Yeap. so GRAFT market cap would hit 1 billion.  

GRAFT is very good fork of monero. Plus with all master node structure to achieve the instant authorization. I am very positive about this project.

ETN market cap is 4M 400mil usd. literally just changed total supply to 21 billion. I would expect GRAFT would double ETN market cap to reach 8 800M at least.

I have read some comments about 27% dev reserve. Please do remember Neo has reserved 50% of coins.  

I am pointing all my hash power to the graft mining pool.


--sorry  i inputed the wrong number.

I tried the US official pool - http://us.pool.graft.network pool. ironically, it is not very stable.

I later tried graft.online. this pool is quite stable and this site's owner also complied the CLI wallet of graft which i am using now.

I chatted him in telegram. He is very helpful.

for easyhash, i did not have this problem while in easyhash, i cannot monitor each rig's hash rate and there is also no mail alert function.

BTW: Estimate Mining Profits in easyhash is great feature.  The result is quite accurate and you can quickly decide which coin to mine.

I am using these 2 pools
http://graftpool.net  fee 0.1%
https://www.graftpool.online fee 1%

The main reason is these 2 pools can send alert mail if the rig is down.

Hello Guys,

Recently I have built 8GPU VEGA mining rig. The rig contains: 5*MSI Radeon RX Vega 64, 8GB+2*Gigabyte Radeon RX Vega 56 8GB+1*Gigabyte Radeon RX Vega 64 Gaming
OC 8GB Video Card.

except the HBM problem, i had another problem when I was mining GRAFT on certain pools. some times, the pool will reject all share with reason "Unauthenticated".  please refer to the log below.  And the rig will be stuck in this status forever until a reboot.

[23:38:40] GPU2 | 52øC | Fan 4002 RPM | 1927.2 H/s
[23:38:40] GPU0 Found Nonce, submitting...
[23:38:40] !Rejected by pool! Reason: Unauthenticated

To address this, I developed a monitoring powershell scripts to monitor the accpeted shared by pool. if shares are not increased in 2 minute, then the rig will be rebooted.

it works pretty well since it also address another problem i had, some times rig will be doing nothing if one card is not hashing.  

I am not a professional powershell developer. This was my first time to use powershell and I developed this script one night with the help of google.

Here is the link for your reference in case you are having same headache.

https://drive.google.com/file/d/1aJCE6kAZawQ_Mi9NQ-JnW0xJtuoqRiSO/view

I am mining at http://graftpool.net and got around 800 coins in a day with my vega mining rig.  I am happy with the result.

I will stick to GRAFT mining now  

I noticed GRAFT coin from easyhash pool and it seems very profitable now.
The mainnet is online less than one month.

I read the white paper. And it seems pretty good project. The project is solving the payment issue on the pos (point of sale).
And all the transactions are instant authorisation which is like our visa credit card.

They did not invent new wheel and they achieved this by fork monero + all dash master nodes.

I will switch my hash power to GRAFT now.

It is working well with my VEGA 64 while Can XMR-AEON-STAK print the GPU temperature and fan speed? 

The VEGA is very sensitive... if GPU-Z opened, then the hashrate drops from 19xx to 17xx.

Thanks.

Just remind you that ETH is definitely going to POS.

ROI is always getting worse after you started to build your rig.

For me, I enjoyed building rigs. Even having said that, after spending so much night time and weekends to build rigs and troubleshooting, I was very frustrated in a few days.

I am building a rig with 13 GPU (8*AMD+5*Nvidia). I am wondering how can i overclock and undervolt in this scenario.

let's assume GPU#0-7 is AMD, GPU  #8-12 is Nvidia. Take mclock as an example, do i have to specify the nvidia cards' memory clock since claymore does not support.

-mclock 2180,2050,2180,2050,2050,2180,2180,2180,XXXX,XXXX,XXXX,XXXX,XXXX    

DDU uninstall driver. re-install blockchain beta driver. Patch driver.

Got 27.9MH/s for this card.

Best thanks. Mate.

Thanks. I will try tonight

Thanks for the information. sorry that i did not make things very clear. I did patch the driver with atikmdag-patcher-1.4.5. And I successfully modded the BIOS of other cards (msi RX580 8G/Gigabyte RX580 4G/Sapphire RX580 8G).  I just failed on this card only.

BTW: As a noob, I spent whole night to google to fix this problem. And i even flashed the BIOS someone posted online as a working BIOS MOD of same card.
Then I finally decide to post a thread this morning. 

A very well build card but i cannot mod the BIOS.

I simply copied timing of strap 0:1500 to 1625/1750/2000.

After reboot, in windows 10 device manager, I got this error:  
"Windows has stopped this device because it has reported problems. (Code 43). "





Driver: win10-64bit-crimson-relive-beta-blockchain-workloads-aug11
It is patched by atikmdag-patcher-1.4.5
win 10 pro 64 bit

I can recover the card by flash the original backup BIOS.
I tried a couple of times, but the result is same.

HELP NEEDED.

I did use DDU in safe mode to remove the driver then install new driver + atikmdag-patcher-1.4.5.

But I am having the exactly same problem as antiycda has. The memory clock is fluctuating between 1000MHz and 2080MHz which I overclocked in claymore.

All the cards are the same which include the following 3 model in my csae.

    1.MSI Radeon RX580 ARMOR 8G OC Graphics Card
    2.MSI Radeon RX 580 Gaming X 8G Graphics Card
    3.Sapphire Nitro RX580 8G

Anyone has figured out a solution about this?

Best thanks, mate. It is working. Send me you wallet address of ETH. I want to buy you a coffee.

Hello Guys,

I am noob in mining and i am building my mining rig in win 10 64 bit. I have 2 MSI RX580 Armor 8G. For every individual GPU, i can undervolt/overlock the GPU by these parameters (single GPU in rig).

-cvddc 900 -cclock 1200 -mclock 2080. I verified in GPU-Z, it is working.

But if there are 2 GPU cards in rig, I found these parameters only applied in the first GPU #0, for the second GPU, it is working in the default clock and volt.

I tried the following command, while the result is still same, only GPU #0 is undervolted and overclocked.  

Just wondering if i did something wrong. Can anyone help, please?


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-asia1.nanopool.org:9999 -ewal 0x4319c495431b0a8c85af88497144184de8ff5a71.RX580/leo@gmail.com -epsw x -mode 1 -ftime 10 -cvddc 900,900 -cclock 1200,1200 -mclock 2080,2080