I'm not sure why I'm even posting this, clearly reading and understanding are not high on some peoples skills list:

you can find this on the MAIN PAGE OF THE POOL.

This is NOT a solo mining pool. All mining is pegged to exchange prices.

You can also use any valid wallet address from any of the coins we mine. This feature has had minimal testing so use at your own risk

If a coin is NOT listed on the pool (except BTC) and you still choose to mine with that address, you risk not getting any payments.

Non-BTC payouts depend on that coin being mined as your BTC balance is traded internally by our system to your currency of choice. If we have not or are not mining that currency your payouts will be delayed until the pool has mined the blocks for you to get paid. If you notice in the pools status that the currency is red, it means there is not sufficient amount of the currency to pay miner(s). It's recommended to use BTC as any other coin could be removed at anytime and payouts will not occur.

YOU MUST ALWAYS set your currency in your password field: c=<SYMBOL>. The pool has mined hundreds of different coins and many have the same address version. We CAN NOT read your mind and possible know what currency you want. If no c=<SYMBOL> is set, your currency will be randomly chosen from any matching coins we have used. This HAS TO BE A REAL EXCHANGE SYMBOL. Do not use a symbol that has an <ALGO> added. Such as XVG-blake2s or AUR-sha or DGB-skein, these are ALL WRONG. These are used only for the pool to support multi-algo coins.

c=<SYMBOL> doesn't always work. However, if you fail to correct this and/or continue mining with the wrong currency detected you will NOT be able to change to the proper currency once an actual balance has been posted to the address. Do not log a support ticket asking to convert your balance, they'll be closed.

Same here, I have it configured c=XVG also and display as UNO, so I thought zpool is paying out UNO only, thus need a UNO's address. Ran 8 rigs overnight with UNO address and not a single pennies UNO payout yet.
https://www.zpool.ca/?address=ubjryFxSQ5AEVpusKziN9ifz1L2Hx2dSze   (UNO).
I probably switch back to supr for now until this is resolved.  

Hi guys, i'm building new rig with 8 x EVGA GeForce GTX 1070 SC GAMING ACX 3.0 Black Edition and i have 2 Corsair HX1000i psu's.
I'm wondering what is the proper way to connect the psu's. I'm using add2psu to connect the 2 psu's.
First psu will power the motherboard, cpu, ssd, 4 raisers and the 4 cards connected to them.
Second psu will power other 4 raisers and the 4 cards that are connected to them.

Is this right?

Because i read somewhere that the first PSU have to power all the raiser+mobo+cpu and ssd, but this way i will not have enough connectors to do it.

Please, give me some advice!

Hello,

I have a problem mining XVG on this pool , I tried blake2s and x17 with ccminer but not matter how I modify the command line in miner on the pool is still showing that my wallet is set to Unobtanium , what can I do to change it to XVG ? My line looks like this "ccminer -i 21 -a x17 -o stratum+tcp://x17.mine.zpool.ca:3737 -u wallet -p c=XVG"

Thx

Sp mod 3 has worked much better than this as per trending.
I cant speak to it being most stable but is better than krnlx (yields are consisitently higher but reported hashrate is lower. I get better yields by using a lower intensity on the sp3 mod also) .

I'm currently planning to start a large mining operation (not super large).
But I am considering should I buy a house or rent some place or even rent like a store front to store mining rigs?
As I understand it, houses probably have 200 amp circuit panels. Most circuits use 15 amp. So does this mean each circuit panel can only handle about 13 circuits running at ~80% load meaning about 13 mining rigs per 200 amp circuit panel?

Am I able to call electric company or electrician to install new 200 amp circuit panels and if so is there a limit?

I would like to just use 1 house. I may just buy a cheap house and use it mainly for mining purposes.

Also another idea I had was to just get a shed to save on cost. Am I able to install 200 amp circuit panels in the shed?

Nope, its gone from that site.

This one is completely bogus.  The source is just krlnx source with no modifications.  It is CUDA 8 not CUDA 7.5 as claimed.  The VT scan is not typical results of ccminer.  Download a version from links from ccminer.org and scan one of those on VT and see the difference.  Those don't have win32.malware-gen or Trojan.gen2 results.  But hey, use it if you want.

I don't believe there is such a stupid person in this forum, who will download miner shared by a newbie. But who knows...

C:\Users\user\Downloads\PortableGit\ccminer-skunk-krnlx\ccminer.vcxproj : error  : Unable to read the project file "ccminer.vcxproj".
C:\Users\user\Downloads\PortableGit\ccminer-skunk-krnlx\ccminer.vcxproj(42,5): The imported project "C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\V120\BuildCustomizations\CUDA 8.0.props" was not found. Confirm that the path in the <Import> declaration is correct, and that the file exists on disk.

Is the above error I get.

Any available version for windows 10?