Hi

I just got Windows 10 update and my hashes went down from 180 to 107 on 6x rx580

anyone with the same problem, solution maybe?

Hi

I've been mining ETC on ethermine now for a couple of months. I done some bios mod and overclocking and got 28Mh and then it went down to 21, so I recently did dagfix and now doing no more than 25Mh.

I have to questions now if you guys can help:
1. Do you think I can get more hashpower now?
2. Is there any other alt that is significantly more profitiable to mine now with this gear?

Thanks a lot guys!

JAXX SUPPORT:
Why can't I send ETC out of my wallet? (I'm getting an "Error:" message!)
You may not be able to send ETC transactions if you're receiving mining rewards or if you have firewall, Tor or VPN enabled.

So... I am unable to send my ETC. I am looking for a wallet now that I can upload my private keys to. Do you guys know any that would be good for that?

Thanks!

I was mining ETC to Jaxx not knowing it's not a good idea.

How do I upload private keys to a different wallet and what wallet is the best one to do that?

What wallet can I upload my private keys to transfer all of my Jaxx coins to?

Any details on rom and under/over-clocking? Cheers!

no. should i always reinstall after flashing bios?

I didn't brick them. I was thinking replacing bios from USB would be more effective. I am not sure if it's necessary. I just don't know what to do as after flashing bios hashing dropped to 12Mh and then after loading the backup rom it remained at 12Mh. Everytime I reboot my computer my core and memory clock are on the lowest setting and I have to reset them in afterburn before mining. So I didn't really brick them but I am looking for a way to get them to the 'out of the box' state that would work for me.

I am hoping to get more than that if possible cards are still pretty new to the market.

When I went down to 12 I then copied 1:1650 to 1:1750 and 1:2000 - resulting in coming back to 24Mh. I am thinking now about "unbricking" the cards with bootable USB and then copying the strips like I did previously. Has anyone has experience with 4gb hynix cards?

Hi,

I have a rig with 6 x rx580s that started mining at 24Mh out of the box. I experimented with the bios a little bit, got it down to 12, now it's back at 24 and I am a little depressed as I can't get more than that and I  tried for the last two days. I will appreciate all help, thanks.

can I power two cards with one 8pin - 6+2 & 6+2 cable? just using one PSU

If I do that should I also fill 6 pin slots in both cards?

also is that ok (warning signs and message:

This device cannot find enough free resources that it can use. (Code 12) If you want to use this device, you will need to disable one of the other devices on this system.

?

Thank for help! I have Asus prime Z270-A and I connected 5 cards. I am not sure what to do now with the 6th one as I used one of the 8pin slots in the PSU for the processor on my mother board. Hence a question.

Can I use 1 of my 8 pin cables to connect two cards via 6+2 ending or maybe use a 6 and 8 pin cable to connect power the processor (6pin in the PSU and 8 pin in the motherboard)?

Hi guys I am building new, first rig.

 6 x sapphire RX580 nitro+ gb (over 0.6m USB 3.0 PCI-E 1x to16x Extender Riser Card Adapter with SATA Power Cable) and not sure how to plug them. I have win 10 now and one of the GPUs in the main slot in of the motherboard. I want to use my hx1200i to power it all but I am not sure if possible as I am not sure which cables/slots use properly

1. is 6 x 6pin slots and 6 x 8 pin slots enough to do that?
2. should I plug them 1 by 1 restarting my pc everytime or should it be okay to just plug the other 5 at the same time and windows will detect them?
3. if not then I have second PSU 650v and I am wondering if I can mix cables randomly, like plugging one 6 pin cable from PSU into one card and 8 pin cable from another PSU in the same card?

Thanks for the answer!