This is an attempt to provide as much information about the situation that I can to successfully resolve the issues and get to mining bitcoin.
![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
I am desperately attempting to get away from Windows (my comfort zone) and use linux for this endeavor. I am by no means knowledgeable in Linux. So far, I have spent about 20 hours trying to search online for solutions to this issue. I think I am getting close to figuring out the issue but I am also running out of ideas to try. I hope that by providing all the below information will give someone enough information to tell me what I am missing.
Not mentioned in this very long support thread is that I tried the new AMD 13.1 drivers (on a clean Xubuntu installation) and I tried the 13 beta drivers as well. When I used these drivers, I could not mine at all on either card. The error that I received was that there were no openCL gpu's available. Below, includes partial successes.
For the full set of the information, I created a .pdf - with logs, screenshots, the kitchen sink. It's a google doc with commenting turned on.
https://docs.google.com/file/d/0B9MiAgGtDs3BTHdib3ozaFBaa2s/edit?usp=sharingBlarg, this is my first post... I realize the newbie section is probably not where this belongs and I hope someone will find it and give a girl some help.
![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
Thanks
Shannon
Looking for Help with Multiple Graphics Card Setup in Xubuntu 12.10 for Bitcoin Mining
This is an attempt to provide as much information about the situation that I can to successfully resolve the issues and get to mining bitcoin.
![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
I am desperately attempting to get away from Windows (my comfort zone) and use linux for this endeavour. I am by no means knowledgeable in Linux. So far, I have spent about 20 hours trying to search online for solutions to this issue. I think I am getting close to figuring out the issue but I am also running out of ideas to try. I hope that by providing all the below information will give someone enough information to tell me what I am missing.
Not mentioned in this very long support thread is that I tried the new AMD 13.1 drivers (on a clean Xubuntu installation) and I tried the 13 beta drivers as well. When I used these drivers, I could not mine at all on either card. The error that I received was that there were no openCL gpu's available. Below, includes partial successes.
System InformationDistributor ID: Ubuntu
Description: Ubuntu 12.10
Release: 12.10
Codename: quantal
Xcfe Version 4.10, distro Xubuntu
MSI 970A-G46 9 Series AM3+ Motherboard
PNY 4096MB PC10666 DDR3 1333MHz x 2
EVGA 120-PB-0750-KR Super NOVA Power Supply
Seagate Hard Drive (SATA)
ASUSŪ 8x External Slim DVD+/-RW Drive
VisionTek Radeon HD 6950 1GB GDDR5 PCIe
HIS Radeon HD 7950 IceQ X2 Boost Clock 3GB PCI-E w/ DVI, HDMI, Dual DP
To verify that the second pcie slot was working properly, I ran sudo lshw|less. This is the results:
(I apologize upfront... I am not sure how much of this is relevant to troubleshooting and I'd rather give too much than not enough.)
Hardware Information via Xubuntu *-pci:0
description: PCI bridge
product: RD890 PCI to PCI bridge (PCI express gpp port B)
vendor: Advanced Micro Devices [AMD] nee ATI
physical id: 2
bus info: pci@0000:00:02.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:52 ioport:e000(size=4096) memory:fea00000-feafffff ioport:d0000000(size=268435456)
*-display
description: VGA compatible controller
product: Tahiti PRO [Radeon HD 7950]
vendor: Advanced Micro Devices [AMD] nee ATI
physical id: 0
bus info: pci@0000:01:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=fglrx_pci latency=0
resources: irq:82 memory:d0000000-dfffffff memory:fea00000-fea3ffff ioport:e000(size=256) memory:fea40000-fea5ffff
*-multimedia
description: Audio device
product: Tahiti XT HDMI Audio [Radeon HD 7970 Series]
vendor: Advanced Micro Devices [AMD] nee ATI
physical id: 0.1
bus info: pci@0000:01:00.1
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:79 memory:fea60000-fea63fff
*-pci:1
description: PCI bridge
product: RD890 PCI to PCI bridge (PCI express gpp port C)
vendor: Advanced Micro Devices [AMD] nee ATI
physical id: 3
bus info: pci@0000:00:03.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:52 ioport:d000(size=4096) memory:fe900000-fe9fffff ioport:c0000000(size=268435456)
*-display
description: VGA compatible controller
product: Cayman PRO [Radeon HD 6950]
vendor: Advanced Micro Devices [AMD] nee ATI
physical id: 0
bus info: pci@0000:02:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=fglrx_pci latency=0
resources: irq:81 memory:c0000000-cfffffff memory:fe920000-fe93ffff ioport:d000(size=256) memory:fe900000-fe91ffff
*-multimedia
description: Audio device
product: Cayman/Antilles HDMI Audio [Radeon HD 6900 Series]
vendor: Advanced Micro Devices [AMD] nee ATI
physical id: 0.1
bus info: pci@0000:02:00.1
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:80 memory:fe940000-fe943fff
*-pci:2
description: PCI bridge
product: RD890 PCI to PCI bridge (PCI express gpp port D)
vendor: Advanced Micro Devices [AMD] nee ATI
physical id: 4
bus info: pci@0000:00:04.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:52 memory:fe800000-fe8fffff
Installation ProcessTo date, I have reinstalled Xubuntu entirely erasing the previous version over ten times now with varying setups to try to get cgminer / bitminter to recognize both cards using OpenCL. Also, I tried Fedora and Mint Linux w/ Cinnamon and had varying success / failures.
The one constant variable through out all of the installations is that I could get either card to work successfully using bitminter with their appropriate hash rate. I just could not get both the 7950 AND the 6950 to work at the same time.
For the original installation process, I started with a guide that I found online titled, Complete Guide To Mine Bitcoin on Xubuntu 12.04.
Since one of the cards is a 7xxx series card, I used the driver instructions for the 7xxx series.
These instructions gave me 1 working video card for mining. Note: It didn't matter if put the 6950 in the first pcie slot on the motherboard or the 7950 - this setup would find each of them, give me the correct information about the card, and allow me to hash in bitminter. However, bitminter would only find 1 gpu using openCL at a time.
In the beginning of this process, I used sudo amdcccle to open the Catalyst Control Panel, it would only display 1 video card. Again, depending on what was in the first pcie slot would determine, which that would display.
Then, I checked the xorg.conf file located in /etc/X11. Originally, in this file, it only displayed one "device" section, which referred to the first pcie slot. However, I tried a couple times to add the second screen, monitor and device with no success (wouldn't even boot into xfce) - command line.
This is when I installed Mint Linux w/ Cinnamon. I followed the directions for installing the drivers in the above bitcoin guide and Mint Linux actually worked as a dual monitor setup - displaying information on both screens. HOWEVER, it also displayed this information repeatedly on 3 virtual desktops.
Again, I could mine using bitminter on ONE gpu - not both.
Here's the xorg.conf file: Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
Screen "aticonfig-Screen[1]-0" RightOf "aticonfig-Screen[0]-0"
EndSection
Section "Module"
EndSection
Section "ServerFlags"
Option "Xinerama" "on"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[1]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[1]-0"
Driver "fglrx"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[1]-0"
Device "aticonfig-Device[1]-0"
Monitor "aticonfig-Monitor[1]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
After looking at this xorg.conf file, it seemed to have the correct information that I was trying to put into the one on Xubuntu. I copied this file. I reinstalled Xubuntu (erasing previous version), installed the updates, followed the bitcoin setup guide above and then added this modified xorg.conf file to the /etc/X11 folder. Rebooted. Also, during reboot, there were video errors that scrolled too fast to read the exact info. So, again partial success / failure.
Here's the Xorg Log:[ 12.652]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 12.652] X Protocol Version 11, Revision 0
[ 12.652] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[ 12.652] Current Operating System: Linux uber 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 x86_64
[ 12.652] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=10985092-6bf0-4423-9176-98df1bfadf52 ro quiet splash
[ 12.652] Build Date: 11 April 2013 12:53:36PM
[ 12.652] xorg-server 2:1.13.0-0ubuntu6.2 (For technical support please see http://www.ubuntu.com/support)
[ 12.652] Current version of pixman: 0.26.0
[ 12.652] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12.652] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12.652] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 22 10:54:55 2013
[ 12.652] (==) Using config file: "/etc/X11/xorg.conf"
[ 12.652] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 12.653] (==) ServerLayout "aticonfig Layout"
[ 12.653] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 12.653] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 12.653] (**) | |-->Device "aticonfig-Device[0]-0"
[ 12.653] (**) |-->Screen "aticonfig-Screen[1]-0" (1)
[ 12.653] (**) | |-->Monitor "aticonfig-Monitor[1]-0"
[ 12.653] (**) | |-->Device "aticonfig-Device[1]-0"
[ 12.653] (**) Option "Xinerama" "on"
[ 12.653] (==) Automatically adding devices
[ 12.653] (==) Automatically enabling devices
[ 12.653] (==) Automatically adding GPU devices
[ 12.653] (**) Xinerama: enabled
[ 12.653] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 12.653] Entry deleted from font path.
[ 12.653] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 12.653] Entry deleted from font path.
[ 12.653] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 12.653] Entry deleted from font path.
[ 12.653] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 12.653] Entry deleted from font path.
[ 12.653] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 12.653] Entry deleted from font path.
[ 12.653] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 12.653] Entry deleted from font path.
[ 12.653] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 12.653] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 12.653] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 12.653] (II) Loader magic: 0x7ffd2abb5c40
[ 12.653] (II) Module ABI versions:
[ 12.653] X.Org ANSI C Emulation: 0.4
[ 12.653] X.Org Video Driver: 13.0
[ 12.653] X.Org XInput driver : 18.0
[ 12.653] X.Org Server Extension : 7.0
[ 12.655] (--) PCI:*(0:1:0:0) 1002:679a:1787:201c rev 0, Mem @ 0xd0000000/268435456, 0xfea00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 12.655] (--) PCI: (0:2:0:0) 1002:6719:1545:6950 rev 0, Mem @ 0xc0000000/268435456, 0xfe920000/131072, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
Removed Part of the log - limit of forum - full version in pdf
[ 12.655] (II) LoadModule: "glx"
[ 12.655] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/extensions/libglx.so
[ 12.655] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 12.656] compiled for 6.9.0, module version = 1.0.0
[ 12.656] Loading extension GLX
[ 12.656] (II) LoadModule: "fglrx"
[ 12.672] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/drivers/fglrx_drv.so
[ 12.684] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 12.684] compiled for 1.4.99.906, module version = 9.0.2
[ 12.685] Module class: X.Org Video Driver
[ 12.685] (II) Loading sub module "fglrxdrm"
[ 12.685] (II) LoadModule: "fglrxdrm"
[ 12.685] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so
[ 12.685] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 12.685] compiled for 1.4.99.906, module version = 9.0.2
[ 12.685] (II) AMD Proprietary Linux Driver Version Identifier:9.00.2
[ 12.685] (II) AMD Proprietary Linux Driver Release Identifier: 9.00.11
[ 12.685] (II) AMD Proprietary Linux Driver Build Date: Sep 20 2012 11:56:16
[ 12.685] (++) using VT number 7
[ 12.686] (WW) Falling back to old probe method for fglrx
[ 12.689] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 12.701] ukiDynamicMajor: found major device number 250
[ 12.701] ukiDynamicMajor: found major device number 250
[ 12.701] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 12.701] ukiOpenDevice: node name is /dev/ati/card0
[ 12.701] ukiOpenDevice: open result is 10, (OK)
[ 13.046] ukiOpenByBusid: ukiOpenMinor returns 10
[ 13.046] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 13.046] ukiOpenDevice: node name is /dev/ati/card1
[ 13.086] ukiOpenDevice: open result is 10, (OK)
[ 13.086] ukiOpenByBusid: ukiOpenMinor returns 10
[ 13.086] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 13.086] ukiDynamicMajor: found major device number 250
[ 13.086] ukiDynamicMajor: found major device number 250
[ 13.086] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 13.086] ukiOpenDevice: node name is /dev/ati/card0
[ 13.086] ukiOpenDevice: open result is 10, (OK)
[ 13.086] ukiOpenByBusid: ukiOpenMinor returns 10
[ 13.086] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 13.087] (--) Chipset Supported AMD Graphics Processor (0x679A) found
[ 13.087] (--) Chipset Supported AMD Graphics Processor (0x6719) found
[ 13.087] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:0:0) found
[ 13.087] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:0:2) found
[ 13.087] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:2:0) found
[ 13.087] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:3:0) found
[ 13.087] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:4:0) found
[ 13.087] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 13.087] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 13.087] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 13.087] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 13.087] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 13.087] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 13.087] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[ 13.087] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 13.087] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 13.087] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 13.087] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 13.087] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:0) found
[ 13.087] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
[ 13.087] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
[ 13.087] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 13.087] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
[ 13.088] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 13.088] (II) AMD Video driver is signed
[ 13.088] (II) fglrx(0): pEnt->device->identifier=0x7ffd2b5994f0
[ 13.088] (II) fglrx(1): pEnt->device->identifier=0x7ffd2b599800
[ 13.088] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === begin
[ 13.088] (II) Loading sub module "vgahw"
[ 13.088] (II) LoadModule: "vgahw"
[ 13.110] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 13.110] (II) Module vgahw: vendor="X.Org Foundation"
[ 13.110] compiled for 1.13.0, module version = 0.1.0
[ 13.110] ABI class: X.Org Video Driver, version 13.0
[ 13.110] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 13.110] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 13.110] (==) fglrx(0): Default visual is TrueColor
[ 13.110] (**) fglrx(0): Option "DPMS" "true"
[ 13.110] (==) fglrx(0): RGB weight 888
[ 13.110] (II) fglrx(0): Using 8 bits per RGB
[ 13.110] (==) fglrx(0): Buffer Tiling is ON
[ 13.110] (II) Loading sub module "fglrxdrm"
[ 13.110] (II) LoadModule: "fglrxdrm"
[ 13.110] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so
[ 13.110] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 13.110] compiled for 1.4.99.906, module version = 9.0.2
[ 13.121] ukiDynamicMajor: found major device number 250
[ 13.121] ukiDynamicMajor: found major device number 250
[ 13.121] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 13.121] ukiOpenDevice: node name is /dev/ati/card0
[ 13.121] ukiOpenDevice: open result is 14, (OK)
[ 13.121] ukiOpenByBusid: ukiOpenMinor returns 14
[ 13.121] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 13.121] ukiOpenDevice: node name is /dev/ati/card1
[ 13.121] ukiOpenDevice: open result is 14, (OK)
[ 13.121] ukiOpenByBusid: ukiOpenMinor returns 14
[ 13.121] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 13.121] (**) fglrx(0): NoAccel = NO
[ 13.121] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 13.121] (--) fglrx(0): Chipset: "AMD Radeon HD 7900 Series " (Chipset = 0x679a)
[ 13.121] (--) fglrx(0): (PciSubVendor = 0x1787, PciSubDevice = 0x201c)
[ 13.121] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 13.121] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 13.121] (--) fglrx(0): MMIO registers at 0xfea00000
[ 13.121] (--) fglrx(0): I/O port at 0x0000e000
[ 13.121] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 13.122] (II) fglrx(0): AC Adapter is used
[ 13.122] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 13.212] (II) Loading sub module "vbe"
[ 13.212] (II) LoadModule: "vbe"
[ 13.212] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 13.212] (II) Module vbe: vendor="X.Org Foundation"
[ 13.212] compiled for 1.13.0, module version = 1.1.0
[ 13.212] ABI class: X.Org Video Driver, version 13.0
[ 13.212] (II) fglrx(0): VESA BIOS detected
[ 13.212] (II) fglrx(0): VESA VBE Version 3.0
[ 13.212] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 13.212] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 13.212] (II) fglrx(0): VESA VBE OEM Software Rev: 15.30
[ 13.212] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 13.212] (II) fglrx(0): VESA VBE OEM Product: TAHITI
[ 13.212] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 13.212] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 13.212] (--) fglrx(0): Video RAM: 3145728 kByte, Type: GDDR5
[ 13.212] (II) fglrx(0): PCIE card detected
[ 13.213] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 13.213] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 13.213] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0xc0000000)
[ 13.213] (II) fglrx(0): RandR 1.2 support is enabled!
[ 13.213] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 13.213] (==) fglrx(0): Center Mode is disabled
[ 13.213] (II) Loading sub module "fb"
[ 13.213] (II) LoadModule: "fb"
[ 13.213] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 13.213] (II) Module fb: vendor="X.Org Foundation"
[ 13.213] compiled for 1.13.0, module version = 1.0.0
[ 13.213] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.213] (II) Loading sub module "ddc"
[ 13.213] (II) LoadModule: "ddc"
[ 13.213] (II) Module "ddc" already built-in
[ 13.298] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 13.298] (II) fglrx(0): Output DFP2 has no monitor section
[ 13.298] (II) fglrx(0): Output DFP3 has no monitor section
[ 13.298] (II) fglrx(0): Output DFP4 has no monitor section
[ 13.298] (II) fglrx(0): Output DFP5 has no monitor section
[ 13.298] (II) fglrx(0): Output DFP6 has no monitor section
[ 13.298] (II) fglrx(0): Output DFP7 has no monitor section
[ 13.298] (II) fglrx(0): Output DFP8 has no monitor section
[ 13.298] (II) fglrx(0): Output DFP9 has no monitor section
[ 13.298] (II) fglrx(0): Output DFP10 has no monitor section
[ 13.298] (II) fglrx(0): Output CRT1 has no monitor section
[ 13.298] (II) Loading sub module "ddc"
[ 13.298] (II) LoadModule: "ddc"
[ 13.298] (II) Module "ddc" already built-in
[ 13.298] (II) fglrx(0): Connected Display0: CRT1
[ 13.298] (II) fglrx(0): Display0: Failed to get EDID information.
[ 13.299] (II) fglrx(0): EDID for output DFP1
[ 13.299] (II) fglrx(0): EDID for output DFP2
[ 13.299] (II) fglrx(0): EDID for output DFP3
[ 13.299] (II) fglrx(0): EDID for output DFP4
[ 13.299] (II) fglrx(0): EDID for output DFP5
[ 13.299] (II) fglrx(0): EDID for output DFP6
[ 13.299] (II) fglrx(0): EDID for output DFP7
[ 13.299] (II) fglrx(0): EDID for output DFP8
[ 13.299] (II) fglrx(0): EDID for output DFP9
[ 13.299] (II) fglrx(0): EDID for output DFP10
[ 13.299] (II) fglrx(0): EDID for output CRT1
[ 13.299] (II) fglrx(0): Manufacturer: SAM Model: 124 Serial#: 1296707895
[ 13.299] (II) fglrx(0): Year: 2004 Week: 32
[ 13.299] (II) fglrx(0): EDID Version: 1.3
[ 13.299] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 13.299] (II) fglrx(0): Sync: Separate Composite
[ 13.299] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 13.299] (II) fglrx(0): Gamma: 2.20
[ 13.299] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 13.299] (II) fglrx(0): First detailed timing is preferred mode
[ 13.299] (II) fglrx(0): redX: 0.650 redY: 0.330 greenX: 0.330 greenY: 0.600
[ 13.299] (II) fglrx(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
[ 13.299] (II) fglrx(0): Supported established timings:
[ 13.299] (II) fglrx(0): 720x400@70Hz
[ 13.299] (II) fglrx(0): 640x480@60Hz
[ 13.299] (II) fglrx(0): 640x480@67Hz
[ 13.299] (II) fglrx(0): 640x480@72Hz
[ 13.299] (II) fglrx(0): 640x480@75Hz
[ 13.299] (II) fglrx(0): 800x600@56Hz
[ 13.299] (II) fglrx(0): 800x600@60Hz
[ 13.299] (II) fglrx(0): 800x600@72Hz
[ 13.299] (II) fglrx(0): 800x600@75Hz
[ 13.299] (II) fglrx(0): 832x624@75Hz
[ 13.299] (II) fglrx(0): 1024x768@60Hz
[ 13.299] (II) fglrx(0): 1024x768@70Hz
[ 13.299] (II) fglrx(0): 1024x768@75Hz
[ 13.299] (II) fglrx(0): 1280x1024@75Hz
[ 13.299] (II) fglrx(0): 1152x864@75Hz
[ 13.299] (II) fglrx(0): Manufacturer's mask: 0
[ 13.299] (II) fglrx(0): Supported standard timings:
[ 13.299] (II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 13.299] (II) fglrx(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 13.299] (II) fglrx(0): Supported detailed timing:
[ 13.299] (II) fglrx(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 13.299] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 13.299] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 13.299] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[ 13.299] (II) fglrx(0): Monitor name: SyncMaster
[ 13.299] (II) fglrx(0): Serial No: HCJX807028
[ 13.299] (II) fglrx(0): EDID (in hex):
[ 13.299] (II) fglrx(0): 00ffffffffffff004c2d240137314a4d
[ 13.299] (II) fglrx(0): 200e01036c221b782aaaa5a654549926
[ 13.299] (II) fglrx(0): 145054bfef808180714f010101010101
[ 13.299] (II) fglrx(0): 010101010101302a009851002a403070
[ 13.299] (II) fglrx(0): 1300520e1100001e000000fd00384b1e
[ 13.299] (II) fglrx(0): 510e000a202020202020000000fc0053
[ 13.299] (II) fglrx(0): 796e634d61737465720a2020000000ff
[ 13.299] (II) fglrx(0): 0048434a583830373032380a20200029
[ 13.299] (II) fglrx(0): Printing probed modes for output CRT1
[ 13.299] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 13.299] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 13.299] (II) fglrx(0): Modeline "1280x960"x75.0 135.00 1280 1296 1440 1688 960 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 13.299] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328 1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 13.299] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 13.299] (II) fglrx(0): Modeline "1152x864"x60.0 108.00 1152 1328 1440 1688 864 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 13.299] (II) fglrx(0): Modeline "1280x768"x75.0 135.00 1280 1296 1440 1688 768 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 13.299] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1328 1440 1688 768 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 13.299] (II) fglrx(0): Modeline "1280x720"x75.0 135.00 1280 1296 1440 1688 720 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 13.299] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1328 1440 1688 720 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 13.299] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 13.299] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 13.299] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 13.299] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 13.299] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 13.299] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 13.299] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 13.299] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 13.299] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
[ 13.299] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
[ 13.299] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 13.299] (II) fglrx(0): Output DFP1 disconnected
[ 13.299] (II) fglrx(0): Output DFP2 disconnected
[ 13.299] (II) fglrx(0): Output DFP3 disconnected
[ 13.299] (II) fglrx(0): Output DFP4 disconnected
[ 13.299] (II) fglrx(0): Output DFP5 disconnected
[ 13.299] (II) fglrx(0): Output DFP6 disconnected
[ 13.299] (II) fglrx(0): Output DFP7 disconnected
[ 13.299] (II) fglrx(0): Output DFP8 disconnected
[ 13.299] (II) fglrx(0): Output DFP9 disconnected
[ 13.299] (II) fglrx(0): Output DFP10 disconnected
[ 13.299] (II) fglrx(0): Output CRT1 connected
[ 13.299] (II) fglrx(0): Using exact sizes for initial modes
[ 13.299] (II) fglrx(0): Output CRT1 using initial mode 1280x1024
[ 13.299] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 13.299] (II) fglrx(0): DPI set to (96, 96)
[ 13.299] (II) fglrx(0): Eyefinity capable adapter detected.
[ 13.299] (II) fglrx(0): Adapter AMD Radeon HD 7900 Series has 6 configurable heads and 1 displays connected.
[ 13.299] (==) fglrx(0): PseudoColor visuals disabled
[ 13.299] (II) Loading sub module "ramdac"
[ 13.299] (II) LoadModule: "ramdac"
[ 13.299] (II) Module "ramdac" already built-in
[ 13.299] (==) fglrx(0): NoDRI = NO
[ 13.299] (==) fglrx(0): Capabilities: 0x00000000
[ 13.299] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 13.299] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 13.299] (==) fglrx(0): UseFastTLS=0
[ 13.299] (II) fglrx(0): Desktop Vsync is enabled.
[ 13.299] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 13.300] (II) fglrx(1): === [xdl_xs113_atiddxPreInit] === begin
[ 13.300] (**) fglrx(1): Depth 24, (--) framebuffer bpp 32
[ 13.300] (II) fglrx(1): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 13.300] (==) fglrx(1): Default visual is TrueColor
[ 13.300] (**) fglrx(1): Option "DPMS" "true"
[ 13.300] (==) fglrx(1): RGB weight 888
[ 13.300] (II) fglrx(1): Using 8 bits per RGB
[ 13.300] (==) fglrx(1): Buffer Tiling is ON
[ 13.300] (II) Loading sub module "fglrxdrm"
[ 13.300] (II) LoadModule: "fglrxdrm"
[ 13.300] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so
[ 13.300] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 13.300] compiled for 1.4.99.906, module version = 9.0.2
[ 13.311] ukiDynamicMajor: found major device number 250
[ 13.311] ukiDynamicMajor: found major device number 250
[ 13.311] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 13.312] ukiOpenDevice: node name is /dev/ati/card0
[ 13.312] ukiOpenDevice: open result is 15, (OK)
[ 13.312] ukiOpenByBusid: ukiOpenMinor returns 15
[ 13.312] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 13.312] (WW) fglrx(1): Unable to register ADL handler for 0x00C00000
[ 13.312] (**) fglrx(1): NoAccel = NO
[ 13.312] (**) fglrx(1): AMD 2D Acceleration Architecture enabled
[ 13.312] (--) fglrx(1): Chipset: "AMD Radeon HD 6900 Series " (Chipset = 0x6719)
[ 13.312] (--) fglrx(1): (PciSubVendor = 0x1545, PciSubDevice = 0x6950)
[ 13.312] (==) fglrx(1): board vendor info: third party graphics adapter - NOT original AMD
[ 13.312] (--) fglrx(1): Linear framebuffer (phys) at 0xc0000000
[ 13.312] (--) fglrx(1): MMIO registers at 0xfe920000
[ 13.312] (--) fglrx(1): I/O port at 0x0000d000
[ 13.312] (==) fglrx(1): ROM-BIOS at 0x000c0000
[ 13.312] (II) fglrx(0): AC Adapter is used
[ 13.312] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 13.312] (--) fglrx(1): Video RAM: 1048576 kByte, Type: GDDR5
[ 13.312] (II) fglrx(1): PCIE card detected
[ 13.312] (--) fglrx(1): Using per-process page tables (PPPT) as GART.
[ 13.312] (WW) fglrx(1): board is an unknown third party board, chipset is supported
[ 13.312] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf800000000, MCFBSize = 0x40000000)
[ 13.312] (II) fglrx(1): RandR 1.2 support is enabled!
[ 13.312] (II) fglrx(1): RandR 1.2 rotation support is enabled!
[ 13.312] (==) fglrx(1): Center Mode is disabled
[ 13.312] (II) Loading sub module "fb"
[ 13.312] (II) LoadModule: "fb"
[ 13.313] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 13.313] (II) Module fb: vendor="X.Org Foundation"
[ 13.313] compiled for 1.13.0, module version = 1.0.0
[ 13.313] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.313] (II) Loading sub module "ddc"
[ 13.313] (II) LoadModule: "ddc"
[ 13.313] (II) Module "ddc" already built-in
[ 13.394] (II) fglrx(1): Output DFP1 using monitor section aticonfig-Monitor[1]-0
[ 13.394] (II) fglrx(1): Output DFP2 has no monitor section
[ 13.394] (II) fglrx(1): Output DFP3 has no monitor section
[ 13.394] (II) fglrx(1): Output DFP4 has no monitor section
[ 13.394] (II) fglrx(1): Output DFP5 has no monitor section
[ 13.394] (II) fglrx(1): Output DFP6 has no monitor section
[ 13.394] (II) fglrx(1): Output DFP7 has no monitor section
[ 13.394] (II) fglrx(1): Output CRT1 has no monitor section
[ 13.394] (II) Loading sub module "ddc"
[ 13.394] (II) LoadModule: "ddc"
[ 13.394] (II) Module "ddc" already built-in
[ 13.394] (II) fglrx(1): Connected Display0: CRT1
[ 13.394] (II) fglrx(1): Display0: Failed to get EDID information.
[ 13.395] (II) fglrx(1): EDID for output DFP1
[ 13.395] (II) fglrx(1): EDID for output DFP2
[ 13.395] (II) fglrx(1): EDID for output DFP3
[ 13.395] (II) fglrx(1): EDID for output DFP4
[ 13.395] (II) fglrx(1): EDID for output DFP5
[ 13.395] (II) fglrx(1): EDID for output DFP6
[ 13.395] (II) fglrx(1): EDID for output DFP7
[ 13.395] (II) fglrx(1): EDID for output CRT1
[ 13.395] (II) fglrx(1): Manufacturer: DEL Model: 700e Serial#: 826553932
[ 13.395] (II) fglrx(1): Year: 2005 Week: 17
[ 13.395] (II) fglrx(1): EDID Version: 1.3
[ 13.395] (II) fglrx(1): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 13.395] (II) fglrx(1): Sync: Separate
[ 13.395] (II) fglrx(1): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 13.395] (II) fglrx(1): Gamma: 2.20
[ 13.395] (II) fglrx(1): DPMS capabilities: Off; RGB/Color Display
[ 13.395] (II) fglrx(1): Default color space is primary color space
[ 13.395] (II) fglrx(1): First detailed timing is preferred mode
[ 13.395] (II) fglrx(1): redX: 0.640 redY: 0.328 greenX: 0.300 greenY: 0.600
[ 13.395] (II) fglrx(1): blueX: 0.149 blueY: 0.060 whiteX: 0.312 whiteY: 0.328
[ 13.395] (II) fglrx(1): Supported established timings:
[ 13.395] (II) fglrx(1): 720x400@70Hz
[ 13.395] (II) fglrx(1): 640x480@60Hz
[ 13.395] (II) fglrx(1): 640x480@75Hz
[ 13.395] (II) fglrx(1): 800x600@60Hz
[ 13.395] (II) fglrx(1): 800x600@75Hz
[ 13.395] (II) fglrx(1): 1024x768@60Hz
[ 13.395] (II) fglrx(1): 1024x768@75Hz
[ 13.395] (II) fglrx(1): 1280x1024@75Hz
[ 13.395] (II) fglrx(1): Manufacturer's mask: 0
[ 13.395] (II) fglrx(1): Supported standard timings:
[ 13.395] (II) fglrx(1): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 13.395] (II) fglrx(1): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 13.395] (II) fglrx(1): Supported detailed timing:
[ 13.395] (II) fglrx(1): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 13.395] (II) fglrx(1): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 13.395] (II) fglrx(1): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 13.395] (II) fglrx(1): Serial No: 6418054J1D6L
[ 13.395] (II) fglrx(1): Monitor name: DELL E193FP
[ 13.395] (II) fglrx(1): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 145 MHz
[ 13.395] (II) fglrx(1): EDID (in hex):
[ 13.395] (II) fglrx(1): 00ffffffffffff0010ac0e704c364431
[ 13.395] (II) fglrx(1): 110f010368261e782ece50a3544c9926
[ 13.395] (II) fglrx(1): 0f5054a54b00714f8180010101010101
[ 13.395] (II) fglrx(1): 010101010101302a009851002a403070
[ 13.395] (II) fglrx(1): 1300782d1100001e000000ff00363431
[ 13.395] (II) fglrx(1): 383035344a3144364c0a000000fc0044
[ 13.395] (II) fglrx(1): 454c4c204531393346500a20000000fd
[ 13.395] (II) fglrx(1): 00384c1f530e000a202020202020003b
[ 13.395] (II) fglrx(1): Printing probed modes for output CRT1
[ 13.395] (II) fglrx(1): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 13.395] (II) fglrx(1): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 13.395] (II) fglrx(1): Modeline "1280x960"x75.0 135.00 1280 1296 1440 1688 960 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 13.395] (II) fglrx(1): Modeline "1280x960"x60.0 108.00 1280 1328 1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 13.395] (II) fglrx(1): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 13.395] (II) fglrx(1): Modeline "1152x864"x60.0 108.00 1152 1328 1440 1688 864 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 13.395] (II) fglrx(1): Modeline "1280x768"x75.0 135.00 1280 1296 1440 1688 768 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 13.395] (II) fglrx(1): Modeline "1280x768"x60.0 108.00 1280 1328 1440 1688 768 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 13.395] (II) fglrx(1): Modeline "1280x720"x75.0 135.00 1280 1296 1440 1688 720 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 13.395] (II) fglrx(1): Modeline "1280x720"x60.0 108.00 1280 1328 1440 1688 720 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 13.395] (II) fglrx(1): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 13.395] (II) fglrx(1): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 13.395] (II) fglrx(1): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 13.395] (II) fglrx(1): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 13.395] (II) fglrx(1): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 13.395] (II) fglrx(1): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 13.395] (II) fglrx(1): Output DFP1 disconnected
[ 13.395] (II) fglrx(1): Output DFP2 disconnected
[ 13.395] (II) fglrx(1): Output DFP3 disconnected
[ 13.395] (II) fglrx(1): Output DFP4 disconnected
[ 13.395] (II) fglrx(1): Output DFP5 disconnected
[ 13.395] (II) fglrx(1): Output DFP6 disconnected
[ 13.395] (II) fglrx(1): Output DFP7 disconnected
[ 13.395] (II) fglrx(1): Output CRT1 connected
[ 13.395] (II) fglrx(1): Using exact sizes for initial modes
[ 13.395] (II) fglrx(1): Output CRT1 using initial mode 1280x1024
[ 13.395] (II) fglrx(1): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 13.395] (II) fglrx(1): DPI set to (96, 96)
[ 13.395] (WW) fglrx(0): Unable to register ADL handler for 0x00110000
[ 13.395] (WW) fglrx(0): Unable to register ADL handler for 0x00120000
[ 13.395] (WW) fglrx(0): Unable to register ADL handler for 0x00130000
[ 13.395] (WW) fglrx(0): Unable to register ADL handler for 0x00150000
[ 13.395] (II) fglrx(1): Eyefinity capable adapter detected.
[ 13.395] (II) fglrx(1): Adapter AMD Radeon HD 6900 Series has 6 configurable heads and 1 displays connected.
[ 13.395] (==) fglrx(1): PseudoColor visuals disabled
[ 13.395] (II) Loading sub module "ramdac"
[ 13.395] (II) LoadModule: "ramdac"
[ 13.395] (II) Module "ramdac" already built-in
[ 13.395] (==) fglrx(1): NoDRI = NO
[ 13.395] (==) fglrx(1): Capabilities: 0x00000000
[ 13.395] (==) fglrx(1): CapabilitiesEx: 0x00000000
[ 13.395] (==) fglrx(1): OpenGL ClientDriverName: "fglrx_dri.so"
[ 13.395] (==) fglrx(1): UseFastTLS=0
[ 13.395] (II) fglrx(1): Desktop Vsync is enabled.
[ 13.396] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 13.396] (--) Depth 24 pixmap format is 32 bpp
[ 13.396] Loading extension ATIFGLRXDRI
[ 13.396] (II) fglrx(0): doing swlDriScreenInit
[ 13.396] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 13.396] ukiDynamicMajor: found major device number 250
[ 13.396] ukiDynamicMajor: found major device number 250
[ 13.396] ukiDynamicMajor: found major device number 250
[ 13.396] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 13.396] ukiOpenDevice: node name is /dev/ati/card0
[ 13.396] ukiOpenDevice: open result is 16, (OK)
[ 13.396] ukiOpenByBusid: ukiOpenMinor returns 16
[ 13.396] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 13.396] ukiOpenDevice: node name is /dev/ati/card1
[ 13.396] ukiOpenDevice: open result is 16, (OK)
[ 13.396] ukiOpenByBusid: ukiOpenMinor returns 16
[ 13.396] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 13.396] (II) fglrx(0): [uki] DRM interface version 1.0
[ 13.396] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 13.396] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 13.396] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7ffd260e0000
[ 13.396] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 13.396] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 13.396] (II) fglrx(0): swlDriScreenInit done
[ 13.396] (II) fglrx(0): Kernel Module Version Information:
[ 13.396] (II) fglrx(0): Name: fglrx
[ 13.396] (II) fglrx(0): Version: 9.0.2
[ 13.396] (II) fglrx(0): Date: Sep 20 2012
[ 13.396] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 13.396] (II) fglrx(0): Kernel Module version matches driver.
[ 13.396] (II) fglrx(0): Kernel Module Build Time Information:
[ 13.396] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.5.0-17-generic
[ 13.396] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 13.396] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 13.396] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 13.396] (II) fglrx(0): [uki] register handle = 0x00004000
[ 13.397] (II) fglrx(0): DRI initialization successfull
[ 13.397] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01040000
[ 13.397] (==) fglrx(0): Backing store disabled
[ 13.397] Loading extension FGLRXEXTENSION
[ 13.397] (**) fglrx(0): DPMS enabled
[ 13.397] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 13.397] (**) fglrx(0): Textured Video is enabled.
[ 13.397] (II) LoadModule: "glesx"
[ 13.397] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/glesx.so
[ 13.398] (II) Module glesx: vendor="X.Org Foundation"
[ 13.398] compiled for 1.4.99.906, module version = 1.0.0
[ 13.398] Loading extension GLESX
[ 13.398] (II) fglrx(0): GLESX enableFlags = 592
[ 13.398] (II) fglrx(0): GLESX is enabled
[ 13.398] (II) LoadModule: "amdxmm"
[ 13.398] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/amdxmm.so
[ 13.398] (II) Module amdxmm: vendor="X.Org Foundation"
[ 13.398] compiled for 1.4.99.906, module version = 2.0.0
[ 13.406] Loading extension AMDXVOPL
[ 13.406] Loading extension AMDXVBA
[ 13.406] (II) fglrx(0): Composite extension is not loaded
[ 13.406] (WW) fglrx(0): Option "VendorName" is not used
[ 13.406] (WW) fglrx(0): Option "ModelName" is not used
[ 13.406] (II) fglrx(0): X context handle = 0x1
[ 13.406] (II) fglrx(0): [DRI] installation complete
[ 13.406] (==) fglrx(0): Silken mouse enabled
[ 13.406] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 13.406] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 13.527] (II) fglrx(0): Framebuffer compression enabled: mcAddr=0xf40b960000 width=0xa00 height=0x1934
[ 13.527] (--) RandR disabled
[ 13.527] (II) fglrx(1): doing swlDriScreenInit
[ 13.527] (II) fglrx(1): swlDriScreenInit for fglrx driver
[ 13.527] ukiDynamicMajor: found major device number 250
[ 13.527] ukiDynamicMajor: found major device number 250
[ 13.527] ukiDynamicMajor: found major device number 250
[ 13.527] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 13.527] ukiOpenDevice: node name is /dev/ati/card0
[ 13.527] ukiOpenDevice: open result is 17, (OK)
[ 13.527] ukiOpenByBusid: ukiOpenMinor returns 17
[ 13.527] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 13.527] (II) fglrx(1): [uki] DRM interface version 1.0
[ 13.527] (II) fglrx(1): [uki] created "fglrx" driver at busid "PCI:2:0:0"
[ 13.527] (II) fglrx(1): [uki] added 8192 byte SAREA at 0x19000
[ 13.527] (II) fglrx(1): [uki] mapped SAREA 0x19000 to 0x7ffd201c0000
[ 13.527] (II) fglrx(1): [uki] framebuffer handle = 0x1a000
[ 13.527] (II) fglrx(1): [uki] added 1 reserved context for kernel
[ 13.527] (II) fglrx(1): swlDriScreenInit done
[ 13.527] (II) fglrx(1): Kernel Module Version Information:
[ 13.528] (II) fglrx(1): Name: fglrx
[ 13.528] (II) fglrx(1): Version: 9.0.2
[ 13.528] (II) fglrx(1): Date: Sep 20 2012
[ 13.528] (II) fglrx(1): Desc: AMD FireGL DRM kernel module
[ 13.528] (II) fglrx(1): Kernel Module version matches driver.
[ 13.528] (II) fglrx(1): Kernel Module Build Time Information:
[ 13.528] (II) fglrx(1): Build-Kernel UTS_RELEASE: 3.5.0-17-generic
[ 13.528] (II) fglrx(1): Build-Kernel MODVERSIONS: yes
[ 13.528] (II) fglrx(1): Build-Kernel __SMP__: yes
[ 13.528] (II) fglrx(1): Build-Kernel PAGE_SIZE: 0x1000