Latest posts of: dniwaunuiwdniu

Show Posts
Pages: [1]

Alternate cryptocurrencies / Mining (Altcoins) / Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System

on: August 09, 2017, 09:12:29 AM

Quote from: draceus0 on August 09, 2017, 08:49:26 AM Installed SMOS to give it a try with only one GPU before I swap over my 2 main rigs but I found that overclocking doesn't seem to work? I'm running the latest version of the OS and my GPU is a 1060. When I go to the website and try to change my OC settings it says: "Those settings will work only with BETA image released 2017-07-04, if you have older then you need to reflash it !." But I already have the latest version and nowhere can I find a BETA image, am I missing something? I dont know how it is with nvidia, cause i dont got one. But the RX Version, with AMD can be overclocked perfectly with no issues. So overclocking at all works. So maybe you have the wrong version, overclocked too much, or it is still not available for NVIDIA.

Alternate cryptocurrencies / Mining (Altcoins) / Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System

on: August 08, 2017, 07:42:36 PM

Quote from: blackbull on August 07, 2017, 11:14:08 AM

Find Rig IP

ssh miner@RigIP
pass: miner

Check settings to verify that the default gateway is set correctly

route -n

Code:

miner@simpleminer:~$ route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         192.168.0.1        0.0.0.0        UG    0     0     0   eth0

thx for your help
I tried it now.
It looks like its not getting an IP. But the Gateway is right.
http://ibb.co/cGTPPv

Code:

miner@simpleminer:~$ route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.0.0         192.168.210.21        255.255.0.0        UG    0     0     0   eth0
192.168.210.0         0.0.0.0        255.255.255.0        U    0     0     0   eth0

Alternate cryptocurrencies / Mining (Altcoins) / Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System

on: August 07, 2017, 08:12:06 AM

Quote from: blackbull on August 06, 2017, 07:44:34 PM Quote from: dniwaunuiwdniu on August 06, 2017, 04:08:14 PM Is there a way to check the connection on the OS. Or what to do in that case.... need some help Hi, DHCP is enabled on router? Yes, Router is set to DHCP. And i tried to connect the same cable at the same port to a windows labtop. It had Internet and worked. Only my rig didnt get it... maybe i need to give him a fixed ip?

Alternate cryptocurrencies / Mining (Altcoins) / Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System

on: August 06, 2017, 04:08:14 PM

i finally successfully build a rig with 9 rx 560 and 2 rx 570 on simpleminingos. I tried everything home, and everything was up and running. Now i moved to the place where i wanted to mine. First, when i connected everything, my mobo didnt start up. I removed all gpus and started. It started but all my bios settings where gone (like gen2 and above 4g decoding). I changed everything and restarted with all my gpu's. It booted perfectly. But know i am getting this: trying connect simplemining.net... Then the miner starts. And yeah its clear that it cant connect... When i look at my mobo, i can see that my ethernet port is blinking red. I think that means smt is wrong... I disconnected my board and connected the cable to a computer. It had a connection. I changed the cable and checked again. Its working. So i connected it to the board and the same error... The connection is coming from a router. And its the 2nd device that's connected. Is there a way to check the connection on the OS. Or what to do in that case.... need some help

Alternate cryptocurrencies / Mining (Altcoins) / Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System

on: August 04, 2017, 10:27:09 AM

Can i use this OS to get 12 RX 560 running on an asus Z270-P? I got some risers and riser extensions. Tried it on windows, but i am stuck at 7GPU. Connecting one more and everything crashes. And can i also modd the gpu bios on windows and then connect it to the miner? would it work?

Alternate cryptocurrencies / Mining (Altcoins) / Re: Asus prime Z270-p

on: August 04, 2017, 12:44:28 AM

i got the asus Z270-P and 13GPU's i have problems getting more than 7 to work. I got this pcie extensions. Looks like a riser but u can connect up to 4 risers to it. When i connect 8 cards. Sometimes it only get 5, sometimes 6 and sometimes 7. But never all the 8. Also the system keeps crushing, and flashing black screen. Is it at all possible to get more than 8gpu's working on that board? I have problems getting the riser extensions to work ~~ i am using windows 10, but rdy to change the os if this will solve my problem ~~

Alternate cryptocurrencies / Mining (Altcoins) / Re: RX 560 4GB Ethereum

on: August 03, 2017, 10:30:57 AM

I solved my problem with the ASUS Mainboard. I just needed to update the BIOS and the enable above 4g decoding did you guys got anything higher than 15.7 Mh/s?? I was playing with my cards to get them over 14Mh/s. i got sapphire rx560 4gb with micron. I cant remember what exactly i have changes, but i got one (the one i was playing with) to mine with 18.xxx Mh/s. But the machine crashed after 2min. I restarted it and played with the settings again (lower memory and core) but it didnt help. Still at 18.xxx but crashes after some seconds. So i let it rest and tried smt else. Now i am mining with 13.5x stable. I read someone got the with 15.xx and posted his rom. Gonna check it out later. I will try to find the rom that got 18.xxx and post it here. Maybe someone can get it stable? just wanted to share my experience

Alternate cryptocurrencies / Mining (Altcoins) / Re: RX 560 4GB Ethereum

on: July 27, 2017, 08:54:39 AM

Quote from: votsirh on July 26, 2017, 09:34:44 PM Quote from: dniwaunuiwdniu on July 26, 2017, 07:07:04 PM HI first of all i was following this thread from the start and i am giving a big THANK YOU to all of the people who shared their experience with the cards. Because of you i am getting stable 13,8 - 14 MH/s and i am truly happy with it. I will share something more if i am sure about it. But now i have a problem. I have 12x sapphire RX 560 4GB Micron. My Mobo is: Asus Prime Z270-P Gaming I was working with only 4 GPU's because i am still waiting for more risers and psu. Yesterday i got the rest of my cards. I flashed everyone with the working modded bios (and saved the original). When i connect 6 cards (one on the mobo and 4 with risers), i can see the cards in the hardware manager, but only 2 of them are working. The other 4 has a yellow circle. I tried to flash the original again and reinstall the driver. Also right click, update driver and choose the C0316027 file. Nothing worked. I tried with 5 cards. Also 2 working and the other 3 not. But when i only connect 4, they work. The risers are fine, i tested them all. Also all the gpus are working. Whats the problem? and how did you manage to get 6 gpus working? 4g Decoding enabled from the MB Bios ? Thx for your answer. I enabled it, but when i start my windows i only got a black screen. I couldnt see anything. So i disabled it again. I did not change anything else in the mobo bios. and i forgot to mention. Its error code 12 on the gpu Hope someone can help me to get all the gpus to run ~~

Alternate cryptocurrencies / Mining (Altcoins) / Re: RX 560 4GB Ethereum

on: July 26, 2017, 07:07:04 PM

HI first of all i was following this thread from the start and i am giving a big THANK YOU to all of the people who shared their experience with the cards. Because of you i am getting stable 13,8 - 14 MH/s and i am truly happy with it. I will share something more if i am sure about it. But now i have a problem. I have 12x sapphire RX 560 4GB Micron. My Mobo is: Asus Prime Z270-P Gaming I was working with only 4 GPU's because i am still waiting for more risers and psu. Yesterday i got the rest of my cards. I flashed everyone with the working modded bios (and saved the original). When i connect 6 cards (one on the mobo and 4 with risers), i can see the cards in the hardware manager, but only 2 of them are working. The other 4 has a yellow circle. I tried to flash the original again and reinstall the driver. Also right click, update driver and choose the C0316027 file. Nothing worked. I tried with 5 cards. Also 2 working and the other 3 not. But when i only connect 4, they work. The risers are fine, i tested them all. Also all the gpus are working. Whats the problem? and how did you manage to get 6 gpus working?

Pages: [1]