just wondering if there are any plans to add some new coins to auto exchange. coins like stellar ada ect. something we can't mine but could auto exchage to. first time on here thanks to the devs for this software. just thought it would be nice to see some popular non mineable coins added. sure it would bring you a lot of traffic as well. since i  don't believe anyone currently offers that.

could someone kindly help me. on my swing   wallet. i only get it to sync 98%. i thought i had lost my wallet but bitdefender had removed some files. i restored the files. now i get it to sync to 98% then it reads zero connections and stays that way. any help would be grest thanks

I have my 8tb harddrive hooked up to storij to rent out. A few questions.  It's been hooked up for a month and only 357mb have been stored. I keep getting my time is out of sync even with net time installed and updating ever 30 min. After i did the update on storj program i am getting my port in red now and it's been stuck at 357mb for a week. What all am I doing wrong. How do I get everything working right. Also never received any payment.  Use my ether wallet that storj has as a recommendation to use. I know it takes a month but it's been over a month and nothing. Could someone help me even if i have to start all over. Just trying to get it to all work. I think it's a good ideal that will go somewhere in the future. .

Anyone know any tips. When you get timeout error. Minner connects to stratum. Then just times out and will not start minning. Can add screen shoot later. Been trying to get this minner to work for a week now with ubiq pool. I am so close lol. Sorry i am pretty new. I have used other miners. This one just does not seen to like me. Any help would be appreciated.  Thank you in advance

Ok so i will keep trying ubiq pool.  Been messing around with it for days. Can't get it to work. Using claymore.  Finally got the stratum to connect. Now it connects then just says timeout. Anyone have any tips for that?

Good pool that is paying and working.  I tried ubiq pool. I would just get stratum not connecting error.  Tried us and eu and use and eu2. Any other pool you all would suggest

first wanted to say thanks to the members that  pointed me in the right direction. now i can't seem to connect to stratum.

NVIDIA Cards available: 2
CUDA Driver Version/Runtime Version: 9.0/8.0
GPU #0: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1

GPU #1: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1

Total cards: 2
ETH: Stratum - connecting to 'us.ubiqpool.io' <45.76.9.36> port 8008
ETH: Stratum - Cannot connect to us.ubiqpool.io:8008
ETH: Stratum - Failed to connect, retry in 20 sec...
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MININ MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
"-allcoins" option is set, default pools will be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ETH: Stratum - connecting to 'us.ubiqpool.io' <45.76.9.36> port 8008
ETH: Stratum - Cannot connect to us.ubiqpool.io:8008
ETH: Stratum - Failed to connect, retry in 20 sec...



my bat file.
GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool stratum+tcp://us.ubiqpool.io:8008 -ewal 0xe7F0F0dd64B618042AB58F52D31777a48D01200  -epsw x -eworker upst -allpools 1 -allcoins 1
 did i do somthing wrong or is this pool just not working. thanks for the help again. i am still learning and appreciate evthing

Could someone help me please.  Trying to figure out why I keep getting  this.



D:\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.3>EthDcrMiner64.exe -epool stratum+tcp://us.ubiqpool.io:8008 -ewal 0xe7F0F0dd64B618042AB58F52D31777a48D012050 -epsw x -eworker rig1
'EthDcrMiner64.exe' is not recognized as an internal or external command,
operable program or batch file.

Those files are under the Cuda folders in claymore folder. So i need to move them out of there into the file list that has the bat file correct.  I tried right before work. Said I didn't have permissions.  Have to try again after work

ok i added the pause and this is  what it is saying.


D:\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.3>EthDcrMiner64.exe -epool stratum+tcp://us.ubiqpool.io:8008 -ewal 0xe7F0F0dd64B618042AB58F52D31777a48D012050 -epsw x -eworker rig1
'EthDcrMiner64.exe' is not recognized as an internal or external command,
operable program or batch file.



is this because i have the claymore saved to my d: drive and not my main c: drive

So i tried to start to mine ubiq. I am using the ubiq pool and claymore.  I copied the bat from ubiq pool and added wallet address and the lines you need for nivida cards. When i go to open the bat file. The command window opens and shuts super fast. I don't even have time to see what it says. Any help would be greatly appreciated. Still kinda new to minning learning the ropes. Maybe i missed something.  Also tried a bat file from a guy on youtube. Does the same thing. What am I doing wrong. I set virtual memory to 16000 as it says to do in the read mefile as well as restarted the rig. Thanks to anyone that can point me in the right direction.

mother board is asus prime z 270-ar
gpu is msi gtx1070  gaming x 8g  three of them.
riser is new red ones with sata power. model numbe pcie64p-no-88 ver088-sata.
2 cards are on the board one is plugged into gpu 2 slot on board 1x16 using riser

Posted From bitcointalk.org Android App

 

Posted From bitcointalk.org Android App

why after about a hr minning chc do i get a whole bunch of Stratum connection interrupted still it eventually stops. was working fine about 3 days ago now i get this all the time

Having a issue with afterburner showing  all my gpu .  It was working fine when I had all 3 cards on the mother board. when i put a card on a riser. it no longer showed that card but all 3 cards would work in my minning software. if i linked all the cards together in afterburner it would change the fan speed of all three together.  just won't show 3rd card. tried moving from pcie to the 16 that the card was in on the mother board. same results.  anyone have a fix for this.

Posted From bitcointalk.org Android App

has anyone tried electrical cleaner. just a thought. I just built my first rig a few weeks back. also as far as your air compressor and water. you need to install a in line water filter. I think that is the name of it. basically it collects the water so you don't have condensation.

Posted From bitcointalk.org Android App