Show Posts
|
Pages: [1] 2 3 »
|
Took a good dump....goodbye SIGT hello STAK
|
|
|
My Sig wallet is out of Sync...any ideas team on how to resync the old wallet?
|
|
|
lux spmod 1 leaked
Where? Hook me up!
|
|
|
It's dead/closed, but you would of received warnings re closurer via email, u have no chance of retrieving your coins
|
|
|
I was able to upload my order history on Bittrex and upon pressing start I received an error: Run-time error '9': Subscript out of range While r_next If Worksheets(sheetTHId).Cells(r, 1).Value <> "" Then >If Split(Worksheets(sheetTHId).Cells(r, 3).Value, "-")(0) = basemarket Then hmm hard to pin point what went wrong here. if you dont mind me seeing your data you can send it do me and i will see what i can do for you. otherwise i can offer skype / teamviewer. just pmme ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) I admire your generosity, doing this for free... Thank you.
my pleasure! the more people profit from it the better! greetings Hi ! Have you been able to fix this issue ? I have the same problem when I click start after selecting the BIttrex CSV file Thanks Hi, I also have the same issue 'Run-time error '9': Subscript out of range' Looks really promising! Anyupdate peeps?
|
|
|
I was able to upload my order history on Bittrex and upon pressing start I received an error: Run-time error '9': Subscript out of range While r_next If Worksheets(sheetTHId).Cells(r, 1).Value <> "" Then >If Split(Worksheets(sheetTHId).Cells(r, 3).Value, "-")(0) = basemarket Then hmm hard to pin point what went wrong here. if you dont mind me seeing your data you can send it do me and i will see what i can do for you. otherwise i can offer skype / teamviewer. just pmme ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) I admire your generosity, doing this for free... Thank you.
my pleasure! the more people profit from it the better! greetings Hi ! Have you been able to fix this issue ? I have the same problem when I click start after selecting the BIttrex CSV file Thanks Hi, I also have the same issue 'Run-time error '9': Subscript out of range' Looks really promising!
|
|
|
Thankyou, no virus ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) , faster for me on my Asus/Gigabytes 1060 6gb 19.5mh vs 18.5(SP3 or 5) @ 70 pl, +150c, -500m 248kh/w
|
|
|
the whale is manipulate price, drop to 2500 satoshi then back to 4000 in just 30 miniutes
Yep I jumped on that whale riders back....almost drowned...lol
|
|
|
Ok Im chewing SIGT via Suprnova @ 17-18mh per card via my 1060 6gb's, PL 60/+150GPU/No OC on Mem/60% fan...68w per card or about 650w for each 8 card rig
Im confused with the SP3/4/5 options...how do I know what CUDA version Im cooking with? 0.05 BTC donate is a shitload to get wrong
|
|
|
I have the AR version x2, 8 GPU's each using 1 of the M2 slots with a PCIE m2 adaptor, rock solid
|
|
|
Wouldnt touch non legit revisions
|
|
|
What are the hash rates for the GTX 1060 for SIG/skunkhash? Looking to start up some miners on this but need to know so I can estimate the rewards.
Currently runs at 18mh/s @ 70 TDP 64C 6GB Version, 3GB runs @ 16mh/s. 18? damm thats good Im squeezing 13.5mh from my 1060's, what OC settings and intensity? share the love bruv!
|
|
|
i want to try mining, but my antivirus and antimalware allways block https://pasl.fairpool.xyz/, dont know why. why no one mining at suprnova, is it any trouble at suprnova ? or it is closed for miner ? Suprnova replied to me that the pool is closed for good. that sucks, so what pool options are there? just the 1 fairpool?
|
|
|
I have a Sapphire Radeon RX 470 MINING Edition 8192MB GDDR5 Samsung PCI-Express Graphics Card, and I am the following settings for simplemining -epool eth-eu1.nanopool.org:9999 -ewal obfuscated.test1/obfuscated@gmail.com -epsw x -dcoin pasc -dpool pasc-eu1.nanopool.org:15555 -dwal obfuscated.test1/obfuscated@gmail.com -dpsw x on claymore-eth-v9.7It is reporting the following speeds 15.37 MH/s 461.22 MH/sDoes this seem a reasonable speed for this single card? I have never dual mined nor used this card before so I am unsure on what type of hash speeds I should be getting. Thanks. Use the flag below(Taken from the claymore 9.xxx readme txt file), this balances out how much hashing power you want between your main and secondary coins -dcri Decred/Siacoin/Lbry/Pascal intensity, or Ethereum fine-tuning value in ETH-only ASM mode. Default value is 30, you can adjust this value to get the best Decred/Siacoin/Lbry mining speed without reducing Ethereum mining speed. You can also specify values for every card, for example "-dcri 30,100,50". You can change the intensity in runtime with "+" and "-" keys and check current statistics with "s" key. For example, by default (-dcri 30) 390 card shows 29MH/s for Ethereum and 440MH/s for Decred. Setting -dcri 70 causes 24MH/s for Ethereum and 850MH/s for Decred. for me I find -dcri 40 seems a good balance, but tweak and tune to taste Hi toomeke, thanks for the reply, could you give me some further help with your comment, I have tried setting "-dcri 30", -dcri 50" and -dcri 100" non of which make a difference below is an example of the change I made -epool eth-eu1.nanopool.org:9999 -ewal obfuscated.test1/obfuscated@gmail.com -epsw x -dcoin pasc -dpool pasc-eu1.nanopool.org:15555 -dwal obfuscated.test1/obfuscated@gmail.com -dpsw x To -epool eth-eu1.nanopool.org:9999 -ewal obfuscated.test1/obfuscated@gmail.com -dcri 30 x -dcoin pasc -dpool pasc-eu1.nanopool.org:15555 -dcri 30 obfuscated.test1/obfuscated@gmail.com -dpsw x Which does not seem to change anything. dcri- flag only needed once, it doesnt matter where you add the flag, but I like to keep the tweaks on the end like this -epool eth-eu1.nanopool.org:9999 -ewal obfuscated.test1/obfuscated@gmail.com -epsw x -dcoin pasc -dpool pasc-eu1.nanopool.org:15555 -dwal obfuscated.test1/obfuscated@gmail.com -dpsw x -dcri 30 Hi, thanks, I have tried the following values 09 23.24 MH/s 209.19 MH/s 10 23.32 MH/s 233.19 MH/s 20 20.27 MH/s 405.44 MH/s 30 14.97 MH/s 449.16 MH/s 40 12.35 MH/s 494.13 MH/s 50 10.28 MH/s 513.87 MH/s So I need to find out the best ratio of what to mine giving the current values of eth and pascal, as well as overclocking values. How do I find the default memory MHz and core MHz for my card? Sweet, have a play and workout the best ROI(Use this and input the rates and power https://whattomine.com/merged_coins/10-eth-pasc), default clock? just input core and memory as zero/0 then let it run for a min, and you will see then tune from there, Id tune mining ether only, then add your 2nd coin and finetune off that using dcri/extra clocks etc Get it stable but dont bother trying to get that last 5% more hash as it will often waste your mining and personal time...lol
|
|
|
Random question. I am wanting to mine Chaincoin with my Zcash rig. Can i put in the pool info and config and use my simplemining software to mine a coin outside of Zcash, Eth, Dcr, SC and so on?
Nope, use the Klaus T version from here http://ccminer.org/Ive rocked over to Chaincoin just in the last few hours, 9mh per 1060, GPU oc supported, doesnt use memory OC
|
|
|
Im in the groove team! lets do this!, Im doing it GPU style!
to $100 here we come!
Are you GPU mining? If so what cards and what are your hashrates? Gtx 1060's 9mh each
|
|
|
Im in the groove team! lets do this!, Im doing it GPU style!
to $100 here we come!
|
|
|
|