i just install 60 s9 mining machine and all the light is green(normal) but then the antpool is showing 13 inactive worker. i didnt know why. is that any one facing this issue?

first of all i open the machine and plug the psu. then my internet is 30mbbs connect to 1 router and 4 switch with 16 port. just sometimes the machine is red(facult) but after restart it work back. sometime it just without any light for few minute and work back.

on antpool side that is 13 inactive workers but the machine is work and green lgiht. and many people say i should set ip for each? so that it will work find?

is any one has this experience to install 60 or above mining machine without problem? can you teach me? thx very much really thx

i have a question that dash saying that 'Estimated 19 million coins maximum, with a 7.1% decrease in the number of coins generated per year' and the dash is start at '18 January 2014'.

question 1: so which mean the dash coin will only supply max 7.1% per year and will not more than that? or dash estimated will not much miner mining with dash so put a average of supply in 7.1% but it will be more than?

question 2: and until the next year 18 January 2018 than dash will start the new 7.1% coin supply to the market? which mean right now for antminer D3 with 15GH hasrate, past few day i see the calculator giving me per month 21DASH but today only can get 19DASH with same 15GH hasrate.

question 2(1): if as what i say after 18 January 2018 the new 7.1% coin will generated than with an 15GH hasrate i will get the DASH with more than the amount today the calculator give me?

THANK YOU FOR ANSWER MY QUESTION REALLY THX SO MUCH. this is becasue i have looking for those information but i cant get the answer i want maybe i get confluence. what i get the naswer is after a year 7.1% will keep generated but they didnt mentioned about the DASH mining that we will get is more than today or maybe lower due to block difficulty increase.

slaman29 only viabtc can mine BCC? is that other pool for mining? currently i have 10 s9 mining btc and consider 5 s9 btc, 5 s9 bcc.

hello guys did all of you where to mine BCC? and it is using ASIC or GPU mining? i cant find these information.  thank you very much^^

so actually i found some experience saying that using Stratum Mining Proxy will increase the share accepted and be more stable plus using less internet speed. so is that true?

besides that, if they are many people who connect to my Stratum what are the benefits i will get?  commission?

and to have a Stratum Mining Proxy what do i need? high hasrate? 1-2rig can?

and is that any best Stratum Mining Proxy you are using? can you let me know which are good?

Bibi187 actually i set m.2 to peic already but same problem. but why many people have m2_1 and m2_2 but i only have one?

Bibi187 i have try this just now the result is same only 5 gtx1070 and 2 1060 show up. the last 1060 doesnt show up. haiz.... dont know what to do already sad

Bibi187 i have try to take out the m.2 power and plug back the riser gpu power. then i plug in the 8gpu besides the cpu fan. device manager also doesnt show up the 8gpu. should i take out all and plug back 1 by 1?

i have ready to having 30 mining eth machine in my house. and my house is far from the town the max internet speed is 4mbbs. the upload speed is 0.39mbbs and the download speed is 4mbbs . PING is 89. from speedtest google.

i have do some search on some of the people experience on every machine having 10-40kbbs per second. so if i having 30 machine is that support? or it is too bad? because i havent try yet and people say if ms more than 500 is bad and >2000ms is terrible. right now i having 5 machine and the avg is 100-1200ms depend. when first share accepted is 130 then second gpu accepted share is 3xx then next gpu 5xx. is that normal?

so did any experience miner know about this or who are using 4mbbs to mining with 30machine or more ?? please tell me and share your experience than you very much^^

sorry Bibi187 i have try this just now it doesn't work for me too. just like you say i disconnect the molex power from the riser and the m.2 4pin power keep there. when i switch on the pc the whole pc is black screen and say my bios is gone. then i restart it it didnt show up anything, after i take all the gpu out and left one for display then it back but the whole bios is reset.

then i plug in one by one plus restart. last until the m.2_2 same it doesnt show up anything. have you happend this? black screen and the bios reset.

sorry for long time waiting. because i working oversea until now and just came back. i have try u method but is the same thing only showing up 7gpu. and i have try whether is the riser spoil or what but i use the gpu as display is can work and until the last gpu then all back to 7gpu the 8 is nothing there. i have try all gpu who insert to the m.2 to pcie just besides the cpu fan sure there is nothing show up. and all the risers and card is work just the m.2 place cant detect.

and so sorry my version is 0808 not 0610 BIOS. or maybe is because of the version too new? and i using win10. i have all the pic but i didnt know how to post here.

sorry i dont get what you are talking about so sorry. what is ZEIT?? i cant found the information too.

i have a 6gpu mining machine but actually this machine is share buy. my brother and i buy it to earn money. we mine for eth but after that when the payout is done all the eth will go to my brother wallet and always he say to tranfer to my wallet take some charge so just withdraw it to usd. but i would like to keep it until the price go up and i dont want take the charge. so can i set the address to 2? like pay my brother 70% and i take the 30% everytime when eth payout will automatics pay 70 30. or maybe i view 2 different address in a website when start mining and shared accepted then will divide 70 30 directly??? did anyone know about this?

this few week i saw many people start to selling mining rig(new) to the customer, and those mining machine is take care by the customer itself and electricity too.  before they selling it to the customer they already install all the thing inside and the only thing you need to do is open the pc that all!!!(include your address wallet....all thing)

so come back to the topic. i have ask the seller are you seller in a high price? or the normal market price? they say market price which mean the normal price. and after that he told me when he sell the machine and the customer start mining then they can earn money(commission) from them when ANY ETH ZCASH IS PAYOUT FROM THE POOL.

and the work is open pc then it will start mining and that is no screen no window and others. but the cpu and gpu fan is running.... is anyone know how they do it? to earn commission from the customer. THANK YOU FOR SHARING YOU INFORMATION TO ALL OF US THX^^ 

hi guys! did everyone using TB250-BTC motherboard? and did you using the wake on lan for pc open when you are outstation?

i have saw some tutorial on the google but all in korean word and i didnt understand what they say and just follow. they say open your bios and s5/PME enable then you can use your phone to switch on the pc. but i have try few times it cant open.

can anyone can open their pc using smartphone? can teach me? because due to my job im always outside my house almost a week and nobody take care it. THANK YOU VERY MUCH!!

i upgrade it because after that i can saw the 4g enable button as what online youtube teach me. you mean that right now i have 7gpu active. reinstall the driver directly and shutdown pc, plug in the 8 gpu and open it?

motherboard: PRIME z270-p (before updates to 0610 is 0320)
processor: intel G4400
GPU: 5xGTX1070 3xgtx1060
PSU: AXI-1500 CORSAIR
 RAM: 8GB

i upgrading the bios version to 0610. {4g >enable} > {all to gen1} >{m.2 (only showing one )>PCIE}>{HD>diable} > {fast boot}. i saw many people has M2_1 M2_2 but mine one is just one. after insert one by one until the 8gpu it only show me 7gpu is working. help thank you!!! i have try almost 3day also cant solve this. wanna cry