Hi Guys, I'm facing some hashrate dropping problems which need you to help on.



I have some rigs with 1070/1070Ti 8GB cards which already mined for 3 years.



But after I switched from Claymore(It's such a pitty Mr.Claymore stops updating, wish him all the best) to new miners like PhoenixMiner, T-Rex, GMiner...etc. I found out that all my rigs hashrate drop.



When Claymore miner is still working, my rigs with 8 cards of 1070Ti can run at 274 Mh/s with 34.6 Mh/s each card. But now with new miners, it only gets 252 Mh/s with about 32.5 Mh/s each card.



When Claymore miner is still working, my rigs with 8 cards of 1070 can run at 245 Mh/s with 30.5 Mh/s each card. But now with new miners, it only gets 205 Mh/s with about 25.5 Mh/s each card.



I'm wondering if this is affected by different miners or bigger DAG File size or just GPUs get aged?



I'm grateful for all your suggestions and opinion sharing.



Thank you for the help guys : )



PS. I'm mining with Windows 10 64-bit

I already moved my miners from Nanopool to Ethermine

Hi guys,

I'm getting this error with Claymore 15.0 on Nanopool now, is tehre anyone getting the same error? I didn't change any parameters and setting before and after fork of ETH.

"Probably you are trying to mine Ethereum fork. Please specify "-allcoins 1" or "-allpools 1" option. Check "Readme" file for details.
Pool sent wrong data, cannot set epoch, disconnect
ETH: Connection lost, retry in 20 sec..."

Thank you guys.

I tried to set EthDcrMiner64.exe to run as administrator in properties page.

The window just pop up and close rapidly after I double click the batch |o|.

I'm using Win10 1709 and 1803 version. Is it too old to cause this issue?

Thank you mate : )

Got the same problem either.

it shows "Driver is in use, try to start miner with "-driver uninstall" parameter" when I add "-strap 1" in batch file

I try to add "-driver uninstall" in the file and runs it but it shows it require Administrator to access it.

I add "runas /user:Administrator" in batch file but it just can't run appropriately and close the window rapidly.

My cards are gtx1070 with latest driver version 436.3 in Win10 64bit

May anyone please let me know how can I solve this problem?

Thank you for the kindly help.

Hi guys, I'm new to Burst mining.

I just finished plotting my drive and tried to started mining with Blago miner, but it hangs in the following screen and keep showing error message shown below in the log file.

22:11:11 *! GMI: get mining info failed:: 10060
22:11:13 *! GMI: get mining info failed:: 10060
22:11:15 *! GMI: get mining info failed:: 10060

I've uploaded the pictures of hang screen, log file, miner config file in link below:





I've tried different pools, but still the same results, the application is in white list of firewall.

Also the Reward Recipient has been set correctly and waited for almost 20 blocks.

May someone please let me know what's wrong with my settings? Thank you for the big help.

I think Unimining might have chance stealing hashpower too, the Actual XVG got from Unimining is almost 50% less than Antminepool.

The 24hr actual profit shown on website of these both pools have huge different.

The 24hr Actual shown on table of XVG Blake2s is keep going down from 0.032 to 0.029 now, but in Antminepool is going up from 0.038-0.041, it's almost double. May the owner of pool please take a look into this issue? The profit difference is too much. Thank you.

The 24hr Actual shown on table of XVG Blake2s is keep going down from 0.032 to 0.029 now, but in Antminepool is going up from 0.038-0.041, it's almost double. May the owner of pool please take a look into this issue? The profit difference is too much. Thank you.

I have same problem too. According to Whattomine I should get 400 XVG one day, but Unimining only give me 200 which is only 50% of my hash power.

Antminepool gives correct numbers, but it's often full

Anyone suggest other pools?

Hi~Guys,

I'm using Claymore DualMiner 10.3 Now, and one of my rig keep showing message as below:

PASC: 01/17/18-22:48:21 - New job from pasc-us-west1.nanopool.org:15555
PASC: 01/17/18-22:48:21 - New job from pasc-us-west1.nanopool.org:15555
PASC: 01/17/18-22:48:21 - New job from pasc-us-west1.nanopool.org:15555
PASC: 01/17/18-22:48:21 - New job from pasc-us-west1.nanopool.org:15555
PASC: 01/17/18-22:48:22 - New job from pasc-us-west1.nanopool.org:15555
PASC: 01/17/18-22:48:22 - New job from pasc-us-west1.nanopool.org:15555
PASC: 01/17/18-22:48:22 - New job from pasc-us-west1.nanopool.org:15555
PASC: 01/17/18-22:48:22 - New job from pasc-us-west1.nanopool.org:15555

And the Hashrate of ETH on Nanopool is 0 because it just keep trying to get job on PASC.

The log is in file below, it seems the log file is strange on getting PASCAL jobs:

https://www.dropbox.com/s/imgajx2ppgxsuba/PASCAL_Error_log.txt?dl=0

Does anyone ever encounter this problem?

Thank you guys.

Umm...looks like you're experiencing the same issue.

The reject rate is high but won't cause so much difference.

Accounting to your measurement on share difference, I guess there are two possible situation.

1. Nanopool take some shares as 2% commission fee.
2. The worst case is if the difference is much more than 2%, then it might be some "disappearing" share(hashpower lose) between Miner & Nanopool's communication.

Anybody else has the same issue? Or got any idea about it?

Hi Guys,

I've been mining PascalCoin on Nanopool for about a week.

I've tried all their servers and seems only EU1 and US West have best delay around 300ms which is still quite high.

My share rejection rate is around 1.6%, is this value higher than normal? I'm afraid the high delay time causes it.

The hashrates of my 3 rigs shown on Claymore are 1300Mh/s, 3700Mh/s, 2500Mh/s, the total should be around 7500Mh/s.

But on Nanopool average hashrate is always around 6200Mh/s. Even I take 2% fee and 1.6% rejection into account it's still lower than expected.

Is there anything I can do to fix the low hashrate issue? Or is there any other recommended PascalCoin Pool?

Thank you for all the kindly help guys. : )

Hi Guys, I'm new to the mining world.

I just bought 4 MSI RX-480 Armour 8G OC cards and try to set up my first rig.

I tried to use Claymore's miner 10.0 and 10.2 but it all hangs at the line: "POLO/SOLO" version as shown in below link.

https://imgur.com/a/IGTqa

I also tried to use the start.bat which generated by nanopool automatically but still the same result.

I tried to use "-id" parameter to use only 1 GPU to mine, but still get the same result.

Has anyone faced this situation before? May you please tell me how to fix it?

All the cards are original settings, I haven't mod the bios or verclock yet.

I disabled the ULPS of AMD cards by afterburner, but I see one GPU still has various clock speed around 300~900MHZ, other three cards are all fixed at 1291 MHZ which it should be.

Why does that card has various clock speed even I disable ULPS? Does anyone has any idea?

Thank you for all the kindly help & answers, good day.