Show Posts
|
Pages: [1]
|
link not working, can you fix ?
|
|
|
i have been used claymore for my rigs but i have some of them with 4gb cards i have tested a rig: 6 x amd rx 570 4gb
with claymore this setup i have made 187.3 MH/s -cclock 1200,1200,1220,1220,1200,1200 -mclock 2000,2080,2100,2100,2050,2060 -cvddc 900 -mvddc 900 -ethi 16 -tt -100 -eres 1 -gser 2 -y 1 -tstop 90 -rxboost 1 -strap 1
and with phoenixminer i have only 183.32 MH/s -cclock 1200,1200,1220,1220,1200,1200 -mclock 2000,2080,2100,2100,2050,2060 -cvddc 900 -mvddc 900 -tt -100 -eres 1 -gser 2 -acm -tstop 90
What i am missing ?
|
|
|
You have error OpenCL error -4 You need to increase your virtual memory from control panel - system - advanced system settings - advanced - settings - advanged - change I am RIG has 6 - RX 570 cards. If I use Claymore V15. I am getting DAG error. Please tell how to resolve this. All 6 card Sapphire 11266-04-20G Radeon PULSE RX 570 4GB GDDR5 DUAL HDMI / DVI-D /ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s GPU0, OpenCL error -4 - cannot write buffer for DAG GPU 0 failed Setting DAG epoch #328 for GPU0 ETH: 04/10/20-00:11:40 - New job from eu1.ethermine.org:4444 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s GPU 3, GpuMiner cu_kd2b failed, not enough memory GPU0, OpenCL error -4 - cannot write buffer for DAG GPU 5, GpuMiner cu_kd2b failed, not enough memory GPU 1, GpuMiner cu_kd2b failed, not enough memory ETH: 04/10/20-00:11:44 - New job from eu1.ethermine.org:4444 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s GPU 3 failed GPU 5 failed GPU 0 failed
|
|
|
Hi!
Anyone experienced GPU0 ( rx 474-574) hashing at 1.3Mhs or 0.0 Mhs instead of 30 ? Maybee its DAG size issue ?
Reboot fixed it, but this dont feel good.
Same problem here mining ETC, one video card is 0.0 or 1.3 MHs i think the problem is with claymore i see that all the cards have dcri 30 if you change the dcri with + and - the video card (that have 0 MH/s) is fixed
|
|
|
37 200 000 000keys/s (no ... I don't do mistake... is this thirty seven trillion two hundred million keys per second) you want to write 37 200 000 000 000 ? (13 trillion) with this power keys per sec you will resolve in only 17 hour bit 62 bit 62 have only 2305843009213693951 keys to verify I'm sorry, I totally misjudged ... I do not know where it came from :-) Here are the correct values based on my resources: Full 2^62 = 2305843009213693951 = two quintillion three hundred five quadrillion eight hundred forty-three trillion nine billion two hundred thirteen million six hundred ninety-three thousand nine hundred fifty-one My power = 248000000000 = two hundred forty-eight billion keys/s 2305843009213693951/248000000000=9297754sec=154962min=2582hours=107days I Agree, it is 107 days. By "Full 2^62 = 2305843009213693951" you surely mean that : Full #62 puzzle range has 2305843009213693951 keys to check, which is actually 2^61... 4611686018427387903-2305843009213693952 = 2305843009213693951
|
|
|
248000000000 amazing, is allot of power to achieve this i need 300 x GeForce Rtx 2080 TI
|
|
|
37 200 000 000keys/s (no ... I don't do mistake... is this thirty seven trillion two hundred million keys per second) you want to write 37 200 000 000 000 ? (13 trillion) with this power keys per sec you will resolve in only 17 hour bit 62 bit 62 have only 2305843009213693951 keys to verify
|
|
|
62 estimat?
62 begin from 2305843009213693952 to 4611686018427387903 in binar from 10000000000000000000000000000000000000000000000000000000000000 to 11111111111111111111111111111111111111111111111111111111111111
|
|
|
#63 - 1NpYjtLira16LfGbGwZJ5JbDPh3ai9bjf4 Hex PK: 0000000000000000000000000000000000000000000000007CCE5EFDACCF6808 Private key: KwDiBf89QgGbjEhKnhXJuH7LrciVrZi3qYv5Z9J7hv7VYYN3XL3Y
62 is still in progress ... I just found 63 faster :-)
What do you use for searching? Same as previous keys found by me (#59,#60,#61) - the key was found with the BitCrack application Interesting, what speed you have on what video card? I have rx560oc and reach only 50Mkey/s acording my calculation if you scan all 62 bit range is so much years. Are you scan small pieces of 62bit range or all ? Thanks Edit: Sorry for my bad english,it isnt my native language. For searching for keys I have adapted Tesla working cards that I have at my disposal in the company (which also means no energy costs). I scan the given space in full, and the total speed with which I carry out the search process is 37 200 000 000keys/s (no ... I don't do mistake... is this thirty seven trillion two hundred million keys per second) With this power 37 200 000 000keys/s you will find the 62 bit in 717 Days
|
|
|
good lord, Claymore, I have rx480 8 gb samsung, using latest 14th ver and reaching only 28.8mh/s, any help to see those 33mh/s?
I use "-strap 1@2250" or even "-strap 3@2250" for these cards, read Readme for more details. Hi Claymore what is the maximum strap number we can use? Above is 3, and I see in other of your posts 4. Can we go beyond? i have tested saphire rx480 8gb samsung with -strap 1@2250 and make 32.4 Mh but the only problem is that apears allot of GPU Memory Errors on HwiNfoClaymore you don't have any errors with mcclock 2250 ?
|
|
|
When the computer restart and claymore dual start, GPU0 have 30mh and the others GPU have 26MH! If i close claymore and start again the .bat file, all the GPU have 30mh! Why is that ? Is a bug in claymore 10.0 ? Tested in win 10 32 bit with rx580 8gb and 4gb, all the rigs make the same problem and need to close miner and start again!
|
|
|
|