Latest posts of: crisandi

Show Posts
Pages: [1]

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN] [POW+MN+POS] ROVER COIN [ROE] INVITE BOUNTY [AUCTION] 12th March 21.00 UTC

on: March 13, 2018, 10:56:57 AM

Not a single discord link is working, really that hard to make one that doesn't expire?

Alternate cryptocurrencies / Mining (Altcoins) / Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System

on: March 01, 2018, 11:52:13 AM

hello, I have a question, Will you add the newest ccminer so we can mine most of the new coins that appear?

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN][NIHL][NO ICO][MASTERNODES] NIHILO COIN

on: February 22, 2018, 02:59:54 PM

I have a quick question I bought some coins on crypto-bridge to check if I could start a masternode but when I transferred the coin to my windows wallet the coins are unconfirmed and still in pending after about 1-2 hours of waiting. Also, I cannot find my windows wallet or exchange wallet on the explorer. Any ideea what this might be, or the coin/wallet are dead? Thank you

Alternate cryptocurrencies / Mining (Altcoins) / Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System

on: January 22, 2018, 10:22:56 PM

Quote from: tekmobile on January 22, 2018, 06:19:20 PM Quote from: crisandi on January 22, 2018, 02:36:52 PM Something is happening with one of my rigs. SMOS doesn't want to recognise it anymore, no matter what I do, rewrite the program, change the pools, this rig starts, I can see it working, just SMOS doesn't see it so i cannot configure the pools and everything. I think I should just get back to using windows, at least the rig worked after I restarted it and I didn't have to try to guess everytime what's wrong. What might be the problem? Maybe a bad USB drive ive had a few go on me that started to fail to boot reflashed and it was ok for a bit then same again so I replaced it and it's been working since They were not cheapo no name ones either they were decent USB3 sandisk sticks if SMOS is writing to the drive quite a bit then I guess they can fail in time flash memory only has limited write cycles Thank you, I am also using quite good corsair usb, I will try to buy new ones and test again

Alternate cryptocurrencies / Mining (Altcoins) / Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System

on: January 22, 2018, 02:44:20 PM

Quote from: pinoycash on January 22, 2018, 02:41:56 PM Quote from: crisandi on January 22, 2018, 02:36:52 PM Something is happening with one of my rigs. SMOS doesn't want to recognise it anymore, no matter what I do, rewrite the program, change the pools, this rig starts, I can see it working, just SMOS doesn't see it so i cannot configure the pools and everything. I think I should just get back to using windows, at least the rig worked after I restarted it and I didn't have to try to guess everytime what's wrong. What might be the problem? Check your Configuration file, Check if your SMOS email is added instead of the default one. --- @dev I want to ask if a new neoscrypt miner for nividia will be added in SMOS? Since equihash Coins is taking a red hit now, i want to mine some neoscrypt for the time being. It is, I'm not that stupid though. Sometimes the rig comes back with 5 Gpu's instead of 6 and now I can't see it at all

Alternate cryptocurrencies / Mining (Altcoins) / Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System

on: January 22, 2018, 02:36:52 PM

Something is happening with one of my rigs. SMOS doesn't want to recognise it anymore, no matter what I do, rewrite the program, change the pools, this rig starts, I can see it working, just SMOS doesn't see it so i cannot configure the pools and everything. I think I should just get back to using windows, at least the rig worked after I restarted it and I didn't have to try to guess everytime what's wrong. What might be the problem?

Alternate cryptocurrencies / Mining (Altcoins) / Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System

on: January 12, 2018, 12:02:14 PM

Quote from: tytanick on January 11, 2018, 11:00:14 PM Quote from: dian.romanov on January 11, 2018, 09:03:24 PM So this is a bot that has sneaked into your distro, it's not that you programmed it .... I apologize if so, I will reinstall this iso when I can 0 and verify if it is true ... I will change port 22 of the SSH and the password of the user miner. It is possible that someone has sneaked. Thank you for the clarification and sorry if I have disrespected you. You can be certain one thing. I will never without user permission take hashpower or redirect or steal. Cash isn't for me as important as my clear name and honesty. So this You can be sure but there are hackers everywhere in the world and trying to destroy everything ... So i am familiar with this case that bots are scannin 22 ports in internet becasue i seen this before. I even sent 2-3 weeks ago email to users that i saw were hacked. I did the same today also sent few emails. It was about 15 people with this problem and i am sure that it is becasue 22 port was forwarded. I always ask for this and the answer is always positive. In one case few rigs had DHCP which was assigning PUBLIC (external) ip addreses so the port 22 didnt need to be forwarded as it was already opened to world... I will write somewere on my website to no to forward 22 port as the login and password are well known to users. The login and password was once protected by me and i didnt give it to anyone ... But people demanded to give them access to their rigs so i did that. Also even if i would be stupid and greedy enough to steam users hashpower then it would be the stupidest thing to do. Its better to sell devices which i am selling from a year and the demand is pretty nice than destroy this by taking hashpower. So i see ofcourse why are You mad but you just could ask me about this Also some people doesnt understand that there is devfee in claymore but i have nothing to do with this and it is miner developer fee. Ofcourse i could capture this fee by using some known to me technique but it would be just stealing which i am not capable of. Can You please also confirm if you forwarded 22 port to Your rig or assigned External public ip address ? I am always analysing all cases. Hello, could you please pm me and explain what the forward of port 22 is and how can i change that please, because I cannot send a pm. One of my gpu also disappeared and until now I Tried to see if it's a hardware problem. Thank you

Alternate cryptocurrencies / Mining (Altcoins) / Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System

on: January 10, 2018, 02:44:45 PM

Quote from: lmannyr on January 10, 2018, 02:31:01 PM Quote from: crisandi on January 10, 2018, 02:10:37 PM Hello, I just started using this and I have to say that I really enjoy it and I believe that I will move all my rigs on your operating system. I have just one thing that I don't understand. I started my 6 GTX 1080Ti and it worked on the first try, all 6 gpu's were showing and the mining speed was above windows, so I shut it down and placed it back on the shelf and now I get " No screen session found.", miner doesn't work only if i restart the rig and it only detects 5 GPU's . ( Didn't change anything, just placed it on a shelf, all risers and cables are ok, the rig is not connected to any screen, the 6th gpu starts but the miner doesn't see it) What could be the problem? Thank you . If it was working before you physically moved it, then it's not an SMOS issue. Sounds to me you need to recheck your power connection. May want to remove GPU one by one then restarting in between to isolate which card is the issue. Then you can further replace riser check it's cables etc.... risers are a known problem. Bad QC. Ok thank you, I will try and see if it works

Alternate cryptocurrencies / Mining (Altcoins) / Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System

on: January 10, 2018, 02:10:37 PM

Hello, I just started using this and I have to say that I really enjoy it and I believe that I will move all my rigs on your operating system. I have just one thing that I don't understand. I started my 6 GTX 1080Ti and it worked on the first try, all 6 gpu's were showing and the mining speed was above windows, so I shut it down and placed it back on the shelf and now I get " No screen session found.", miner doesn't work only if i restart the rig and it only detects 5 GPU's . ( Didn't change anything, just placed it on a shelf, all risers and cables are ok, the rig is not connected to any screen, the 6th gpu starts but the miner doesn't see it) What could be the problem? Thank you .

Pages: [1]