Is there any exchange yet for SPN?

Hashrate as advertised. No problems thank you!

Hashrate was as advertised, no problems. Thank you

Solid!  Hashrate was always as advertised or above never went down!

I was wondering if anyone can give me a pointer.  I have 4 gpus and 2 gridseeds.  I run 2 seperate instances of cgminer for them one for gpus and obviously one for the gridseeds.  I got annoyed about this so I decided to compile cgminer with gridseed and gpu support.  If I run my compiled cgminer without the gridseeds, everything is fine the gpus mine perfectly, or vice versa the gridseeds mine fine on it.  However when I try to have all devices mine through it.  The GPUS get tons of HW errors and the gridseeds mine fine.  I put the same clock settings and everything as I normally would.  Somehow cgminer doesnt like having them all together.  Is there something I need to put in my conf file or is it simply not possible to run the gridseeds and gpus under one instance of cgminer.  Any help is appreciated.

OMG Thank you Im such an idiot. I thought I had all dependencies installed.  I thought I had ncurses installed.  That fixed it. Thanks for the help. 

This part??

Configuration Options Summary:

  libcurl(GBT+getwork).: Enabled: -lcurl
  curses.TUI...........: NOT FOUND. TUI support DISABLED
  scrypt...............: Disabled
  OpenCL...............: Detection overrided. GPU mining support DISABLED
configure: error: No mining configured in

I am using Ubuntu 12.04 with my gridseeds. I compiled cgminer-gc3355 and is mining fine, however anytime I have compiled cgminer whether it be for btc-asics or gpu mining it runs like it's in compact mode, meaning I cant get the nice display to do pool management things like that. All I get is :


 [2014-03-13 19:31:36] Network diff set to 25
 [2014-03-13 19:31:36] Stratum from pool 0 detected new block                   
 [2014-03-13 19:31:40] Network diff set to 25
 [2014-03-13 19:31:40] Stratum from pool 0 detected new block                   
(5s):723.4K (avg):720.5Kh/s | A:544  R:32  HW:4  WU:5.8/m


Am I compiling it wrong or do I need a switch in my command?   When I use a precompiled version of cgminer it displays normally.  Does anyone have a precompiled  cgminer-gc3355 for Ubuntu 12.04 that they care to share?    Thank you

Your rig is offline  Please help.  

UPDATE: It came back online after a little more than an hour.  Any chance you extend the lease ?

UPDATE 2: THANK YOU FOR THE EXTENSION. MUCH APPRECIATED

Hashing speed as advertised. Thank you

First try at leaserig.net   rented for an hour, hashrate on the pool shows as advertised.

Did show dead a few times but I think that's cause Im using multipool and when it switches coins sometimes it thinks the pool is dead for a brief moment even on my own rig it happens. So thanks azoff

Seriously?? Went to PPS?   Im out.  Thanks for ruining the pool and taking luck away from the miners!!! Was a great pool till you switched it.  Im done mining on your pool as long as it stays PPS

Your FTC pool is pretty lonely. Im throwing a little bit of my almost nonexistant hash at it lol. 

Im having the same issue, I found about 18 blocks with no one else mining on the SBC pool and never got paid even after all were confirmed. Please assist.  Thank you


130,944   Confirmed!   synapses11   2013-08-19 04:05:45 PM   19
130,943   Confirmed!   synapses11   2013-08-19 04:05:19 PM   644
130,920   Confirmed!   synapses11   2013-08-19 03:07:20 PM   11
130,919   Confirmed!   synapses11   2013-08-19 03:06:56 PM   615
130,913   Confirmed!   synapses11   2013-08-19 02:58:26 PM   166
130,911   Confirmed!   synapses11   2013-08-19 02:54:29 PM   10
130,910   Confirmed!   synapses11   2013-08-19 02:54:07 PM   723
130,907   Confirmed!   synapses11   2013-08-19 02:36:45 PM   145
130,905   Confirmed!   synapses11   2013-08-19 02:33:40 PM   197
130,903   Confirmed!   synapses11   2013-08-19 02:28:41 PM   158
130,901   Confirmed!   synapses11   2013-08-19 02:26:58 PM   95
130,899   Confirmed!   synapses11   2013-08-19 02:23:53 PM   21
130,896   Confirmed!   unknown   2013-08-19 02:22:06 PM   84
130,895   Confirmed!   unknown   2013-08-19 02:21:53 PM   9
130,894   Confirmed!   synapses11   2013-08-19 02:21:09 PM   84
130,893   Confirmed!   synapses11   2013-08-19 02:20:12 PM   32
130,890   Confirmed!   unknown   2013-08-19 02:19:03 PM   299
130,885   Confirmed!   synapses11   2013-08-19 02:14:28 PM   1,210

Very nice! Just wish I wasnt having colossal problems keeping my rig going. I need to reinstall Ubuntu on it.  Good job guys.

General mining question I have yet to figure out after about a year of mining.  Is there really any difference in using 1 gpu thread or 2?  My average hashrate turns out the same using 1 or 2 threads, but is there any edge with using one or multiple threads per gpu?

Hopefully I find one soon. Been forever since the last one lol.  Good work on the pool. Been mining it since before the first block is found and is amazingly stable   Also guys give dcwsco some positive feedback under his trust feedback reputation or whatever it's called on here if you have had a good experience like have.

I had the same issue. I even tried sending some mnc when it was stuck trying to sync all day long. it still sent out the coins. But all is better now.

Im really hoping physical bitcoins come back again. I really want one and missed the boat on the first guy that did it.

1HjhUU5LujkcvGMxpT7Stn9NzhY7VtPxmJ