Merry Christmas!

Does AeroME have a release date?

Aero Community,

The parties involved in the coin-swap process, like exchange operators, etc we have all been brought up to speed. We are all ready to start the coin-swap process.
The coin swap process is automated. meaning, you must have all AERO coins up in bittrex account on the 25th December 2014 ready for the swap on the 26th December.

We will begin the swap phase on the 26 Dec 2014  (Midnight PST) so another word the 27th of December the AERO > AM Coin-swap will be over.



Steps to follow

1) Sign up to Bittrex and create an account (if you have not already done so)
2) Send your AERO coins TO your Bittrex wallet BEFORE the start of the coin-swap.
 
3) During the coin swap phase you will have your AERO coins (which are in your Bittrex account) swapped over to AeroME (AM) "automatically" as set out prior based on the following ratio set at:

4) AERO Blockchain and nodes will remain up and active for 30 days AFTER the END of the coin-swap which is on (Sat 16th Jan 2015) After this time period the AERO BC will die !

5) It won't get converted until 26th @ (23:59:59 PST) and all they will do is run a script that checks Aero balance and determines amount of AM and places that balance into accounts

6) The AERO Market will remain open until the START of the coin-swap [26th December 2014 (midnight PST)]



If you have any questions regarding the information above feel free to ask for more details..

Thanks,

Majika

Here's timeframe for in-wallet FindCoins distribution (40k/hour):
(I remember a lot of guys asking this question for FindYou again and again, so here it is)

22:00 UTC December 26 2014 - 08:00 UTC January 6 2015

I've heard of some thing called Wine  anyway, as far as I know, we'll have qt linux binary for download for sure. Not sure about daemon - gotta ask e1ghtSpace or Quadmium

I agree. temporary closed source to prevent fraud is acceptable in my opinion. people will abuse this cheat so I think it adds to your credibility to keep it closed, rather than 'being open' about it and have people cheat your efforts into oblivion.

my vote 10 Days (40K/Hour), everyone will have enough time to collect coins.

btw did i miss the pos vote?

Guys, here's little "Coming soon" site for FindCoin:
www.findcoin.info


Please subscribe if you don't want to miss coin launch and start of distribution.

After launch this will be FindCoin's official site, so please bookmark it / remember it 

No one is willing to answer .Every member from find community should check their computer out for this file (FindYouCoinURI ) it doesn't matter what operating system you are using  just show hidden file and search for it by name under All users\App data ,it is not the same one in your username where you find the wallet.dat !!

I'm still receiving free coins to my wallet every hour.  Why in the world would I buy any at this point?

If you got greedy and wanted more than what everyone else had then put them in your wallet and hold them

Great I send you 10k ENRG
I have to post you address here e2UVyjwMWswbEZTzHBc3Yi1to2KVod2taS
There is budget left for 22 PI's

Here is the copy past adapted to EnergyCoin, maybe we can adapt it a little bit more

I think this is clear enough, but one of us should do all the steps to see if some steps requires some clarification:





EnergyCoin eco-green node deployment project on Raspberry PI

Here's how to get the 10K ENRG tip:

1. Take a fresh image for your raspi, like raspbian or other light linux and write it on your SD card.
Help to prepare SD card: http://elinux.org/RPi_Easy_SD_Card_Setup
RASPBIAN sources and others: http://www.raspberrypi.org/downloads/

Go to https://github.com/energycoin/energycoin/releases and download ARM 1.1.2 build EnergyCoin-1.1.2-arm.tar.gz (you will also find the sources to build on your own if you want)
In order to run this version under Raspberry Pi you should install dependencies using following commands in terminal:
•   sudo apt-get update
•   sudo apt-get install libboost-system1.49 libboost-filesystem1.49 libboost-thread1.49 libboost-program-options1.49 libqt4-gui libqt4-network libdb5.1++ libminiupnpc-dev
•   tar xvf EnergyCoin-1.1.2-arm.tar.gz
•   ./energycoin-qt

On your internet box or router, forward port TCP 22706 to your raspberry (allow your PI to be a full node, distribute blockchain and connect to 9 nodes or more)


2. Post in this thread with a photo of your Pi, and also a photo of your Pi screen.
The following should be visible in the photo of your Pi's screen:
A: A window showing your Raspberry Pi serial number
(using “cat /proc/cpuinfo” in terminal)
Help here: http://raspberrypi.stackexchange.com/questions/2086/how-do-i-get-the-serial-number

B: The EnergyCoin-QT wallet with the green checkmark in the lower right hand corner indicating that the RPi is now a currently synced node or the "getblockcount" command in the debug window.
C: The EnergyCoin-QT debug window open showing the command "getconnectioncount" having been typed in at the bottom and the window showing 9 or more connections.

3. Send a PM to crypto4jan with your EnergyCoin address so he can send you the 10K tip

If you follow the above instructions correctly, you will receive your tip! A big thank you to crypto4jan for donating the first 250K ENRG that will be used for tipping.

________________________________________

FAQ

What is a Raspberry Pi?

A Raspberry Pi is a low cost, credit-card sized computer that can be plugged into a monitor/tv, and a standard keyboard and mouse (http://www.raspberrypi.org/help/what-is-a-raspberry-pi/). It is used in programming education and also has a wide variety of other uses. Its low energy consumption makes it perfect for running an EnergyCoin node.

What model of Raspberry Pi should I buy?

Model B is the most used at the moment; there is also a newer B+ model but either is sufficient for running an EnergyCoin node.
You will need an SD card (it's best to buy a class 10 or better), and a micro usb power supply (the same used by android phones and numerous other devices). An ethernet cable is used to connect to your router, and if you are not running it "headless" then you need a USB keyboard and mouse, as well as a monitor/tv that can be connected to your Pi via HDMI cable. A case is not necessary but is useful for protecting your Pi.

What is the purpose of this project?

The purpose of this project is to encourage the use of Energy on Raspberry Pi, while also increasing the number of full nodes on the network. A connection count of more than 8 indicates that port forwarding is enabled and that you are running a full node (this benefits the network by distributing the EnergyCoin blockchain to others). Minting is beyond the scope of this project.

Can I mint on my Raspberry Pi too?

Yes, you can mint. However, the goal of this project is only to set up full nodes. You may wish to take extra security precautions if you also want to use your node for minting.