Latest posts of: shatter

Show Posts
Pages: [1] 2 »

Alternate cryptocurrencies / Altcoin Discussion / Re: [ANN][CNC][Pool][PPLNS] WeMineCNC.com | Stratum | DDoS Protection!!

on: May 11, 2013, 09:02:39 PM

In my opinion its not perfect right now. Sometimes the "last 10 blocks found" are vanishing partly from time to time. Just a minute before was a block with 1 confirmation left one with 17 and 19. Right now its only shown 5 that are already completed so i am asking myself what will happen to the 2 that were not confirmed yet? The one with 1 confirmation left was paid. Any ideas? Ok 3 times down in a row now and 45 shares lost :/ site offline... Another 3 disconnects pool not responding. Is there trouble with something? The pool hasnt been down this many times in a row.

Alternate cryptocurrencies / Altcoin Discussion / CHN CNC Pool

on: May 08, 2013, 06:32:17 PM

I lately tested this after some pools that just were DDOSed. 2% fee http://www.weminecnc.com/index Not my pool, just like the Style and the overview etc.

Alternate cryptocurrencies / Altcoin Discussion / Re: 7970 HIS Reference on LTC ... what hash are you getting?

on: May 06, 2013, 06:42:11 PM

Thanks for the info about the card flashing. Do you have the non GHZ Version of the HIS Card ? HD 7970 x2 basic 925 GPU and 1375 memory by factory settings. Mine is the none GHz Edition but it is already stable running at 1100 GPU and 1725 memory. If you tell me you had this card flashed with the bios you found i will try it. I am little scared about the card you know Cheesy?! Thx. If it works i could send you some LTC or FTC i dont have BTC at all. Kind regards Patrick

Alternate cryptocurrencies / Altcoin Discussion / Re: HIS 7970 IceQ X² 3GB Can't get over 600KH/s

on: May 06, 2013, 06:41:50 PM

Thanks for the info about the card flashing. Do you have the non GHZ Version of the HIS Card ? HD 7970 x2 basic 925 GPU and 1375 memory by factory settings. Mine is the none GHz Edition but it is already stable running at 1100 GPU and 1725 memory. If you tell me you had this card flashed with the bios you found i will try it. I am little scared about the card you know Cheesy?! Thx. If it works i could send you some LTC or FTC i dont have BTC at all. Kind regards Patrick

Alternate cryptocurrencies / Altcoin Discussion / Re: [ANN][CNC CHNCoin - P2Pool] http://94.254.0.242:8800 , 1% fee , fast, EU based.

on: May 06, 2013, 04:27:25 PM

Ok found the wallet. cgminer.exe -o stratum+tcp:http://94.254.0.242:8800 -u PAYOUT_ADRESS -p x ?? and the rest of the settings --scrypt included?

Alternate cryptocurrencies / Altcoin Discussion / Re: 7970 HIS Reference on LTC ... what hash are you getting?

on: May 05, 2013, 04:37:27 PM

Sounds really good, how did you do it? Can you describe it for the HIS 7970 x2 card? And which driver are you using ?

Alternate cryptocurrencies / Altcoin Discussion / Re: 7970 HIS Reference on LTC ... what hash are you getting?

on: May 05, 2013, 01:19:02 PM

you flashed the gigabyte bios on the his card ?! But when its not stable it is not working in my opinion ...

Alternate cryptocurrencies / Altcoin Discussion / Re: HIS 7970 IceQ X² 3GB Can't get over 600KH/s

on: May 04, 2013, 11:08:12 PM

Quote from: notaek on May 04, 2013, 09:36:36 PM Quote from: SubNoize on May 04, 2013, 09:37:49 AM I have tried everything, 100 different launch configs and overclocking all the way from 925 to 1200 core clock and 1375 memory clock to 1800 but i can't get over 580kh/s. cgminer and reaper, it doesn't make a difference. SDK 2.8 with drivers 13.3 beta 3, 13.4 and 13.5 beta 2 drivers. Nothing seems to make much of a difference. I use drivers 13.1 and I am getting 650 kh/s no problem. It seems like it is a driver problem, if you are overclocking so high you should be getting higher speeds. Quote from: shatter on May 04, 2013, 09:05:00 PM Got this card today too. The funny part is that cgminer is showing me around 500 Khs the pool shows around 600... You are experience variance. Although your card is actually mining at 500khs, the pool perceives you as mining at 600 because for a certain duration of time you are solving shares a little more quickly. It all evens out though, there will be some times when you are only mining at 400khs on the pool. Thanks for your answer. Is it possible to post your cgminer configuration ? The settings you are starting cgminer with? Thanks

Alternate cryptocurrencies / Altcoin Discussion / Re: HIS 7970 IceQ X² 3GB Can't get over 600KH/s

on: May 04, 2013, 09:05:00 PM

Got this card today too. The funny part is that cgminer is showing me around 500 Khs the pool shows around 600...

Alternate cryptocurrencies / Altcoin Discussion / Re: feathercoin pool(100M+)

on: May 04, 2013, 06:41:00 PM

YOUR POOL GETS HACKED AGAIN I GUESS !!!!!!!!! Someone added this : 6rAFm9Hx9KD8aL54cKBZyCeXv7dtCVEyZg as wallet adress and 222.22 payout Whats going on again ? My wallet adress was taken!

Bitcoin / Mining software (miners) / Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.1.0

on: May 04, 2013, 06:28:31 PM

Quote from: shatter on May 04, 2013, 05:17:02 PM Quote from: Schleicher on May 04, 2013, 05:06:12 PM Quote from: shatter on May 04, 2013, 05:03:17 PM I tried to setup cgminer 3.1.0 with the simpliest settings cgminer.exe -o http://pool:port -u username -p password -scrypt Try --scrypt instead of -scrypt I AM AN IDIOT! i think i can figure it out an post the result here. ok something was messed up with the driver installation. Iam getting "only" 550 khs right now. I need now to find out how to implement a config file into all this and which settings for the card to put in

Bitcoin / Mining software (miners) / Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.1.0

on: May 04, 2013, 05:17:02 PM

Quote from: Schleicher on May 04, 2013, 05:06:12 PM Quote from: shatter on May 04, 2013, 05:03:17 PM I tried to setup cgminer 3.1.0 with the simpliest settings cgminer.exe -o http://pool:port -u username -p password -scrypt Try --scrypt instead of -scrypt I AM AN IDIOT! i think i can figure it out an post the result here.

Bitcoin / Mining software (miners) / Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.1.0

on: May 04, 2013, 05:03:17 PM

Having big problems with cgminer 3.1.0 on windows 7 64 bit. Using HIS HD 7970 x2 with catalyst driver 13.1 Direct 3D 9.14.10.0945 OpenGL 6.14.10.12002 I tried to setup cgminer 3.1.0 with the simpliest settings cgminer.exe -o http://pool:port -u username -p password -scrypt Cgminer directly crashes with the windows screen, that the programm is not working any more. I have absolutely no idea what i can do :/ The HIS control center is installed too, should i deinstall? I recently changed from nvidia to Ati card.

Alternate cryptocurrencies / Altcoin Discussion / Re: feathercoin pool(100M+)

on: May 02, 2013, 08:56:27 PM

automatic payment works for me now.

Alternate cryptocurrencies / Altcoin Discussion / Re: feathercoin pool(100M+)

on: May 01, 2013, 01:42:11 PM

tahnk you, i will test this later .

Alternate cryptocurrencies / Altcoin Discussion / Re: feathercoin pool(100M+)

on: May 01, 2013, 12:33:34 PM

can me help someone with the configuration of cgminer settings for a ATI 6970 cgminer -o http://fc.ltcoin.net:6666 -O username -p x i guess its working but i get always rejected from the pool.

Alternate cryptocurrencies / Mining (Altcoins) / Re: [ANN] cudaMiner - a new litecoin mining application [Windows/Linux]

on: May 01, 2013, 11:27:37 AM

Quote from: yakka34 on May 01, 2013, 11:21:18 AM Quote from: cbuchner1 on May 01, 2013, 10:59:50 AM Quote from: shatter on May 01, 2013, 10:55:08 AM -l S49x4 got me to 170 khash+ a few postings up, someone said he would get 185 kHash on GTX 670 with this. -l S56x4 -C 1 I only got 178kh/s with those.Mine flags -C 2 -i 0 -l S112x2 gives me 182-185kh/s. I've also added these flags to comparisons spreadsheet. Nice one! Thanks coming close to 180 now

Alternate cryptocurrencies / Altcoin Discussion / Re: feathercoin pool(100M+)

on: May 01, 2013, 11:16:52 AM

strange after some time i am able to lock my wallet in there again. He answered me too in a PM like "will be back soon" about a question wih the payment. Strange. Dont know if he has some serious issues with the systems or it will turn out as a scam i will mine the last 3 FC needed to have 20+ and then stop

Alternate cryptocurrencies / Mining (Altcoins) / Re: [ANN] cudaMiner - a new litecoin mining application [Windows/Linux]

on: May 01, 2013, 10:55:08 AM

-l S49x4 got me to 170 khash+ GTX 670

Alternate cryptocurrencies / Mining (Altcoins) / Re: [ANN] cudaMiner - a new litecoin mining application [Windows/Linux]

on: May 01, 2013, 10:31:07 AM

This is written in the Readme, hope it helps: Currently there is just one prefix, which is "S". Later releases may see the introduction of more kernel variants with using other letters. Examples: e.g. S27x3 is a launch configuration that works well on GTX 260 28x4 is a launch configuration that works on Geforce GTX 460 290x2 is a launch configuration that works on Geforce GTX 660Ti You should wait through autotune to see what kernel is found best for your current hardware configuration. The choice between Non-Titan and Titan CUDA kernels is automatically made based on your device's compute capability. Titans cost around a thousand dollars, so you probably don't have one. Prefix \| Non-Titan \| Titan ------------------------------------------------------- <none> \| low shared memory \| default kernel \| optimized kernel \| with funnel shifter \| \| S \| spinlock kernel \| spinlock kernel \| for Kepler GPUs \| with funnel shifter

Pages: [1] 2 »