 Show Posts
|
|
Pages: [1] 2 »
|
At my point of view, dual is not profitable, or the same as mono, except free socket. In my case mono mode takes apr. 800w for 6 cards RX480 and dual mode takes apr. 1050w.
you are mining the wrong dual than  do you have tried ZIL in "custom" dual? give a try and you'll see the positive results What do you mean by "custom"? For long time it's not profitable for me either. |
|
|
|
I've got 8 x rx580 on 2x750W PSU - 1.1kWh
6 x rx580 on 2x650W PSU - 0.9kWh
I've got GPu hangs everyday (also freeze windows) and read that PSU can fix it.
But is it possible with so much power left in PSUs?
If you GPU overclocked and there is no low voltage mod, I think your PSU overloaded. My overclocked 6x570 farms are running on 2x775W PSUs and it is now about PSU's limit I think. It happened cuz 750W on PSU label does not give you efficiency of 100%. Thank you for your reply. I should also mention that all of them are Platinum so highest efficiency possible. And usually in both is same card every time. If they are undervolted and clocked sensible, and you are not dual mining, your PSUs are not the problem. Is 1.1 and 0.9 what you measure at he wall? If you know what GPU it is that hangs, lower its memclock. Have you used Hwinfo to see if any GPUs generate a lot of hardware errors? A PSU can deliver its rated power and will pull more than that from the wall. You do not have to take the efficiency into account to find out what it can deliver. Running it close to 100% might not be a good idea tho. Yes, these reading are from wall. Changing voltage and mmclock doesn't help with this problem. Checked so many times. I've got 8 x rx580 on 2x750W PSU - 1.1kWh
6 x rx580 on 2x650W PSU - 0.9kWh
I've got GPu hangs everyday (also freeze windows) and read that PSU can fix it.
But is it possible with so much power left in PSUs?
Strange. I have 13x 570 (rig draws total 1550w) on 220v. Using 2x evga g2 1600w psu. What voltage are you using? How you moded it? You get ~30% lower power consumption, I would love to emulate this. |
|
|
|
I've got 8 x rx580 on 2x750W PSU - 1.1kWh
6 x rx580 on 2x650W PSU - 0.9kWh
I've got GPu hangs everyday (also freeze windows) and read that PSU can fix it.
But is it possible with so much power left in PSUs?
If you GPU overclocked and there is no low voltage mod, I think your PSU overloaded. My overclocked 6x570 farms are running on 2x775W PSUs and it is now about PSU's limit I think. It happened cuz 750W on PSU label does not give you efficiency of 100%. Thank you for your reply. I should also mention that all of them are Platinum so highest efficiency possible. And usually in both is same card every time. |
|
|
|
|
I've got 8 x rx580 on 2x750W PSU - 1.1kWh
6 x rx580 on 2x650W PSU - 0.9kWh
I've got GPu hangs everyday (also freeze windows) and read that PSU can fix it.
But is it possible with so much power left in PSUs?
|
|
|
|
|
Another few weeks passed and still no MN?
|
|
|
|
|
Any update on MN?
I think it could move coin significantly once MN are introduced.
I see coins without dev but with MN and many times market cap over CIF.
This coin has potential and I would like others to see it.
|
|
|
|
When we will se CIF on coinmarketcap?
Request has been put in - I'd tweet out to CMC and generate some awareness! Good! And thank you for being so active in here. I'm glad that I'm in with CIF. |
|
|
|
|
When we will se CIF on coinmarketcap?
|
|
|
|
This is great, this project has an airdrop as one of their campaign
A lot of airdrop participants are dumping their coins now they get the chance. These cheap cheap coins are gradually picked up by people who like the idea of setting up a masternode. I guess a masternode is not for everybody... Yeah I hope for MN info soon. |
|
|
|
|
Again over 10% stale shares...
Anyone?
|
|
|
|
Whats problem with mining pool?Its stopped at 76090 block, but current 76661
Same problem... I'm fixing right now , the findblock cronjobs got stuck that's why the blocks stop showing on the pool front end, in a few minutes you will start to see all the blocks and your balance will update https://pcoin.coin-miners.infoEDIT: Fixed, the blocks got updated on the frontend and the miners balance Looks solved, thanks! |
|
|
|
Whats problem with mining pool?Its stopped at 76090 block, but current 76661
Same problem... |
|
|
|
 1 board hashing much lower on 2.04, 1.12 everything is ok on the same settings. |
|
|
|
|
Anyone synchronized B2X wallet? 160GB of data and stopped at 99.76% dec 28...
|
|
|
|
Well, yobit.net is one of the very few supporting it and there it went down 72% in the last 24 hours.
Don't expect that we will hear much about that fork in the future.
You can exchange but can't deposit: "No free addresses for such currency. Please try again in 2 minutes." |
|
|
|
I found places where you can exchange but can't deposit... 2 exchanges same situation. |
|
|
|
Not normal, my chart looks same as before. Do you have temps ok? I have 2 D3s running on antpool. from yesterday I see this chart. is that normal? if not, is my d3s fault or pool's fault? under worker section my miners are working normal. https://s13.postimg.org/ixi37akav/chart.png |
|
|
|
Is there any exchange that you can deposit and sell? D3 owners, Do not despair, I am here to save you all. We have to unite!!!! I have found the ultimate coin currently making about $4.50 / hour per D3 so roughly ~$100 USD per day per D3 since 6am this morning. Our saviour coin is B2X !!! Don't say I do not contribute anything to this thread. Currently mining the living crap out of this coin with my 5 D3's! I expect D3 prices to rise in the near future. 3 hours of mining proof: https://imgur.com/a/6OwiyNo I don't care if people jump on this and profits tumble, I have another 3 x-11 coins in my pocket that are making more than the L3+ and S9. Good luck to all which pool ? Right here, check out my stats, up to 3.3 coins now, gogogogogogo http://miningpool.shop/?address=1DEdjA7Dk37KmDC4dPkNtEqiumGNSEkGJrusing Temporary telegram wallet for now, till they release official wallets is the pool stable? p.s how to set up the d3? what should i put here? Password: c=<SYMBOL>,d=96 There usually is a few hundred people mining here on a regular day, but now there is over 5k users on the x11 pool alone ! Its unstable as hell because everyone including their mom, dad, goldfish and dog are trying to mine. My settings: c=B2X,d=96,n=DashMiner1 |
|
|
|
 Just connected new D3 and... is it 1/3 dead? advanced settings. set it under 500M. Thanks for suggestion but doesn't help. it's not dead unless you get - - - - - instead of o o o o or x x x x did you plugged in everything correctly? Now it's only one x. I've checked connections few times. Changing frequency and rebooting doesn't help. |
|
|
|
|
