:22576
addnode=219.137.208.34:22576
addnode=83.26.75.199:22576
addnode=110.90.13.194:22576
addnode=183.70.19.87:22576
addnode=223.203.188.131:22576
addnode=122.136.242.69
addnode=5.249.152.159
addnode=75.128.104.5
addnode=178.49.118.233
addnode=46.150.89.173
If working then send something here:D
BVNwoRNK8gEbpLHTYTpv2DuW2K7TRMoHAL
|
|
|
|
I want to compile FoxCoin from souces on Windows, but Im having really hard time with it. This help me in Linux meaby it will work for you also 3. Fix memecoin-qt.pro There is a little error in the memecoin-qt.pro file which forces make to use a very specific version of boost. Open ~/src/Memecoin/memecoin-qt.pro and change the line that says LIBS += -lboost_system-mgw46-mt-sd-1_53 -lboost_filesystem-mgw46-mt-sd-1_53 -lboost_program_options-mgw46-mt-sd-1_53 -lboost_thread-mgw46-mt-sd-1_53into LIBS += -lboost_system -lboost_filesystem -lboost_program_options -lboost_threadBOOST_LIB_SUFFIX=-mgw46-mt-sd-1_53should become BOOST_LIB_SUFFIX=and deleting the following lines isEmpty(BOOST_LIB_SUFFIX) {
macx:BOOST_LIB_SUFFIX = -mt
windows:BOOST_LIB_SUFFIX = -mgw44-mt-s-1_53
}np |
|
|
|
Check my logo  Good for wallet. |
|
|
|
|
