Show Posts
|
Pages: [1] 2 »
|
can i ask what is the equivalent of "-allpools 1" of claymore on Phoenix Miner
i cant seem to make phoenix miner work without it, claymore works if i added it
|
|
|
Cuda 9.2 and up are now the default on most miners. You'll need at least 396.54, which is recommended on 0.6-01 (and above). Start a Hive Shell session Run the following commands; Note that logs should be turned back off after this procedure if you're running hive off a USB stickOnce you reboot start a Hive Shell session again. Run the following; systemctl stop hivex miner stop apt update nvidia-driver-update The installation could take up to around 10 minutes on SSD (depending on your internet connection speed) and takes longer on USB stick. Reboot the machine again once done. On some systems, OC and FAN settings may fail after a driver upgrade. This can easily be fixed. Start a Hive Shell session Run the following; systemctl stop hivex miner stop apt-get install --reinstall -y nvidia-settings reboot All should be working again. Let me know how it goes! phoenixminer exited, waiting to cooldown a bit Phoenix Miner 4.2c Linux/gcc - Release build -------------------------------------------- CUDA version: 10.0, CUDA runtime: 8.0 /hive/miners/phoenixminer/h-run.sh: line 23: 2896 Segmentation fault ./PhoenixMiner phoenixminer exited, waiting to cooldown a bit Phoenix Miner 4.2c Linux/gcc - Release build -------------------------------------------- CUDA version: 10.0, CUDA runtime: 8.0 /hive/miners/phoenixminer/h-run.sh: line 23: 2965 Segmentation fault ./PhoenixMiner phoenixminer exited, waiting to cooldown a bit Actually, just one command is pretty sufficient. Goes brilliant on recent Hives like 06-4x. Yes, in most cases just running the is enough, but the above steps ensure chances of things going wrong are kept to an absolute minimum. Especially in cases where individuals come from older builds. after upgrading, following the steps; i still got the error 0.6-51@190609 4.13.16-hiveos Kernel version N418.74 P106-100 phoenixminer exited, waiting to cooldown a bit Phoenix Miner 4.2c Linux/gcc - Release build -------------------------------------------- CUDA version: 10.0, CUDA runtime: 8.0 /hive/miners/phoenixminer/h-run.sh: line 23: 2896 Segmentation fault ./PhoenixMiner phoenixminer exited, waiting to cooldown a bit Phoenix Miner 4.2c Linux/gcc - Release build -------------------------------------------- CUDA version: 10.0, CUDA runtime: 8.0 /hive/miners/phoenixminer/h-run.sh: line 23: 2965 Segmentation fault ./PhoenixMiner phoenixminer exited, waiting to cooldown a bit please help
|
|
|
phoenixminer exited, waiting to cooldown a bit
Phoenix Miner 4.2c Linux/gcc - Release build --------------------------------------------
CUDA version: 9.0, CUDA runtime: 8.0 OpenCL driver version: 17.50-511655 Unknown OpenCL driver version! Hashrate and stale shares may suffer OpenCL platform: OpenCL 2.1 AMD-APP (2527.3) Available GPUs for mining: GPU1: P106-100 (pcie 1), CUDA cap. 6.1, 5.9 GB VRAM, 10 CUs GPU2: P106-100 (pcie 3), CUDA cap. 6.1, 5.9 GB VRAM, 10 CUs GPU3: P106-100 (pcie 4), CUDA cap. 6.1, 5.9 GB VRAM, 10 CUs /hive/miners/phoenixminer/h-run.sh: line 23: 17457 Segmentation fault ./PhoenixMiner
phoenixminer exited, waiting to cooldown a bit
is this the correct miner log? can't seem to find more details on it. how do i correct it?
thanks
What driver version are you currently running? 4.13.16-hiveosKernel Version N390.48 P106-100 × 3 is it correct driver for p106?
|
|
|
phoenixminer exited, waiting to cooldown a bit
Phoenix Miner 4.2c Linux/gcc - Release build --------------------------------------------
CUDA version: 9.0, CUDA runtime: 8.0 OpenCL driver version: 17.50-511655 Unknown OpenCL driver version! Hashrate and stale shares may suffer OpenCL platform: OpenCL 2.1 AMD-APP (2527.3) Available GPUs for mining: GPU1: P106-100 (pcie 1), CUDA cap. 6.1, 5.9 GB VRAM, 10 CUs GPU2: P106-100 (pcie 3), CUDA cap. 6.1, 5.9 GB VRAM, 10 CUs GPU3: P106-100 (pcie 4), CUDA cap. 6.1, 5.9 GB VRAM, 10 CUs /hive/miners/phoenixminer/h-run.sh: line 23: 17457 Segmentation fault ./PhoenixMiner
phoenixminer exited, waiting to cooldown a bit
is this the correct miner log? can't seem to find more details on it. how do i correct it?
thanks
|
|
|
^ thanks! ill check it, and post it if i find it hard to understand
|
|
|
phoenixminer exited.. waiting to cooldown a bit
any ideas where to look at ? i cant run hiveos properly this time.
using latest update
thanks
Check miner log for exact error. how do i pullup miner log of phoenixminer on hiveos? thanks
|
|
|
phoenixminer exited.. waiting to cooldown a bit
any ideas where to look at ? i cant run hiveos properly this time.
using latest update
thanks
|
|
|
using hiveos running with the latest hive OS anyone has encountered these error
phoenixminer exited, waiting to cooldown a bit
using p106 cards i cant seem to run the hiveos on phoenixminer
thanks
|
|
|
i get error on what i put in the config when i launch the miner.
i can connect to ssl in xmr but 'cannot login to pool'
any idea what am i missing?
|
|
|
i have question.
i cant run the program, getting parse error dtsm_miner.bat saying something like parse "error on temp-target 80"
dtsm miner wont run using its default "--temp-target 80" in config_dtsm.ini
i had to remove it to run the program, anyone knows how to correct it? thanks
|
|
|
what wallet do you use when mining ELLA? i believe cryptopia doesnt allow to receive from mining pool?
thanks
|
|
|
thanks for the info, ill check him out, i hope someone was able to make it work with an extender
|
|
|
does smos support using pcie extender, say im using asrock 13gpu and will an extender to get 15 cards, is there any bios settings needed to add ?
thanks
I've tried this myself, and I saw BBT try it, and the H110 won't POST at all with the expander. Doesn't matter what OS it won't even get to the BIOS. SMOS does support those expanders though since I have one in another rig. what is BBT ? so you mean it could be a limitation of the motherboard.?
|
|
|
anyone have tried using PCIE Extenders to run more than 13GPU with SimpleminingOS(15max) ?
is there any settings in bios needed to be set to make the PCIE Extender work ?
thanks
|
|
|
does smos support using pcie extender, say im using asrock 13gpu and will an extender to get 15 cards, is there any bios settings needed to add ?
thanks
|
|
|
does smos support 1050ti ? how many gpu is the max smos can it support ? thanks
|
|
|
what is the maximum GPU can smos handle per rig ? 15 GPU ?
thanks
|
|
|
tried 2 16g usb3.0 drive. burned the OS(for nvidia cards) and changed email address, when booting, both of them are not being detected.
any suggestion? thanks
motherboard is tb250-btcpro, settings are set as it should be. 4g ram g4400
|
|
|
what do you do guys, i tried 2 16g usb3.0 drive. burned the OS(for nvidia cards) and changed email address, when booting, both of them are not being detected.
any suggestion? thanks
motherboard is tb250-btcpro, settings are set as it should be. 4g ram g4400
|
|
|
can SMOS individually setup core for each cards ?
for p106 ? i was trying it, i find it not working.
|
|
|
|