Latest posts of: playforcrypto

Show Posts
Pages: [1]

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN] 1337 [MANDATORY UPDATE] 20.89% APR | POS ONLY

on: November 22, 2017, 01:46:53 PM

Quote from: rataplannetje69 on November 22, 2017, 12:46:15 AM otherwise i played some games on https://playforcrypto.com/ and earned some 1337 coins worth nothing but thanks of this nice old game i have more money than 1 year ago. You can earn up to 30% more by playing every day. Every consecutive day you play increases your daily play bonus by 1% up to 30%. Also 1337 used to have a lot higher payout rate but Velvet78 stopped sending coins for snake payouts so the payout rate was reduced by a lot. You're welcome, don't spend it all in one place now

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN] 1337 [MANDATORY UPDATE] 20.89% APR| POS ONLY

on: October 24, 2017, 09:16:53 PM

Quote from: Nuad on October 24, 2017, 05:23:36 PM Finally! Thank you I can withdraw from cryptopia now. Question Dev, Play for Crypto will update its platform on nov 1st apparently. Do you know if the snake game will be replaced to new ones? No, there will only be the snake game. I do have plans on new games that will be faucets but those wont be for awhile.

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN] 1337 [MANDATORY UPDATE] 41.78% APR| POS ONLY

on: September 25, 2017, 12:14:45 AM

Quote from: Leass on September 24, 2017, 11:54:53 PM Quote from: playforcrypto on September 24, 2017, 11:49:23 PM Quote from: Leass on September 24, 2017, 09:48:47 PM Quote from: playforcrypto on September 24, 2017, 09:27:53 PM Quote from: Leass on September 24, 2017, 09:16:42 PM Quote from: playforcrypto on September 24, 2017, 09:09:34 PM Quote from: Nordak01 on September 24, 2017, 08:56:36 PM Console commands worked 1º Old wallet I used the command dumpprivkey <1337address> 2º New wallet I used the command importprivkey <1337privkey> [label] I dont understand The address has been transferred but my balance is at 0? some command to update the balance? oops I forgot. I think you need to run wallet with -rescan after importing address. If on windows create a shortcut for the 1337-qt.exe and edit the properties of the shortcut and find where it says "Target" add -rescan after the path to the 1337-qt.exe Ok, after that it run for few whiles then stop responding and crashed. Can't open it normally now, acting like before when i switch wallet.dat to old one. It will become unresponsive but you need to let it run for awhile. -rescan scans all blocks downloaded so it can take awhile. Quote from: cgt99 on September 24, 2017, 09:27:45 PM old wallet.dat cant be used with new wallet 1.9.0.0 - instant crash. using importprivkey also crashes even with -rescan Open the old wallet and export your private keys. Then in new wallet use the importprivkey and wait awhile. It may become unresponsive but just let it sit. It took about 2 minutes for me to import a address. Well, I can't get to GUI when rescaning, Splash shows "Reading addresses" and then crashes. Addresses were imported to wallet by importprivkey, then wallet restarted and opened by shortcut with -rescan, now it shut down wallet when rescan finishes and leave it inaccessible for next lunch with nornall icon or shortcut :/ Hmm did your wallet crash while it was importing the private key? It sounds like the wallet.dat for new wallet got corrupted. I was able to import 1 private key then rescan and it worked but when I tried importing my wallet dump file it crashed after 1 hour and 30 minutes and now wallet crashes before GUI is shown. Yup, got crash after importing 2nd priv key, then did restart and load another two with crash. After restart all 4 imported+one new addresses were present but with 0 balance. I've got same issue as You when I've tried -rescan. Right now we need to wait for dev response until we're hopless I guess on Windows :x Hmm yeah I think the only thing we can do is wait for xenonflux to release a fix for it then. In the mean time I will keep messing with it and see if I can get it working.

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN] 1337 [MANDATORY UPDATE] 41.78% APR| POS ONLY

on: September 24, 2017, 11:49:23 PM

Quote from: Leass on September 24, 2017, 09:48:47 PM Quote from: playforcrypto on September 24, 2017, 09:27:53 PM Quote from: Leass on September 24, 2017, 09:16:42 PM Quote from: playforcrypto on September 24, 2017, 09:09:34 PM Quote from: Nordak01 on September 24, 2017, 08:56:36 PM Console commands worked 1º Old wallet I used the command dumpprivkey <1337address> 2º New wallet I used the command importprivkey <1337privkey> [label] I dont understand The address has been transferred but my balance is at 0? some command to update the balance? oops I forgot. I think you need to run wallet with -rescan after importing address. If on windows create a shortcut for the 1337-qt.exe and edit the properties of the shortcut and find where it says "Target" add -rescan after the path to the 1337-qt.exe Ok, after that it run for few whiles then stop responding and crashed. Can't open it normally now, acting like before when i switch wallet.dat to old one. It will become unresponsive but you need to let it run for awhile. -rescan scans all blocks downloaded so it can take awhile. Quote from: cgt99 on September 24, 2017, 09:27:45 PM old wallet.dat cant be used with new wallet 1.9.0.0 - instant crash. using importprivkey also crashes even with -rescan Open the old wallet and export your private keys. Then in new wallet use the importprivkey and wait awhile. It may become unresponsive but just let it sit. It took about 2 minutes for me to import a address. Well, I can't get to GUI when rescaning, Splash shows "Reading addresses" and then crashes. Addresses were imported to wallet by importprivkey, then wallet restarted and opened by shortcut with -rescan, now it shut down wallet when rescan finishes and leave it inaccessible for next lunch with nornall icon or shortcut :/ Hmm did your wallet crash while it was importing the private key? It sounds like the wallet.dat for new wallet got corrupted. I was able to import 1 private key then rescan and it worked but when I tried importing my wallet dump file it crashed after 1 hour and 30 minutes and now wallet crashes before GUI is shown. Edit- I'm going trying splitting my wallet dump into multiple files since it has like 10k addresses to import.

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN] 1337 [MANDATORY UPDATE] 41.78% APR| POS ONLY

on: September 24, 2017, 09:27:53 PM

Quote from: Leass on September 24, 2017, 09:16:42 PM Quote from: playforcrypto on September 24, 2017, 09:09:34 PM Quote from: Nordak01 on September 24, 2017, 08:56:36 PM Console commands worked 1º Old wallet I used the command dumpprivkey <1337address> 2º New wallet I used the command importprivkey <1337privkey> [label] I dont understand The address has been transferred but my balance is at 0? some command to update the balance? oops I forgot. I think you need to run wallet with -rescan after importing address. If on windows create a shortcut for the 1337-qt.exe and edit the properties of the shortcut and find where it says "Target" add -rescan after the path to the 1337-qt.exe Ok, after that it run for few whiles then stop responding and crashed. Can't open it normally now, acting like before when i switch wallet.dat to old one. It will become unresponsive but you need to let it run for awhile. -rescan scans all blocks downloaded so it can take awhile. Quote from: cgt99 on September 24, 2017, 09:27:45 PM old wallet.dat cant be used with new wallet 1.9.0.0 - instant crash. using importprivkey also crashes even with -rescan Open the old wallet and export your private keys. Then in new wallet use the importprivkey and wait awhile. It may become unresponsive but just let it sit. It took about 2 minutes for me to import a address.

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN] 1337 [MANDATORY UPDATE] 41.78% APR| POS ONLY

on: September 24, 2017, 09:09:34 PM

Quote from: Nordak01 on September 24, 2017, 08:56:36 PM Console commands worked 1º Old wallet I used the command dumpprivkey <1337address> 2º New wallet I used the command importprivkey <1337privkey> [label] I dont understand The address has been transferred but my balance is at 0? some command to update the balance? oops I forgot. I think you need to run wallet with -rescan after importing address. If on windows create a shortcut for the 1337-qt.exe and edit the properties of the shortcut and find where it says "Target" add -rescan after the path to the 1337-qt.exe

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN] 1337 [MANDATORY UPDATE] 41.78% APR| POS ONLY

on: September 24, 2017, 08:26:08 PM

Quote from: Leass on September 24, 2017, 08:16:38 PM Quote from: xenonflux on September 24, 2017, 07:52:25 PM I am still working on few things. Everything is working fine on linux. If you're linux user and are stuck behind, please use the bootstrap from here https://github.com/Velvet78/1337/releases/tag/v1.9.0.0 ..Windows users can use the bootstrap as well...i am still verifying few things on windows..stay tuned. In my case it still crashing when using bootstrap with old wallet.dat, when I delete it from Roaming folder it goes through but i can't import old wallet. In console I've got "Cannot open wallet dump file (code -8)". The bootstrap is to sync faster. It is all blocks up to when the bootstrap was created. If it can't import the wallet dump file you may need to import each address manually with the importprivkey command. The importprivkey command works for me.

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN] 1337 [MANDATORY UPDATE] 41.78% APR| POS ONLY

on: September 24, 2017, 08:04:57 PM

Quote from: Nordak01 on September 24, 2017, 07:41:20 PM Quote from: playforcrypto on September 24, 2017, 07:30:40 PM Quote from: Nordak01 on September 24, 2017, 07:13:52 PM Hello everyone I have a problem 1º Backup my wallet 2º I Copy 1337 folder C: / Users / <your username> / AppData / Roaming to my Desktop 3º I copied the wallet.dat from C: / Users / <your username> / AppData / Roaming I deleted everything ... 4º I installed the new wallet and erased the created wallet.dat and put the old wallet.dat I run the new wallet .... result ... give me error .... what am I doing wrong ____________________________________________________________________ If not copy the old WALLET.DAT and leave the new WALLET.DAT created the wallet works but I get without the coins and with new adress ... it does not interest to be left with nothing Even though I copied everything and managed to put the old version and it was as it was before (I recovered everything but I have the old wallet) Does anyone explain how I put the new version without losing the coins? I need help, please I haven't tried yet but you can probably export your private keys using the old wallet then use the new wallet and import the private keys. If you still do not try it, it's better to try, but I recommend copying everything to go back to the old version if it does not work Maybe need a video on youtube to help newbies command on the console: importwallet <filename> or importprivkey <1337privkey> [label] How do you export/import? Do you need to encrypt the wallet to do this? To export a individual address you can use the console command "dumpprivkey <address>". Or to dump the whole wallet you can use the command "dumpwallet <filename>" To import it you can use either of those console commands you listed above. Quote from: Nordak01 on September 24, 2017, 07:57:37 PM Quote from: xenonflux on September 24, 2017, 07:52:25 PM I am still working on few things. Everything is working fine on linux. If you're linux user and are stuck behind, please use the bootstrap from here https://github.com/Velvet78/1337/releases/tag/v1.9.0.0 ..Windows users can use the bootstrap as well...i am still verifying few things on windows..stay tuned. What is the bootstrap? How do I use bootstrap? I'm a Windows user. 1. Download the snapshot from above. 2. Make a back up of your wallet.dat 3. Delete everything in the 1337 folder except your wallet.dat 4. extract all the files and folders from the zip file to your 1337 folder 5. Start the wallet and it will use the bootstrap/snapshot

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN] 1337 [MANDATORY UPDATE] 41.78% APR| POS ONLY

on: September 24, 2017, 07:30:40 PM

Quote from: Nordak01 on September 24, 2017, 07:13:52 PM Hello everyone I have a problem 1º Backup my wallet 2º I Copy 1337 folder C: / Users / <your username> / AppData / Roaming to my Desktop 3º I copied the wallet.dat from C: / Users / <your username> / AppData / Roaming I deleted everything ... 4º I installed the new wallet and erased the created wallet.dat and put the old wallet.dat I run the new wallet .... result ... give me error .... what am I doing wrong ____________________________________________________________________ If not copy the old WALLET.DAT and leave the new WALLET.DAT created the wallet works but I get without the coins and with new adress ... it does not interest to be left with nothing Even though I copied everything and managed to put the old version and it was as it was before (I recovered everything but I have the old wallet) Does anyone explain how I put the new version without losing the coins? I need help, please I haven't tried yet but you can probably export your private keys using the old wallet then use the new wallet and import the private keys.

Alternate cryptocurrencies / Announcements (Altcoins) / Re: ★FlappyCoin★BLOCK REWARD@ 50K..opps LIMITED TIME★Raising★Mine@ Flappy Pool★

on: August 18, 2017, 06:57:48 PM

You can now earn FlappyCoin by playing Snake https://playforcrypto.com/

Pages: [1]