Hi,

congrats to the helium team. After wating for more than one year I just finished my installation and conf of my MN.

Followed the instructions of
https://www.heliumlabs.org/v1.0/docs/masternode-setup-guide

MN is synced and Local Wallet says MN is "enabled"
helium-cli masternode status returns "successfully started"

helium-cli getinfo returns "Staking Not Active"
Is that normal?
How long does it normally take to switch to "staking"?

got the same message

does anybody else have connection problems on slack?

I installed agama 0.2.24g.
KMD wallet synced and working fine.
When activating JUMBLr wallet and sync is complete, the Airdrop from september is not shown.

Looking at the address in JUMBLr explorer, the correct amount is shown.

Any help?

Currently there are about 560 MN online.
So it's 3600/560=6.43 VIVO/day
6.43*365=2346 per year
so indeed more than 200% ROI

considering the "watchdog issue" it's currently a little bit more for those whose MNs are online and fully synced

To get a little bit more confidence in this coin back:

Here is my Configuration:
Cold wallet installation with Linux VPS (Ubuntu 16.04)  and Windows wallet v0.12.1.7
I cant’t say anything about different configurations. Hopefully, there are others that can help with that.
Up to now, the MNs are running. Sometimes I get the WACHDOG_EXPIRED, but it disappears again.

Here is what I did:
Linux-VPS:
1.   Masternode VPS setup guide http://www.explorerz.top/compile.html
2.   Cold Node Masternode setup guide : http://www.explorerz.top/vivo-mn.html
Current file locations: vivo-cli, vivod: /root/vivo/src
data-dir (vivo.conf, blocks, chainstate, mnpayments..dat,...): /root/.vivocore
3.   Added current nodes from https://www.cryptopia.co.nz/CoinInfo/?coin=VIVO
to my vivo.conf (in /root/.vivocore/vivo.conf on VPS)
and startet sync: /root/vivo/src/vivod –daemon -reindex
4.   Followed the sentinel guide: https://www.vivocrypto.com/vivo-technologies/masternodes/sentinel-guide/
Current file locations of sentinel files: /root/.vivocore/sentinel
After Step 3 complete, running:
cd /root/.vivocore/sentinel
venv/bin/python bin/sentinel.py
5.   Get the mnchecker script: https://github.com/Aziroshin/mnchecker
Location of mncheker script: /root
6.   Crontab –e
my crontab  looks like this:
*/30 * * * * cd /root && ./mnchecker --currency-handle="vivo" --currency-bin-cli="/root/vivo_new/src/vivo-cli" --currency-bin-daemon="/root/vivo_new/src /vivod" --currency-datadir="/root/.vivocore/" >/dev/null 2>&1
* * * * * cd /root/.vivocore/sentinel && ./venv/bin/python bin/sentinel.py 2>&1 >> sentinel-cron.log
7.   After Step 4 complete, start MN on (Windows) wallet.

Also facing some problems on cryptopia:
deposited 10 VIVO yesterday, but confirmations stopped at 17/20

Today's deposit of VIVO there went fine though.

Novaexchange will close 2018-03-31

Any future plans? Will there be an alternative exchange listing vivo?

ICO Site still down?

I cannot request a payout.

Can confirm. Version works fine, except for the long wait after a relaunch of program.
What's new for me: When claiming interest today it generated a new address for destination of payment.
I was a little bit surprised, when the green sign indicated a new address and my balance remained 0 for a moment.

Is swap day still the 15 october? I remenber once it was 31 but then changed because of monaize ico. But now monaize ico is about 30 days ahead.

Had the same status this morning:

restartet masternode and wallet

vivo-cli getinfo reports:
"Not capable masternode: Masternode not in masternode list"

Not now. Ok, will wait 
But in the past I had once only about 11 KMD balance in my wallet and could collect interest amounts of 0.0xxx.   

Thought it only had to be 10KMD or more in the wallet to get interest. For collecting interest, there is a limit, too?

I do not succeed in claiming interest through agama (v0.1.6.2e_beta) anymore.

Worked out fine following instructions like
https://steemit.com/wallet/@alberm/agama-wallet-komodo-kmd-interest

but since a few days interest is not added to balance.

Any changes?

Balance was below 10KMD. Now it's more than 10 KMD and interest is visible and counting.

Sent about 9 KMD to myself two days ago, but no change of "interest earned" visible on my Agama wallet (basilisk mode) 

waiting for an approval for a withdrawal now for more than 4 days.
Support ticket opened, but no response.

Today I tried some other withdrawals (small amounts first, then "bigger" ones), all completed quickly with email confirmation, no 2FA enabled yet.

Cleared my whole balances on that account.

now balance and transactions with both seeds.
Indeed, takes a little while.

Still no improvement on mac version.

The Windows Installation shows the transactions, but no balance (no "Interest Earned" for one seed, but for the other). The Mac Version doesn't show anything.
Cleared cache and fetched data many times 

Hi.

Just a newbie looking for help.
Trying to get Agama running.
Installed Agama on OS X. Already have a seed with a KMD Address. I just sent some KMD from my Bittrex Account to this KMD Address.
I can view the transaction on http://kmd.explorer.supernet.org/address
but Agama wallet in Basilisk mode does not show the balance or the transaction.

Any help?