 Show Posts
|
|
Pages: [1] 2 »
|
-TST- Mining Poolhttp://neoscrypt.pro
No register needed.. based on Yiimp pool..
Payout : Every 1 hour
Fee : 0.6%
-a lyra2z -o stratum+tcp://neoscrypt.pro:4553 -u <WALLET_ADDRESS> -p c=CRS |
|
|
|
-TST- Mining Pool http://neoscrypt.proNo register needed.. based on Yiimp pool.. Payout : Every 1hour Fee : 0.9% Code: -a neoscrypt -o stratum+tcp://neoscrypt.pro:4233 -u <WALLET_ADDRESS> -p c=ZOC |
|
|
|
the network has died  |
|
|
|
-TST- Mining Pool http://neoscrypt.proNo register needed.. based on Yiimp pool.. Payout : Every 1 hour Fee : 0.6% Code: -a neoscrypt -o stratum+tcp://neoscrypt.pro:4233 -u GeUPdpTVvz9h89GaJdAJcK5xAPxm1V7FBg -p c=qbic Code: Bounty Address: GeUPdpTVvz9h89GaJdAJcK5xAPxm1V7FBg |
|
|
|
 there is no found block on alternative pools! |
|
|
|
Hi, I finished manual payments from neoscrypt.pro pool. In the enclosed exel-file https://www.dropbox.com/s/gkwb7cl6sim907l/55555.xlsx?dl=0 of the address, the sum and transaction. Please check. http://explorer.muncoin.info:3001/I am guilty to you and I apologize. There was a strong wish to win in a race - start of the first pool and we didn't make necessary checks. At some point the pool refused to pay the sums from balance in the automatic mode. Not to keep you waiting, the decision to stop mining of this coin, and to make manual payments was made. The research of a problem will be continued. If someone has information, please share with me and community. I ask to excuse me for my English. I congratulate all merry Christmas and New Year! PS Night without dream, I go to a bed. I haven't received this https://neoscrypt.pro/?address=MT4dxFfKzdJXtbtmjnUtKfYxWZKD7ULoxADone. tx 67a92c7740cde1b411a5da29b363ec21920691cc9da95f017c84a28ef1ad14be |
|
|
|
Same for me: MRrgJhq9963Qmq9fUmYeHwoATcFBxoLTF4 Thank you for your work, I appreciate the way you're handling this. tnx. tx 9336463f6e075319e3ea0f9b6a01d1569b477a9eeacaee8ac178121ac6f5ad06 |
|
|
|
Hello -TST- Pool Admin,
The last manual payout went through and got part of the coins. However, part that was supposed to be paid by the auto payment did not get through. Missing 0.28701890 coins. Could you please help? Thanks very much.
Address: MBddyHqbWAsrC1s2i65D3YMiYcBpu75om4
HardWorkingMiner
Done. tx 98a31aaad4b223a42dd5757a31e2327270be9e353acf0193010e0d4f012fa422 done. https://altmix.org/coins/17-MUNcoin/explorer/address/MNHDx5Gw4PgbzpuLra8asSV3j19P38DrkXDone. tx 5e155391a7b267cbfb6ccc5044793a01b3b62647cd30f8106d6d40ff37f0d7a7 |
|
|
|
No payment from yesterday one GPU test mine on https://neoscrypt.pro. Address is MKwksJT5mRknFpHN49mmLQ4tcqL3UwZ23V. Moved to suprnova for now. Done. Tx d79efeda6edd0bd78203012f6a141f67dc621bdec73d3846b0cb2f9246d9d047 |
|
|
|
done. tx 3963520f3c397f6d65a32281b59a3382f3498e570318cb522dbfdb248abf4208 |
|
|
|
done. tx 4b7dc118d6b3f5c337c63bf0a1b289ad89c1cd89c69f25389fab015ed51b4a9a |
|
|
|
Hi, I finished manual payments from neoscrypt.pro pool. In the enclosed exel-file https://www.dropbox.com/s/gkwb7cl6sim907l/55555.xlsx?dl=0 of the address, the sum and transaction. Please check. http://explorer.muncoin.info:3001/I am guilty to you and I apologize. There was a strong wish to win in a race - start of the first pool and we didn't make necessary checks. At some point the pool refused to pay the sums from balance in the automatic mode. Not to keep you waiting, the decision to stop mining of this coin, and to make manual payments was made. The research of a problem will be continued. If someone has information, please share with me and community. I ask to excuse me for my English. I congratulate all merry Christmas and New Year! PS Night without dream, I go to a bed.  NO PAYOUT FOR ME AND MY FRIEND  address 1 : M94gTiNeFRE2PjSp7QhbeW8oAUjicGVGmZ address 2 : MK5Ja3qhfEXkhZ8FZXU66gGUAL5fT5DHaV   I am waiting for the payout  Done M94gTiNeFRE2PjSp7QhbeW8oAUjicGVGmZ b78e418684d1989271551981e692af03693a7fb71c02abacda57407231942ee2 MK5Ja3qhfEXkhZ8FZXU66gGUAL5fT5DHaV 8bdc716425a48335e7e0c845fac58a29bb7071c093970dbb622dca9f44e11541 |
|
|
|
-TST- Mining Poolhttp://neoscrypt.pro
No register needed.. based on Yiimp pool..
Payout : Every 1hour
Fee : 0.5%
-a skunk -o stratum+tcp://neoscrypt.pro:8433 -u <WALLET_ADDRESS> -p c=MUN Bounty Address: M92K8HVWmQDASQLEfS5sbHEHjL8yxrFycf I did not get paid MDg1a5Jz7rjXaGWry6AFecPnkZkcekgYiD Done. tx d241220aefc79933973df416ca40d4ecc14d77e252aace714b5406d495ff7c3b |
|
|
|
I didn't receive my payment: MQJGaMWG4n2JyK1MabXW2PE4PkQUiGFQWm
Done tx 90b4d318bd17bad4ea06b7d4951f9223c097ce84c0053aa0ed3d62d11a2f5573 |
|
|
|
Hi, I finished manual payments from neoscrypt.pro pool. In the enclosed exel-file https://www.dropbox.com/s/gkwb7cl6sim907l/55555.xlsx?dl=0 of the address, the sum and transaction. Please check. http://explorer.muncoin.info:3001/I am guilty to you and I apologize. There was a strong wish to win in a race - start of the first pool and we didn't make necessary checks. At some point the pool refused to pay the sums from balance in the automatic mode. Not to keep you waiting, the decision to stop mining of this coin, and to make manual payments was made. The research of a problem will be continued. If someone has information, please share with me and community. I ask to excuse me for my English. I congratulate all merry Christmas and New Year! PS Night without dream, I go to a bed. |
|
|
|
|
Hi, please tell in more detail about this bug, and decision methods.
Thanks.
|
|
|
|
POLIS has been added to https://neoscrypt.pro/ Stratum settings: -o stratum+tcp://neoscrypt.pro:3533 -u POLIS_WALLET_ADDRESS -p c=POLIS Payouts are made automatically every 1 hours for all balances above 0.01, or 0.001 on Sunday. Pool is in Moscow. |
|
|
|
With the 12x biostar nearly here, I don't think this is the right change to make. If the biostar can actually run 12x GPUs then I will for sure; not make this alteration. If it can only support 9x or less GPUs then I will consider making the change.
Speaking of 12gpu motherboards, I've got an ASRock 13 GPU board arriving next week. Any thoughts on how to configure nvOC with an ASRock to get as many as possible of the GPUs running NVidia? (my current board is an ASRock z270 that loads 6 GPUs without too much trouble, but the new board is H110, not Z270) I've got 9 GPUs on hand to try - 8 1070s and a 980 ti. In theory v0017+ can support 14 GPUs (13 + 1 via m2 adapter with that ASRock mobo). But the chipset might not currently be supported and there are likely other system changes needed. I need one of those mobos to test. Where did you order one from? With the 12x biostar nearly here, I don't think this is the right change to make. If the biostar can actually run 12x GPUs then I will for sure; not make this alteration. If it can only support 9x or less GPUs then I will consider making the change.
Speaking of 12gpu motherboards, I've got an ASRock 13 GPU board arriving next week. Any thoughts on how to configure nvOC with an ASRock to get as many as possible of the GPUs running NVidia? (my current board is an ASRock z270 that loads 6 GPUs without too much trouble, but the new board is H110, not Z270) I've got 9 GPUs on hand to try - 8 1070s and a 980 ti. In theory v0017+ can support 14 GPUs (13 + 1 via m2 adapter with that ASRock mobo). But the chipset might not currently be supported and there are likely other system changes needed. I need one of those mobos to test. Where did you order one from? I got mine from Newegg.. according to ASRock, Newegg is expecting another shipment to arrive next week so you might want to setup an autonotify on the website. He also did not provide any other distributors that I could check for stock, so newegg might be the only source for them right now. https://www.newegg.com/Product/Product.aspx?Item=N82E16813157781Thanks for links.  SUPX LIMITED EDITION B250 12-GPU MOTHERBOARD https://www.youtube.com/watch?v=exjRTIZu89Q How to Build a 12 GPU Mining Rig |
|
|
|
First off thanks for all the work Fullzero!
I've been fighting with Win10 on my rig for a month. Can't get it to recognize any more than 3 of my 1070 cards, and one always is disabled with an error. So I've decided to dump Win10.
I've just got nvoc 0017 running with my old USB 2.0 stick on my ASUS Prime Z270-A with 6 Geforce GTX 1070s rig and I am not sure now how to get the mining started.
I guess I was under the impression that it would start automatically on boot but I must have missed something in the setup. It's just sitting there with the terminal screen open.
Also in the Nvidia X server settings it's also only recognizing 3 of the 1070 gpus. I'm hoping this is something that can be easily worked out as I'd hate to think that 3 of the 6 1070's I have only had for a month are bad.
Thanks in advance for any help.
If you had the same problem with windows only recognizing 3 out of 6 GPUs; this indicates there is most likely a hardware problem. Have you tried swapping your risers? How are you powering your risers? What kind of risers are you using? If you run with only 3x GPUs and it works: swap out the 3 working GPUs with the 3 that aren't being recognized and see if they work. Actually hardware wise I've already change motherboards thinking it was the MSI Z170A SLI Plus that I started out with. I sent it back to Amazon earlier this week and ordered the Asus. The risers are directly powered by the SATA cable from the PSU. These are the risers... https://www.amazon.com/Extender-Powered-Extension-Adapter-Card-Currency/dp/B072MFBYCM/ref=sr_1_10?s=electronics&ie=UTF8&qid=1499386958&sr=1-10&keywords=PCIe%2BPowered%2BRiser%2BAdapter%2BCard%2B-%2BUSB%2B3.0%2BPCIe%2B1x%2Bto%2B16x%2BExtender%2BCard%2B-%2B6-Pin%2BPCI-E%2Bto%2BSATA%2BPower%2BCable&th=1Yes I have swapped them around many time, but when I was on win10, haven't yet with nvoc as I just got it going tonight. All of them worked in that testing. Just a side note here.... I shut down the rig after I posted the first post and just powered it back a few mins ago. Getting this scrolling on the terminal now... bash: /media/m1/1263-A96E/oneBash: Permission denied dos2unix: /media/m1/1263-A96E/oneBash: No such file or directory dos2unix: Skipping /media/m1/1263-A96E/oneBash, not a regular file. I have to laugh at myself cause I've obviously dorked something up I guess. This usually means there is a problem with the image. I would re image the USB key. Let me know if that works. hi, it is not problems of image. these are problems of the FAT32 file system which falls after each incorrect reset. You can find such line in dmesg: 120.350515] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
I don't trust FAT32 and have transferred oneBash to other place. At me it is impossible to stabilize my system in any way. I observe a large number of restarts which I can't analyse. Syslog doesn't contain anything useful. m1@m1-desktop:~$ last reboot
reboot system boot 4.4.0-83-generic Sun Jul 9 04:36 still running
reboot system boot 4.4.0-83-generic Sun Jul 9 00:00 still running
reboot system boot 4.4.0-83-generic Sat Jul 8 17:50 still running
reboot system boot 4.4.0-83-generic Sat Jul 8 15:31 still running
reboot system boot 4.4.0-83-generic Sat Jul 8 14:56 still running
reboot system boot 4.4.0-83-generic Sat Jul 8 14:48 still running
reboot system boot 4.4.0-83-generic Sat Jul 8 12:58 still running
reboot system boot 4.4.0-83-generic Sat Jul 8 10:10 still running
reboot system boot 4.4.0-83-generic Sat Jul 8 09:54 still running
reboot system boot 4.4.0-83-generic Sat Jul 8 08:27 still running
reboot system boot 4.4.0-83-generic Sat Jul 8 03:16 still running
reboot system boot 4.4.0-83-generic Fri Jul 7 23:31 still running
reboot system boot 4.4.0-83-generic Fri Jul 7 22:52 still running
reboot system boot 4.4.0-83-generic Fri Jul 7 20:02 still running
reboot system boot 4.4.0-83-generic Fri Jul 7 16:26 still running
reboot system boot 4.4.0-83-generic Fri Jul 7 10:00 still runningI need methodology of a solution. How to find the reason of a collapse of an operating system and restart. What video card exceeds admissible values and is unstable? I think it it will be interesting to many. Thank you very much! I had a problem with the fat32 partition on my images. I just had to reimage it... use HDD Raw Copy. It doesn't ALWAYS work, but it does most of the time. Also, make sure your flash drive or hard drive is bigger than 16gb. I ran into a problem with mine where the drive was just a hair shy of the required size for the image and that caused partition file table problems that made the first part unreadable. You could also use gparted to try to repair the partition which works sometimes. Or use TestDisk if you're savvy with partition file table manipulation at all. http://www.cgsecurity.org/wiki/TestDisk_DownloadIt isn't important at all as you do image what software and in what operating system. At the first loading everything is read perfectly! Important the fact that after incorrect completion of nvOC (for example the system is too overclocked) data on FAT32 /dev/sda1 are damaged and you are stimulated every time to repair this partition and to do mount, remount. look above how many restarts of nvOC at me happen in days. Every time is a potential problem of damage of FAT32. IMHO needs to refuse this partition, to transfer oneBash to other directory and to modify it, using gnome (local) or ssh, sftp (remote). Of course I will try to find the stable and balanced configuration of my system. I plunge into Linux more and more and I look for analysis techniques of system dumps. All of good luck! |
|
|
|
|
