 Show Posts
|
|
Pages: [1]
|
no idea to be honest i have 7 more miners with the same settings working without any problems
I had a problem with 2. Works fine now but expereienced this trouble for about 2-3 hours. did you do anything to fix it or it just worked ? |
|
|
|
Having a really strange problem , 4 of the miners suddenly stopped working and getting this error always no matter what server or setting ETH: Stratum - Cannot connect to eu1-etc.ethermine.org:14444 Tried all the servers , any idea ? Similar problem today. Could it be because of upcoming fork? no idea to be honest i have 7 more miners with the same settings working without any problems |
|
|
|
Having a really strange problem , 4 of the miners suddenly stopped working and getting this error always no matter what server or setting ETH: Stratum - Cannot connect to eu1-etc.ethermine.org:14444 Tried all the servers , any idea ? |
|
|
|
This is the error im getting after just enabling the ETC mine and its options /media/m1/1263-A96E/oneBash: line 876: ETCADDR: command not found
/home/m1/9.0/ethdcrminer64: /usr/local/cuda/lib64/libOpenCL.so.1: no version information available (required by /home/m1/9.0/ethdcrminer64)
����������������������������������������������������������������ͻ
� Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.0 �
����������������������������������������������������������������ͼ
This pool (eu1-etc.ethermine.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eu1-etc.ethermine.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eu1-etc.ethermine.org removed from the list and this is after addingg "-allpools 1" /media/m1/1263-A96E/oneBash: line 876: ETCADDR: command not found
/home/m1/9.0/ethdcrminer64: /usr/local/cuda/lib64/libOpenCL.so.1: no version information available (required by /home/m1/9.0/ethdcrminer64)
����������������������������������������������������������������ͻ
� Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.0 �
����������������������������������������������������������������ͼ
ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
AMD OpenCL platform not found
Driver 368.81 is recommended for best performance and compatibility
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
CUDA initializing...
NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 8.0/8.0
GPU #0: GeForce GTX 1060 6GB, 6071 MB available, 10 compute units, capability: 6.1
Total cards: 1
ETH: Stratum - connecting to 'eu1-etc.ethermine.org' <0.0.0.0> port 4444
ETH: Stratum - Connected (eu1-etc.ethermine.org:4444)
ETH: Share rejected!
ETH: Job timeout, disconnect, retry in 20 sec...
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333 Thanks in advance Sorry about that, I should have tested the ETC coin choices after I modified them; I had left a space in each ... Fail on my part. I have updated the newest oneBash link and it should work now. Just Updated it and tried and still there is another error /home/m1/9.0/ethdcrminer64: /usr/local/cuda/lib64/libOpenCL.so.1: no version information available (required by /home/m1/9.0/ethdcrminer64)
����������������������������������������������������������������ͻ
� Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.0 �
����������������������������������������������������������������ͼ
ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
AMD OpenCL platform not found
Driver 368.81 is recommended for best performance and compatibility
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
CUDA initializing...
NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 8.0/8.0
GPU #0: GeForce GTX 1060 6GB, 6071 MB available, 10 compute units, capability: 6.1
Total cards: 1
ETH: Stratum - connecting to 'eu1-etc.ethermine.org' <37.187.56.197> port 4444
ETH: Stratum - Connected (eu1-etc.ethermine.org:4444)
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
ETH: Authorized
Setting DAG epoch #128...
Reloading epools.txt
ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
ETH: Connection lost, retry in 20 sec...
Reloading epools.txt
ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
Reloading epools.txt
ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
Setting DAG epoch #128 for GPU #0
Create GPU buffer for GPU #0
GPU 0 DAG creation time - 8686 ms
Setting DAG epoch #128 for GPU #0 done
ETH: Stratum - connecting to 'eu1-etc.ethermine.org' <37.187.56.197> port 4444
ETH: Stratum - Connected (eu1-etc.ethermine.org:4444)
ETH: Authorized
ETH: Connection lost, retry in 20 sec...
GPU0 t=54C fan=34%
I just tested it with your pool: eu1-etc.ethermine.org:4444 worked for me this error: /home/m1/9.0/ethdcrminer64: /usr/local/cuda/lib64/libOpenCL.so.1: no version information available (required by /home/m1/9.0/ethdcrminer64) will always occur unless I change a link: it is irrelevant. I am guessing you added: -allpools 1 as an argument when calling Claymore this is likely the problem. It is not needed for ETC, and perhaps (if this is indeed what you changed) makes it not work. just did that and its WORKING , Finally Thanks a million for your patience and help, the time you put into this to make our life easier and our wallets heavier  im using asus dual gtx 1060 6gb any idea regarding what to put in the overclock part , i dont understand how it calculated or done to be honest |
|
|
|
This is the error im getting after just enabling the ETC mine and its options /media/m1/1263-A96E/oneBash: line 876: ETCADDR: command not found
/home/m1/9.0/ethdcrminer64: /usr/local/cuda/lib64/libOpenCL.so.1: no version information available (required by /home/m1/9.0/ethdcrminer64)
����������������������������������������������������������������ͻ
� Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.0 �
����������������������������������������������������������������ͼ
This pool (eu1-etc.ethermine.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eu1-etc.ethermine.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eu1-etc.ethermine.org removed from the list and this is after addingg "-allpools 1" /media/m1/1263-A96E/oneBash: line 876: ETCADDR: command not found
/home/m1/9.0/ethdcrminer64: /usr/local/cuda/lib64/libOpenCL.so.1: no version information available (required by /home/m1/9.0/ethdcrminer64)
����������������������������������������������������������������ͻ
� Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.0 �
����������������������������������������������������������������ͼ
ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
AMD OpenCL platform not found
Driver 368.81 is recommended for best performance and compatibility
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
CUDA initializing...
NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 8.0/8.0
GPU #0: GeForce GTX 1060 6GB, 6071 MB available, 10 compute units, capability: 6.1
Total cards: 1
ETH: Stratum - connecting to 'eu1-etc.ethermine.org' <0.0.0.0> port 4444
ETH: Stratum - Connected (eu1-etc.ethermine.org:4444)
ETH: Share rejected!
ETH: Job timeout, disconnect, retry in 20 sec...
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333 Thanks in advance Sorry about that, I should have tested the ETC coin choices after I modified them; I had left a space in each ... Fail on my part. I have updated the newest oneBash link and it should work now. Just Updated it and tried and still there is another error /home/m1/9.0/ethdcrminer64: /usr/local/cuda/lib64/libOpenCL.so.1: no version information available (required by /home/m1/9.0/ethdcrminer64)
����������������������������������������������������������������ͻ
� Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.0 �
����������������������������������������������������������������ͼ
ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
AMD OpenCL platform not found
Driver 368.81 is recommended for best performance and compatibility
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
CUDA initializing...
NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 8.0/8.0
GPU #0: GeForce GTX 1060 6GB, 6071 MB available, 10 compute units, capability: 6.1
Total cards: 1
ETH: Stratum - connecting to 'eu1-etc.ethermine.org' <37.187.56.197> port 4444
ETH: Stratum - Connected (eu1-etc.ethermine.org:4444)
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
ETH: Authorized
Setting DAG epoch #128...
Reloading epools.txt
ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
ETH: Connection lost, retry in 20 sec...
Reloading epools.txt
ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
Reloading epools.txt
ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
Setting DAG epoch #128 for GPU #0
Create GPU buffer for GPU #0
GPU 0 DAG creation time - 8686 ms
Setting DAG epoch #128 for GPU #0 done
ETH: Stratum - connecting to 'eu1-etc.ethermine.org' <37.187.56.197> port 4444
ETH: Stratum - Connected (eu1-etc.ethermine.org:4444)
ETH: Authorized
ETH: Connection lost, retry in 20 sec...
GPU0 t=54C fan=34%
|
|
|
|
I don't do the best job of tracking every coin, and I haven't mined Skein myself.
If it uses an algorithm supported by ccminer then you should be able to mine it with nvOC. It most likely has a specific fork which performs better. If you find me the link to the clients repo and tell me what pool you want to / do use to mine skein, then I can add the client and modify oneBash for the next version. In windows I use the alexis78 version from nemo's miner and I mine at Z-pool My batfile looks like this : ccminerAlexis78.exe -r 0 -a skein -o stratum+tcp://skein.mine.zpool.ca:4933 -u BTC ADDDRESS -p c=BTC Skein is paying really well atm...$23/1080ti/day that 1080ti beats a S9 any day @fullzero I haven't had time to play much with it yet, will report later. - I added DGB to onebash (ccminer -a skein). I don't know if the OC works (fan speed is not fixed even if defined), if need to launch instances, or if SPccminer is slow, I get a higher hashrate with this ccminer version for now ( https://github.com/tpruvot/ccminer). Could you add this miner or the fastest skein version (alexis maybe)? And the DGB coin option. You might want to look into skein for your Nv  - You might want to launch onebash inside a screen to monitor it remotely. ( https://www.gnu.org/software/screen/manual/screen.html) and a ssh server (disabled by default) - Maybe Enable automatic security updates - I got a module error trying to upgrade (kernel) - I will try to put it on SSD as upgrading is slow @bentcrypto Did you get the best results for skein with Alexis? Do you mine DGB directly with it? I updated the newest oneBash link on the OP. It now supports both ETHERMINEdotORG for ETC as well as ETH and I added a DGB coin selection. I used your pool / options bentcrypto: for a DGB address you are actually using a BTC address with zpool. peonv I tested both the SP and TP forks with DGB and I agree the TP is faster so it is what I set oneBash to use. I didn't enable updates as they will slow down mining, I have and plan to continute to update nvOC frequently. I download and install updates for each version. The last image I made already has: disabled password lockout thread number selection option for cpuminer-opt added screen and openssh-server I will add the alexis fork to the next version (which will be soon) In regards to using vanilla methods to update the system; they may not work due to changes I have made. nvOC is a full install, but has system files for all common chipsets. This is the error im getting after just enabling the ETC mine and its options /media/m1/1263-A96E/oneBash: line 876: ETCADDR: command not found
/home/m1/9.0/ethdcrminer64: /usr/local/cuda/lib64/libOpenCL.so.1: no version information available (required by /home/m1/9.0/ethdcrminer64)
����������������������������������������������������������������ͻ
� Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.0 �
����������������������������������������������������������������ͼ
This pool (eu1-etc.ethermine.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eu1-etc.ethermine.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eu1-etc.ethermine.org removed from the list and this is after addingg "-allpools 1" /media/m1/1263-A96E/oneBash: line 876: ETCADDR: command not found
/home/m1/9.0/ethdcrminer64: /usr/local/cuda/lib64/libOpenCL.so.1: no version information available (required by /home/m1/9.0/ethdcrminer64)
����������������������������������������������������������������ͻ
� Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.0 �
����������������������������������������������������������������ͼ
ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
AMD OpenCL platform not found
Driver 368.81 is recommended for best performance and compatibility
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
CUDA initializing...
NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 8.0/8.0
GPU #0: GeForce GTX 1060 6GB, 6071 MB available, 10 compute units, capability: 6.1
Total cards: 1
ETH: Stratum - connecting to 'eu1-etc.ethermine.org' <0.0.0.0> port 4444
ETH: Stratum - Connected (eu1-etc.ethermine.org:4444)
ETH: Share rejected!
ETH: Job timeout, disconnect, retry in 20 sec...
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333 Thanks in advance |
|
|
|
Any idea which image to use for Asrock 970 Extreme , im using it now with simplemining OS with AMD gpu's
but i just started to build an Nvidia Rig and i would like to test the cards first
1 - Which image is suitable ?
2 - Linux Newbie Question here but if its plug and play how i can add the pool and the Wallet id to the miner ?
Thanks in advance
Edit the onebash file with any text editor I'm using an Asrock z97 extreme 6 with the image for MSi z170 Thanks for the reply , after doing that i got it up and running but getting "Share Rejected" i didnt change anything on the bash file regarding the OC Is the pool server you are using geographically close to you? Yes im already using it with (simplemining OS) eu1-etc.ethermine.org:4444 and im not getting any Hash's at all as well ethermine uses a different syntax than other pools which is most likely your problem. I made a YES / NO switch in the newest oneBash to deal with this problem. On the OP at the top there is a link to the newest oneBash (on your rig you can open firefox and click the OP link) if you download, configure it with your info ensuring: ETHERMINEdotORG="YES" then replace the existing oneBash in the windows partition; you should be ale to mine with ethermine. Let me know if you have any questions. does the apply to ETC on ethermine as well ? What do you think is the most suitable image to use with Asrock 970 Extreme 4 / its an old mb Thanks alot for the effort and the time you have put into this |
|
|
|
Any idea which image to use for Asrock 970 Extreme , im using it now with simplemining OS with AMD gpu's
but i just started to build an Nvidia Rig and i would like to test the cards first
1 - Which image is suitable ?
2 - Linux Newbie Question here but if its plug and play how i can add the pool and the Wallet id to the miner ?
Thanks in advance
Edit the onebash file with any text editor I'm using an Asrock z97 extreme 6 with the image for MSi z170 Thanks for the reply , after doing that i got it up and running but getting "Share Rejected" i didnt change anything on the bash file regarding the OC Is the pool server you are using geographically close to you? Yes im already using it with (simplemining OS) eu1-etc.ethermine.org:4444 and im not getting any Hash's at all as well |
|
|
|
Any idea which image to use for Asrock 970 Extreme , im using it now with simplemining OS with AMD gpu's
but i just started to build an Nvidia Rig and i would like to test the cards first
1 - Which image is suitable ?
2 - Linux Newbie Question here but if its plug and play how i can add the pool and the Wallet id to the miner ?
Thanks in advance
Edit the onebash file with any text editor I'm using an Asrock z97 extreme 6 with the image for MSi z170 Thanks for the reply , after doing that i got it up and runing but getting "Share Rejected" i didnt change anything on the bash file regarding the OC |
|
|
|
|
Any idea which image to use for Asrock 970 Extreme , im using it now with simplemining OS with AMD gpu's
but i just started to build an Nvidia Rig and i would like to test the cards first
1 - Which image is suitable ?
2 - Linux Newbie Question here but if its plug and play how i can add the pool and the Wallet id to the miner ?
Thanks in advance
|
|
|
|
|
