Show Posts
|
Pages: [1] 2 »
|
I still feel like it comes and goes, just like other commodities as of now. No matter how much I like BTC i feel it has lost its true value/comprehension over time. So without a good bandwargon urge it will be just another asset, just llike the others. Investing-wise, it's been a great median at the right moment.
|
|
|
@Xiphon I love our pool so much that I always comeback to mine here whenever I got a chance, the only reason I switched was that there was a few miner last weeks and we can't even hit a block. This is the latest stats before I moved back to our pool on 25th, I got roughly 11-13 at other pools. You can check the pic above, that's for 24-hr mining from 23-24th. The difficulty was even higher at the time. So ofc I would expected to get much more when the diff sunk so hard, turned out I got really bad luck? Is everything alright on our ends? Lastly, is it possible to check what time did I submit first share? I really want to time it precisely to make sure that I'm not rushing to conclusion. If I can know that so I can get a big picture of my average reward during these 4-5 days. ***regarding the PPLNS I've read it several times yet I have say that I don't completely understand it... But I'm assuming that way as I'm getting 0.22 for each block we found NOW. Which equals to the percentage of hashrate I'm accounting for (i'm the 2nd top miner) you can see for ur self. So I think that the 1st miner just came yesterday but seems to get the reward proportionately to his hashrate thus my shares has ended right?
|
|
|
We have a very bad luck on ETP idk whap happened to us lately lol By the next 12 hrs, it will be 96 hrs of mining here. I'm benching the performance using only 2 rigs (just switched back from other coins) So far I only got 33 ETP (including unconfimed blocks), which is only around 9 ETPs per day. from 345 Mh/s.. Based on the fact that the difficulty for last 3 days went as low as 5 million to 6 million I'm getting roughly 12.5-13 at other pools. Will my hashrate that were submitted during no-block time be compensated? I know PPLNS favors the loyal pool member, but every block I found now I only get 6% or roughly .22 ETP per block, that's equal to the percent that I'm accounting for (6% of 4.xx Gh) as the new guy with big hash came. So I'm assuming that the share I submitted during no-block days are excluded right?
|
|
|
What happened to the pool... I'm with the only other two miners! Where do you guys left? (The network hash seems to be increasing compare to the last week too)
|
|
|
ETH launch + couple of months they were doing 10-11MH oc'd, after that windows users started to have some performance issues but linux gave some overtime. I sold them when the dag size kept growing and they started to struggle in linux too so no idea what they can do today, pretty sure they can run cryptonight 250-350 h/s today.
That card is a mining legend, it was (and still is) profitable when amd's went negative. After 3,5 years street price is still 50% of the launch price, that's something no high end card can do.
That's pretty high and far beyond my expectation. It's certain that the performance would be pretty bad by now, but I don't really know how bad it is. Maybe I should bench them myself lel. But if they can do that much on low-dag Ethash coins, I would really want to get more of them to build a 6-gpu rig. And yes I've seen lots of people have performance issue, but I think that's the same case when I firstly mine with 970. They do better in linux and compatible driver version for windows.
|
|
|
anyone knows hashrate for Ethash? I might build a rig of these gpus for EXP/metaverse mining.
|
|
|
There's no easy money in cryptoworld The more you say its easy the less convincing it is (at least for me lel) Goodluck
|
|
|
I've tried to look for the answer on this forum and Google. Sadly I only found comments regarding its small Vram and growing dag of ETH. So I hope some people here have tried this card before! and I surely will appreciate your help!
My question is how much exactly 750ti can do on Ethash mining with smaller dag coins (EXP,Music, or ETP)
The reason is that now I'm mining ETP with my few 1060 rigs. I also have two of 750ti in-stock and I really want to make use of them as any extra hash will add up and is appreciated.
I heard that the gpu was one of the most efficient in terms of power consumption for its era? I don't mind using some spare hardward to build up a rig of these cards, I just only want to know how much they can perform
I expect 4-5 mhz for ethash? Will that be possible at their stock settings? Or is it impossible
Thanks!
|
|
|
Still looking for solution, haven gave up yet . . .
|
|
|
1. Have you swapped cards about? 2. Have you got Bios set to AUTO, not Gen1,2 etc?
are you referring to me? Hi. Yes. Sorry deleted the quote by mistake so bios should be set to auto? Unlike config for windows? Oh and I don't really understand about swapped cards about? What does that mean
|
|
|
1. Have you swapped cards about? 2. Have you got Bios set to AUTO, not Gen1,2 etc?
are you referring to me?
|
|
|
Anybody can help me with this new rig running Z97 Gaming 5 MSI, I can't get the 7th card running on Windows 10 (Exclamation Mark Code 12 issue) as posted in this topic: https://bitcointalk.org/index.php?topic=2276767.msg23309174#msg23309174Now I'm testing SMOS, as some users sharing same hardware with me can get the 7th card to work on this simple mining OS. However mine is still not working. I tried switch risers into different slots, they all seems to be working fine .... but no matter what I changed the card in 7th order won't work (there will be a card doesn't show up) Anything else I can do ?
|
|
|
You really should stick to just 6 cards, any more and you will run into stability issues. Compound that with the fact that for some reason you are running windows to mine with and you will end up with a rig you have to mess with every couple of days.
I agree. However for me stability for each rig is variable and to be tested. I have experience for a few rigs that run smoothly with 8 GPU but they are on Asus mobo (which known for stability!) MSI often gives me this kind of head ache, I will try to make this work and let's see how smooth it can run. And of course i prioritize stability, if it's not stable it sure is not worth the effort and time, in that case I would stay with 6 cards
|
|
|
does that stand for Simple Mining? What cards are you running right now? Are their performances as good as in Win10? My Mixed 3g/6g 1060 can run smoothly for 163 mh/s for Ethash. Thanks for sharing mate!
|
|
|
lol seems like I have lots of friends here . Maybe I too should give up on this 7th 1060...
|
|
|
I have set up a few rigs using a number of different boards but this Z97 Gaming 5 from MSI is a bit hassle for me.
So far I've managed to make 6 gpus running stably, the problem occurs when I put in the 7th 1060. There will be an exclamation mark on this gpu in "device manager," in detail it says "this device does not have enough free resources" or CODE 12
I tried several config, but still can't get this to work. Some of those settings include; 1.) Change PCI lane to GEN1/2, latency to 8/4/4 as usual. 2.) Disable all on-board option as possible, it didn't work even I disable on-board LAN. 3.) Tried different bios version as well 4.) This MOBO is a bit old, so even newest bios available doesn't have "ABOVE 4G" decoding.
I think I've seen some people posted their 7-gpu rig using this mobo? so there must be something wrong with my set up?
Big thanks! Now I'm trying some alternative mining OS like simple mining. Will see if that work or not...
|
|
|
It's now back to normal... tho I don't know how exactly I fixed it...
Here's what I did, in case somebody are facing same issue. 1.) Take 2-3 cards off, remove the riser. 2.) Plug all of them back (new order) so I switched the trouble one in new slot 3.) Reinstall driver 4.) Rollback to stock setting 5.) I'm now using 3.3b instead of 3.4 for the EWBF Miner.
Constant speed only 55-61c atm, will continue watching!
|
|
|
maybe the rig can't handle 6 gpu, the motherboard maybe, or the gpu is throttling? can you check if yes with the power consumption or the usage?
I'd like to assume it that way, but I think this sometimes happens randomly? If the rig can't handle gpu, it should happen to some other cards when I switching the riser or pci slot right? I will try that asap. What are possible causes for GPU throttling? probably the temp? Now every card is running below 60c. Also the last time this happened to my old rig the cards were all same and brand new, the overclocking was also the same as well as all the stat reported same temperature, only that a single gpu didn't fully perform I reinstalled the driver, seems like it is not fixed.
|
|
|
I think I've noticed a significant drop in 1 gpu hashrate during mining. This is the 2nd time I notice this happening, looking forward to understand the real cause and solution if possible.
This rig is currently now 6-gpu rig, it was 5 before, every of them run smoothly and after I inserted an additional GTX 970 yesterday the result was satisfactory at first! Around 270 sols/s for 970 using EFWB Zec miner.
After a restart the hashrate of this card strangely drop to 220 and never goes up again. I can't figure this out? Have anyone experienced this before and what is your solution?
PS. This also happened with my old rig of 4 gpus (different set of cards) however I didn't fix it as I think it might be a glitch, but this time I think I'll need to get it fixed, otherwise the performance per watt will be real bad for 970 that draws huge amount of power.
Thanks
|
|
|
|