 Show Posts
|
|
Pages: [1] 2 »
|
So I just checked the windows log and found loooooooooooots of this error. It's like every 5 seconds this log is generated.  A corrected hardware error has occurred.
Component: PCI Express Root Port
Error Source: Advanced Error Reporting (PCI Express)
Bus:Device:Function: 0x0:0x1C:0x6
Vendor ID:Device ID: 0x8086:0xA296
Class Code: 0x30400 I'm still trying to search how to fix it. Hopefully I get something useful. |
|
|
|
|
It may also be worth mentioning that sometimes the rig runs as long as 10hours+ before it hangs/freezes.
Most of the time its about 15-20mins.
This is the log.
ID Date Content
6764 18.07.2017 17:00:03 Miner: PJCoinPH2 Offline more than 2 minutes!
6746 18.07.2017 16:09:02 Miner: PJCoinPH2 Offline more than 2 minutes!
6742 18.07.2017 15:58:02 Miner: PJCoinPH2 Offline more than 2 minutes!
6724 18.07.2017 15:27:02 Miner: PJCoinPH2 Offline more than 2 minutes!
6675 18.07.2017 14:32:02 Miner: PJCoinPH2 Offline more than 2 minutes!
6632 18.07.2017 13:29:02 Miner: PJCoinPH2 Offline more than 2 minutes!
6617 18.07.2017 13:10:03 Miner: PJCoinPH2 Offline more than 2 minutes!
6609 18.07.2017 12:29:02 Miner: PJCoinPH2 Offline more than 2 minutes!
6600 18.07.2017 11:09:02 Miner: PJCoinPH2 Offline more than 5 minutes!
6596 18.07.2017 10:36:02 Miner: PJCoinPH2 Offline more than 5 minutes!
6440 18.07.2017 00:05:03 Miner: PJCoinPH2 Offline more than 5 minutes!
|
|
|
|
Mining stresses a rig in many ways, so just because it doesn't freeze up when not mining doesn't mean there is a problem.
I would start by shutting it down completely, re-seating all video cards, the RAM and reconnecting all cables to eliminate a loose connection somewhere. I would also check to make sure there is not dust or dirt build up and that the cpu heat-sink is secure to rule-out common heat trouble spots. Turn it back on and monitor it for awhile to make sure a GPU is not overheating causing the rig to lock up.
If it passes all this and you are still having issues, the next thing would be to try and remove and reinstall the video graphics drivers.
After doing all of the above, the next things to try would be removing one card and seeing if the rig runs well, repeating until you either found the problem card or eliminated them as the cause. You may need to let the rig run for a day or two in-between these steps, I am not sure how often your rig was freezing up before, so wait at least that long, and maybe double it to be sure.
Only thing I've done so far is change the risers and resintall the video graphics driver. I've tried to dowgrade/use the latest driver but still didn't resolve the issue. I'll try to reconnect the cables again and see. Any idea if there is windows log when the OS freezes? |
|
|
|
Its either your overclock settings, undervolt settings, or your risers are bad or your PSU is dying/cheap.
Could be anything really.
Too bad your rig freezes and halts. Most crashes usually cause a system reboot and you can auto-restart the mining but not when it hangs like this.
I already tried running the miner without undervolting and overclocking. Still got the same issue. My PSU is brand new. The rig is only less than two weeks. |
|
|
|
If you are running MSI afterburner, close it (using the "X") after the miner starts, I have a rig of 1060 and afterburner caused my rig to freeze, also, if you run less than 4 GPU's, try using EVGA Precision XOC.
My first rig with 6x Palit GTX 1060 3GB works fine even with the afterburner running. I also already tried running without the afterburner and without undervolting and overclocking but still the same issue. |
|
|
|
Hello. One of my rig is randomly freezing. Mouse and keyboard wont work. I have to do hard reset every time it happens. I'm using claymore 9.7. When I don't mine, the rig runs flawlessly. It doesn't hang or freeze. I checked the claymore log and there is nothing there. I'm not sure what is causing the error. Would reinstalling the OS help? Do i need to upgrade the ram to 8GB? Is there any windows log I can check why its happening? This is my specs: Motherboard: Biostar TB250-BTC PSU: Corsair HX1200 GPU: 6x Galax GTX 1060 6GB Memory: 4GB 2400Mhz Memory: Intel Celeron OS: Windows 10 Any help pls. I've been on this problem for a week now.  Edit: I'll be glad to reward (btc) whoever can point me to right direction to resolve the issue. I'm tired already. |
|
|
|
we need more people to join http://mine.house pool. this one of the best pool out there for dbix. |
|
|
|
So I have fully committed and switched to dbix mining from ethereum.
I am using claymore v9.6. When I swiched I get "miner thread hang" error.
I've been mining ethereum for days without a problem. Suddenly I'm getting this error in claymore when mining dbix. And it's a frequent error.
Anybody experienced the same? How did you fix it?
did you use -allcoins and -allpools flag on claymore? Try adding `-allcoins 1 -allpools 1` to your start.bat I did use -allcoins 1 but did not use -allpools 1. Any reason why it would hang without the allpools? I don't understand. Edit: This is the command I have in my config file now. I commented out -r 1 since I dont want to reboot everytime the miner thread hangs because its too frequent. Any comment on the below? ##DBIX## -epool dbix.pool.sexy:7007 -ewal 0x3AC9a4EB918f6d56D6b3F8a673575241E79f69DC -eworker PjCoinPh1 -epsw x -esm 0 -mode 1 -erate 1 -wd 1 -allcoins 1 -ejobtimeout 10 #-r 1 -dbg 1 -allpools 1 Follow up question. Whats the main difference between proportional rewards and PPLNS? How can I decide which is best for me. I'm just a small miner with 130mhs. From Claymores Readme: "-allpools Specify "-allpools 1" if miner does not want to mine on specified pool (because it cannot mine devfee on that pool), but you agree to use some default pools for devfee mining. " So the devfee can't be mined on a eth fork so you're allowing claymore to connect to another pool for the devfee. As far as PPLNS and PROP, from my understanding they are very similar miner takes the risk but PPLNS has more of a buffer from when you start and stop receiving you rewards http://139.162.205.147/topic/4144/guide-pps-rbpps-prop-pplns-whats-the-differenceThank you. I did read the readme but even before when I added allpools 1. Miner automatically switches to some ethereum pool for dev fee then switches back to dbix pool after. This is a bit confusing. Anyway, appreciate your help. I'll monitor the miner if it still hangs frequently even with allpools 1. |
|
|
|
So I have fully committed and switched to dbix mining from ethereum.
I am using claymore v9.6. When I swiched I get "miner thread hang" error.
I've been mining ethereum for days without a problem. Suddenly I'm getting this error in claymore when mining dbix. And it's a frequent error.
Anybody experienced the same? How did you fix it?
did you use -allcoins and -allpools flag on claymore? Try adding `-allcoins 1 -allpools 1` to your start.bat I did use -allcoins 1 but did not use -allpools 1. Any reason why it would hang without the allpools? I don't understand. Edit: This is the command I have in my config file now. I commented out -r 1 since I dont want to reboot everytime the miner thread hangs because its too frequent. Any comment on the below? ##DBIX## -epool dbix.pool.sexy:7007 -ewal 0x3AC9a4EB918f6d56D6b3F8a673575241E79f69DC -eworker PjCoinPh1 -epsw x -esm 0 -mode 1 -erate 1 -wd 1 -allcoins 1 -ejobtimeout 10 #-r 1 -dbg 1 -allpools 1 Follow up question. Whats the main difference between proportional rewards and PPLNS? How can I decide which is best for me. I'm just a small miner with 130mhs. |
|
|
|
|
So I have fully committed and switched to dbix mining from ethereum.
I am using claymore v9.6. When I swiched I get "miner thread hang" error.
I've been mining ethereum for days without a problem. Suddenly I'm getting this error in claymore when mining dbix. And it's a frequent error.
Anybody experienced the same? How did you fix it?
|
|
|
|
@zahidmoon. It still did not work for me  . All values are true after I entered it. When I restart wallet it's still not syncing. I'll post the vid in a while. dude just wait for wallet syncing just wait and check dbix wallet logs tab > gdbix whats its giving you if its giving you : please enable network time synchronization in system setting then you should have to wait to syncing the wallet with the network just leave the wallet open for a while if its still not working then contact with me on skype moon_light_rays skype address Yes. It's giving me that message.  Okay. I'll leave it open for as long as it can and see. Thanks for all your help! check your system time also and sync it with the internet from control panel > system date and time >internet time > change setting > select server and update now ooooohhhhh shit it started syncing!!!!!! You're the best man. I owe you big time! Hopefully I don't get any errors now. *fingers crossed* |
|
|
|
@zahidmoon. It still did not work for me . All values are true after I entered it. When I restart wallet it's still not syncing. I'll post the vid in a while. dude just wait for wallet syncing just wait and check dbix wallet logs tab > gdbix whats its giving you if its giving you : please enable network time synchronization in system setting then you should have to wait to syncing the wallet with the network just leave the wallet open for a while if its still not working then contact with me on skype moon_light_rays skype address Yes. It's giving me that message. Okay. I'll leave it open for as long as it can and see. Thanks for all your help! |
|
|
|
@zahidmoon. It still did not work for me . All values are true after I entered it. When I restart wallet it's still not syncing. I'll post the vid in a while. Update: here's the vid. https://www.youtube.com/watch?v=_lJjS8iotck&feature=youtu.beI already restarted everything including the pc. I'm not sure what's the problem now. |
|
|
|
|
Ok. Update. I've tried to run the nodes.bat file as administrator and i got these errors.
C:\Windows\system32>admin.addPeer("enode://1d1affca2ea45105897b2fc2de696cb95dd5dd06516db9a088b9d3ba1deefb81b3a7982ef5b728e09251e005af75c9db33ef1969bee0ed4a6df64b4452039be3@45.32.158.190:57955")
'admin.addPeer' is not recognized as an internal or external command,
operable program or batch file.
Anyone knows how to fix that?
|
|
|
|
guys help please. How to use the dbix wallet? sexy pool already sent the payout but I still haven't received it in my wallet. It's more than 12hrs now. check your wallet block number what is your wallet current block number if its match with the current block number with clona.ru:3005 block then everything is ok if not then your wallet is not syncing try to add node from gdbix and let your wallet sync and then see your coin will be shown in your wallet My wallet block no is 0. How do I sync it? There's no instructions included in this. Can't find where to sync. ok then i already post this in this thread but again i am posting it do exactly this start your wallet and leave it running then in your dbix wallet folder where gdbix.exe exists make a txt file open it and copy paste these nodes gdbix.exe attach admin.addPeer("enode://14a622abe7f93f589b1edca25e52b0a52ac0a2baf1387a197bd44bf5521068bd0c3687d6128afd410eed072b78332ced4ce4a550099b4e76710c9a89ce242088@45.32.65.104:57955") admin.addPeer("enode://39bb1c137d4d53017c39b5db3dd1b1dd8e44f710a2b55e79fdc0a1ebd0f139e6973420b1358f7e40f23eb5630b7605d25529fbac05aabdecdc2cfd4d0d2452d8@45.32.220.235:57955") admin.addPeer("enode://8cda27e3d924155bc8a823b95e327041161cdc876627921b4a690cae2946580cf0358a8035417f9c0621b4735570e0867171869c1989613a3793c18c65126d18@45.76.35.129:57955") admin.addPeer("enode://9073cc28395f32d7a85cf8a0295a353453dd9e682afca7cd968a4e5b5d660385069ecae0f7026916f0f5dda471284114ae6cb8e16d94c69a8fb49733f0b8aa21@45.76.138.199:57955") admin.addPeer("enode://1d1affca2ea45105897b2fc2de696cb95dd5dd06516db9a088b9d3ba1deefb81b3a7982ef5b728e09251e005af75c9db33ef1969bee0ed4a6df64b4452039be3@45.32.158.190:57955") exit close txt file and rename it (nodes.bat) name could be anything but extention should be (.bat) run the nodes.bat file while dbix wallet running when done then restart the wallet wallet will start syncing good luck I did what you exactly said. I run the nodes.bat and this is the result.  I'm guessing that it's successful? I restarted dbix wallet but I don't see it syncing. Is there some sort display text where it will say its currently syncing? I should've just used livecoin wallet to spare me this. lol paste these lines in your .bat file only not more not less anything. then run bat file gdbix.exe attach admin.addPeer("enode://14a622abe7f93f589b1edca25e52b0a52ac0a2baf1387a197bd44bf5521068bd0c3687d6128afd410eed072b78332ced4ce4a550099b4e76710c9a89ce242088@45.32.65.104:57955") admin.addPeer("enode://39bb1c137d4d53017c39b5db3dd1b1dd8e44f710a2b55e79fdc0a1ebd0f139e6973420b1358f7e40f23eb5630b7605d25529fbac05aabdecdc2cfd4d0d2452d8@45.32.220.235:57955") admin.addPeer("enode://8cda27e3d924155bc8a823b95e327041161cdc876627921b4a690cae2946580cf0358a8035417f9c0621b4735570e0867171869c1989613a3793c18c65126d18@45.76.35.129:57955") admin.addPeer("enode://9073cc28395f32d7a85cf8a0295a353453dd9e682afca7cd968a4e5b5d660385069ecae0f7026916f0f5dda471284114ae6cb8e16d94c69a8fb49733f0b8aa21@45.76.138.199:57955") admin.addPeer("enode://1d1affca2ea45105897b2fc2de696cb95dd5dd06516db9a088b9d3ba1deefb81b3a7982ef5b728e09251e005af75c9db33ef1969bee0ed4a6df64b4452039be3@45.32.158.190:57955") exit Sorry for being a pain zahid but I did everything as you instructed but it's still not syncing. Here,I have recorded in video how i did it. https://www.youtube.com/watch?v=xxZc3ILcG7c&feature=youtu.be |
|
|
|
CAN ANYONE TELL ME PLS HOW I CAN UPDATE MY DBIX COMPUTER WALLET, BECAUSE I INSTALLED IT 2 MONTHS AGO AND SOMEONE TOLD ME THAT IT MUST BE UPDATED, CAN U PLS EXPLAIN WHAT U MEAN BY UPDATE WALLET AND WHY???
dellet the old DbixWall-WinGUIv1.0.1_49-1 from your desktop . download the new DbixWall-WinGUIv1.0.1_49-2. past it in desktop and run it. I dunno with anybody else but simply running the wallet for me doesn't update it. It stays on 0 block even after a day it is open. |
|
|
|
guys help please. How to use the dbix wallet? sexy pool already sent the payout but I still haven't received it in my wallet. It's more than 12hrs now. check your wallet block number what is your wallet current block number if its match with the current block number with clona.ru:3005 block then everything is ok if not then your wallet is not syncing try to add node from gdbix and let your wallet sync and then see your coin will be shown in your wallet My wallet block no is 0. How do I sync it? There's no instructions included in this. Can't find where to sync. ok then i already post this in this thread but again i am posting it do exactly this start your wallet and leave it running then in your dbix wallet folder where gdbix.exe exists make a txt file open it and copy paste these nodes gdbix.exe attach admin.addPeer("enode://14a622abe7f93f589b1edca25e52b0a52ac0a2baf1387a197bd44bf5521068bd0c3687d6128afd410eed072b78332ced4ce4a550099b4e76710c9a89ce242088@45.32.65.104:57955") admin.addPeer("enode://39bb1c137d4d53017c39b5db3dd1b1dd8e44f710a2b55e79fdc0a1ebd0f139e6973420b1358f7e40f23eb5630b7605d25529fbac05aabdecdc2cfd4d0d2452d8@45.32.220.235:57955") admin.addPeer("enode://8cda27e3d924155bc8a823b95e327041161cdc876627921b4a690cae2946580cf0358a8035417f9c0621b4735570e0867171869c1989613a3793c18c65126d18@45.76.35.129:57955") admin.addPeer("enode://9073cc28395f32d7a85cf8a0295a353453dd9e682afca7cd968a4e5b5d660385069ecae0f7026916f0f5dda471284114ae6cb8e16d94c69a8fb49733f0b8aa21@45.76.138.199:57955") admin.addPeer("enode://1d1affca2ea45105897b2fc2de696cb95dd5dd06516db9a088b9d3ba1deefb81b3a7982ef5b728e09251e005af75c9db33ef1969bee0ed4a6df64b4452039be3@45.32.158.190:57955") exit close txt file and rename it (nodes.bat) name could be anything but extention should be (.bat) run the nodes.bat file while dbix wallet running when done then restart the wallet wallet will start syncing good luck I did what you exactly said. I run the nodes.bat and this is the result. I'm guessing that it's successful? I restarted dbix wallet but I don't see it syncing. Is there some sort display text where it will say its currently syncing? I should've just used livecoin wallet to spare me this. lol |
|
|
|
guys help please. How to use the dbix wallet? sexy pool already sent the payout but I still haven't received it in my wallet. It's more than 12hrs now. check your wallet block number what is your wallet current block number if its match with the current block number with clona.ru:3005 block then everything is ok if not then your wallet is not syncing try to add node from gdbix and let your wallet sync and then see your coin will be shown in your wallet My wallet block no is 0. How do I sync it? There's no instructions included in this. Can't find where to sync. |
|
|
|
guys help please. How to use the dbix wallet? sexy pool already sent the payout but I still haven't received it in my wallet. It's more than 12hrs now. |
|
|
|
|
