Should I reboot this?
I fired my node up: 73.73.73.122
I am probably way far behind but if anyone else would like to get this rolling again, let's do it!
Hey Jude, I'm trying to connect .... Hi, I setup a VPS with a node: 192.3.112.130 Give that a shot! I will get a pool up and explorer soon. Thanks, Jude |
|
|
|
|
Should I reboot this?
I fired my node up: 73.73.73.122
I am probably way far behind but if anyone else would like to get this rolling again, let's do it!
|
|
|
|
If I recall correctly, the initial test only uses CPU.
Try running it for real and see if you get different results.
I see... I have test it the last 2 days but I'm not sure how better is running that before with only CPU. While trying to run my machine at maximum power, I have notice that there are gpu options which I do not understand well how to use them. I have 2 gpu on my machine, 1 intel and 1 nvidia. This is the command I'm using right now: ./LBC -id username -s password --gpu -c 4 -t 600 -delay 180 I guess using the command above it's not using both gpu or maybe use intel which has less power than nvidia. How to use both gpu? Or if I had to use only 1 gpu, then how to know is using the best which is nvidia? *Also at manual it's says that e.g. -t 10 = 10 minutes, as far I test it -t 60 = 5 minutes, maybe is a bug? Also try it with 1:0, it gives me the same results. What I want is to give it a delay 3 minutes after 1 hour running. Thanks again. Intel is on-board and will get the same speed as CPU. You can only really use the Nvidia card. |
|
|
|
Hi guys,
I've been thinking a lot about old, forgotten and abandoned BTC wallets and the way they can be accessed. In that research, I saw this project that inspired me and I want to join the project.
Could you give me a PC configuration recommendation, to pay attention to whether is more important CPU or GPU , whether one GPU is enough or more, how much RAM, and more. What is minimum configuration for good participation in this project.
Give me some recommendation, some advice about hardware, what should I pay attention to.
Thanks a lot for every one.
p.s. Who knows, maybe we sometimes get into Satoshi's wallet, it's never known...
Would be better off using: https://github.com/brichard19/BitCrack |
|
|
|
|
Where can I get the client?
I found my old wallet.dat.
|
|
|
|
You have to set a secret (Password) but you also might still have to be on the GPU list.
You will have to ask Rico.
You have absolutely right. I set password and gpu has been authorized thank you! GPU authorized: yes
Will use 4 CPUs.
Ask for work... got blocks [33644116996-33644119619] (2751 Mkeys)
2 just got out of the pool with exit code: 255
1 just got out of the pool with exit code: 255
0 just got out of the pool with exit code: 255
3 just got out of the pool with exit code: 255
Sending invalidation info. However even if I have enable gpu, the speed is the same when I make a test. ./LBC -x
Will use 4 CPUs.
Testing mode. Using page 0, turning off looping.
Benchmark info not found - benchmarking... done.
Your speed is roughly 797883 keys/s per CPU core.
o
Test ok. Your test results were stored in FOUND.txt.
Have a look and then you may want to remove the file.
2d17543d32448acc7a1c43c5f72cd5be459ab302:u:priv:0000000000000000000000000000000000000000000000000000000000000001 + 0x5e
02e62151191a931d51cdc513a86d4bf5694f4e51:c:priv:0000000000000000000000000000000000000000000000000000000000000001 + 0x65
9d74ffdb31068ca2a1feb8e34830635c0647d714:u:priv:00000000000000000000000000000000000000000000000000000000000f9001 + 0xf8c
3d6871076780446bd46fc564b0c443e1fd415beb:c:priv:00000000000000000000000000000000000000000000000000000000000f9001 + 0xf8c
Ending test run. Same speed I had before enable gpu, why speed isn't increased? Thanks in advance. If I recall correctly, the initial test only uses CPU. Try running it for real and see if you get different results. |
|
|
|
Hello, I have just installed on linux machine, works fine except that is not authorize my CPU. ./LBC --gpu
GPU authorized: no
Will use 4 CPUs.
Ask for work... Server doesn't like us. Answer: wrong secret. My Nvidia drivers are already installed. ubuntu-drivers devices
== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
modalias : pci:v000010DEd0000139Bsv000017AAsd00003802bc03sc02i00
vendor : NVIDIA Corporation
model : GM107M [GeForce GTX 960M]
driver : nvidia-driver-390 - distro non-free recommended
driver : xserver-xorg-video-nouveau - distro free builtin I have install "nvidia-driver-390" driver. My gpu is not supported or I have done something wrong? Thanks in advance! You have to set a secret (Password) but you also might still have to be on the GPU list. You will have to ask Rico. |
|
|
|
|
Has anyone been accepted on the Puzzle Hunter Pool telegram??
|
|
|
|
When stopping LBC in terminal during sleep period, Ctrl+C gives me "stop gracefully by using ^e" or something like that, yet Ctrl+C still achieves my purpose and even says notifies host of not finishing homework or whatever which makes me feel better. Tried Ctrl+E didn't do anything.
Please help me gracefully exit the LBC when I desire.
Tbh the pool is renewing my interest in linux, however my knowledge of keyboard shortcuts and the finer details of the OS are eluding me, I just wanna get my CPU's down and dirty collidin-n-findin
Thanks,
-J
Yeah, CTRL+E works it just takes a really long time to finally end. It has to finish all the work on all the cores first and submit it. |
|
|
|
sudo apt-get install make
edit: sudo apt-get install build-essential
Thanks for helping me, appreciate it! JSON issue seems to be resolved at vmware, here is what I get know: sterg@ubuntu:~/Downloads$ ./LBC -x
Will use 2 CPUs.
Testing mode. Using page 0, turning off looping.
Benchmark info not found - benchmarking... ./kardashev-haswell: error while loading shared libraries: libOpenCL.so.1: cannot open shared object file: No such file or directory
Generator validity check failed. Expected: 5 or 7, Got: 0
With output:
-- sudo apt-get install ocl-icd-opencl-dev Thousand thanks dear Jude!!! sterg@ubuntu:~/Downloads$ ./LBC -x
Will use 2 CPUs.
Testing mode. Using page 0, turning off looping.
Benchmark info not found - benchmarking... done.
Your speed is roughly 804993 keys/s per CPU core.
o
Test ok. Your test results were stored in FOUND.txt.
Have a look and then you may want to remove the file.
2d17543d32448acc7a1c43c5f72cd5be459ab302:u:priv:0000000000000000000000000000000000000000000000000000000000000001 + 0x5e
02e62151191a931d51cdc513a86d4bf5694f4e51:c:priv:0000000000000000000000000000000000000000000000000000000000000001 + 0x65
9d74ffdb31068ca2a1feb8e34830635c0647d714:u:priv:00000000000000000000000000000000000000000000000000000000000f9001 + 0xf8c
3d6871076780446bd46fc564b0c443e1fd415beb:c:priv:00000000000000000000000000000000000000000000000000000000000f9001 + 0xf8c
Ending test run. You're welcome!  |
|
|
|
sudo apt-get install make
edit: sudo apt-get install build-essential
Thanks for helping me, appreciate it! JSON issue seems to be resolved at vmware, here is what I get know: sterg@ubuntu:~/Downloads$ ./LBC -x
Will use 2 CPUs.
Testing mode. Using page 0, turning off looping.
Benchmark info not found - benchmarking... ./kardashev-haswell: error while loading shared libraries: libOpenCL.so.1: cannot open shared object file: No such file or directory
Generator validity check failed. Expected: 5 or 7, Got: 0
With output:
-- sudo apt-get install ocl-icd-opencl-dev |
|
|
|
I chmod and make LBC executable. But now new problem comes up: JSON not found - installing it.
Loading internal null logger. Install Log::Log4perl for logging messages But fail to install it. Why? sudo cpan install JSON I install all of the requirements using cpan instead of the LBC binary. I feel like it's faster. [/quote] It's fail: sterg@LAPTOP:~$ sudo cpan install JSON
Loading internal null logger. Install Log::Log4perl for logging messages
Reading '/home/sterg/.cpan/Metadata'
Database was generated on Tue, 22 Jan 2019 13:17:03 GMT
Running install for module 'JSON'
Checksum for /home/sterg/.cpan/sources/authors/id/I/IS/ISHIGAKI/JSON-4.01.tar.gz ok
'YAML' not installed, will not store persistent state
Configuring I/IS/ISHIGAKI/JSON-4.01.tar.gz with Makefile.PL
Welcome to JSON (v.4.01)
=============================
** BACKWARD INCOMPATIBILITY **
Since version 2.90, stringification (and string comparison) for
JSON::true and JSON::false has not been overloaded. It shouldn't
matter as long as you treat them as boolean values, but a code that
expects they are stringified as "true" or "false" doesn't work as
you have expected any more.
if (JSON::true eq 'true') { # now fails
print "The result is 1 now."; # => The result is 1 now.
And now these boolean values don't inherit JSON::Boolean, either.
When you need to test a value is a JSON boolean value or not, use
JSON::is_bool function, instead of testing the value inherits
a particular boolean class or not.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for JSON
Writing MYMETA.yml and MYMETA.json
ISHIGAKI/JSON-4.01.tar.gz
/usr/bin/perl Makefile.PL INSTALLDIRS=site -- OK
Running make for I/IS/ISHIGAKI/JSON-4.01.tar.gz
---- Unsatisfied dependencies detected during ----
---- ISHIGAKI/JSON-4.01.tar.gz ----
JSON::XS [requires,optional]
ISHIGAKI/JSON-4.01.tar.gz
make -- NOT OK
No such file or directory
Running install for module 'JSON::XS'
Checksum for /home/sterg/.cpan/sources/authors/id/M/ML/MLEHMANN/JSON-XS-4.0.tar.gz ok
---- Unsatisfied dependencies detected during ----
---- MLEHMANN/JSON-XS-4.0.tar.gz ----
Canary::Stability [build_requires]
Running install for module 'Canary::Stability'
Checksum for /home/sterg/.cpan/sources/authors/id/M/ML/MLEHMANN/Canary-Stability-2012.tar.gz ok
Configuring M/ML/MLEHMANN/Canary-Stability-2012.tar.gz with Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Canary::Stability
Writing MYMETA.yml and MYMETA.json
MLEHMANN/Canary-Stability-2012.tar.gz
/usr/bin/perl Makefile.PL INSTALLDIRS=site -- OK
Running make for M/ML/MLEHMANN/Canary-Stability-2012.tar.gz
MLEHMANN/Canary-Stability-2012.tar.gz
make -- NOT OK
No such file or directory
MLEHMANN/JSON-XS-4.0.tar.gz
Has already been unwrapped into directory /home/sterg/.cpan/build/JSON-XS-4.0-9
Warning: Prerequisite 'Canary::Stability => 0' for 'MLEHMANN/JSON-XS-4.0.tar.gz' failed when processing 'MLEHMANN/Canary-Stability-2012.tar.gz' with 'make => NO'. Continuing, but chances to succeed are limited.
Configuring M/ML/MLEHMANN/JSON-XS-4.0.tar.gz with Makefile.PL
Can't locate Canary/Stability.pm in @INC (you may need to install the Canary::Stability module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.26.1 /usr/local/share/perl/5.26.1 /usr/lib/x86_64-linux-gnu/perl5/5.26 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.26 /usr/share/perl/5.26 /usr/local/lib/site_perl /usr/lib/x86_64-linux-gnu/perl-base .) at Makefile.PL line 4.
BEGIN failed--compilation aborted at Makefile.PL line 4.
Warning: No success on command[/usr/bin/perl Makefile.PL INSTALLDIRS=site]
MLEHMANN/JSON-XS-4.0.tar.gz
/usr/bin/perl Makefile.PL INSTALLDIRS=site -- NOT OK [/quote] sudo apt-get install make edit: sudo apt-get install build-essential |
|
|
|
Hey there, I'm new on linux. Since yesterday I am running LBC at vmware but I don't really like it because vmware tools doesn't work for copy-paste, there is not even a scrollbar on console. So I have installed Ubuntu a new machine on vmware and all required packages as you mention on installation pages. I have LBC perl file at downloads folder. From there I open the terminal. I don't know what I have doing wrong but when I type: I get: sudo: ./LBC: command not found Installation of the packages progress: sudo apt-get install libgmp3-dev - sudo apt-get update sudo apt-get install libssl-dev - sudo apt install gcc - sudo apt install make - wget https://lbc.cryptoguru.org/static/client/LBCI really like to make this work right, once I a planning to run this for a long time. Any help would me appreciated. Thanks in advance! EDITAlso tried the method via WLS and I got exactly the same issue! test@LAPTOP:~$ ./LBC -h
-bash: ./LBC: Permission denied
test@LAPTOP:~$ sudo ./LBC -h
sudo: ./LBC: command not found You have to set permissions: sudo chmod 755 LBC Should do the trick but don't put anything personal/private on that VM. I chmod and make LBC executable. But now new problem comes up: JSON not found - installing it.
Loading internal null logger. Install Log::Log4perl for logging messages But fail to install it. Why? sudo cpan install JSON I install all of the requirements using cpan instead of the LBC binary. I feel like it's faster. |
|
|
|
Hey there, I'm new on linux. Since yesterday I am running LBC at vmware but I don't really like it because vmware tools doesn't work for copy-paste, there is not even a scrollbar on console. So I have installed Ubuntu a new machine on vmware and all required packages as you mention on installation pages. I have LBC perl file at downloads folder. From there I open the terminal. I don't know what I have doing wrong but when I type: I get: sudo: ./LBC: command not found Installation of the packages progress: sudo apt-get install libgmp3-dev - sudo apt-get update sudo apt-get install libssl-dev - sudo apt install gcc - sudo apt install make - wget https://lbc.cryptoguru.org/static/client/LBCI really like to make this work right, once I a planning to run this for a long time. Any help would me appreciated. Thanks in advance! EDITAlso tried the method via WLS and I got exactly the same issue! test@LAPTOP:~$ ./LBC -h
-bash: ./LBC: Permission denied
test@LAPTOP:~$ sudo ./LBC -h
sudo: ./LBC: command not found You have to set permissions: sudo chmod 755 LBC Should do the trick but don't put anything personal/private on that VM. |
|
|
|
I'm unable to send or receive PMs here due to my newb status. I've set up a telegram group for anyone interested in learning about or joining the new pool.
t.me/puzzletxhunters
I joined! |
|
|
|
 I installed sudo cpan install LWP::Protocol::https already and sudo cpan install LWP::Protocol but still getting the same error. Try sudo apt-get liblwp-protocol-https-perl |
|
|
|
Hey guys I have ubuntu 18.04 installed and i am trying to get LBC to work but i am getting error. LWP::Protocol::https not found.
i try to install it using sudo install and cpan force install i get package not found.
Please help
Did you try: sudo cpan install LWP::Protocol::https ? Or: sudo cpan install LWP::Protocol |
|
|
|
Explorer, Pool, etc coming soon!
Give me a couple days to get it all setup.
Thanks,
Jude
Jude, make a better testnet and regtest! The designed Android wallet not works because the regtest and testnet3 are copy/pasted from Zetacoin The will become free only if it works as expected I see what you mean. Alright, I think I can fix this without having to do anything crazy. |
|
|
|
Explorer, Pool, etc coming soon!
Give me a couple days to get it all setup.
Thanks,
Jude
Jude, make a better testnet and regtest! The designed Android wallet not works because the regtest and testnet3 are copy/pasted from Zetacoin The will become free only if it works as expected I need more information. |
|
|
|
|
Show Posts
