 Show Posts
|
|
Pages: [1] 2 »
|
|
Hi Devs,
Have you test Polaris and Vega at Progpow ??
Because U are the Expert on AMD Card
|
|
|
|
Many major coin, going to change Algorithm Xmr, ETC, ETH So...what will happen to Polaris card   |
|
|
|
Still, cannot apply setting at GUI version with start up
GUI open with default setting ?
Anyone got a tutorial ?
Because at Polaris, REFF is Important |
|
|
|
|
Still, cannot apply setting at GUI version with start up
GUI open with default setting ?
Anyone got a tutorial ?
|
|
|
|
Could GUI version running and apply at startup ?
Because it did not change anything yet if run at start up, so must apply it manually
CLi version only change REF, rfc and others not chamge
Just test it with Polaris, that did not work |
|
|
|
|
Could GUI version running and apply at startup ?
Because it did not change anything yet if run at start up, so must apply it manually
CLi version only change REF, rfc and others not chamge
|
|
|
|
Is there any solution for the non ref 56 cards that have a default of 800 mem and can’t go past 900-950?
I got four of these crap cards any thoughts ? Three are red devil 56 power colors and one is a sapphire pulse
If you're lucky, you might find a Vega 64 vbios for that same card (if they made em both 56 & 64), which is unique.. not much out there, Pulse, only 56 afaik. That however doesn't mean they're crappy, i've got a Sapphire Pulse with Hynix memory and it's running smooth at 47~Mh (memory at 975). Got a Samsung Vega56 too and hits 48+Mh.. The thing is, they only have 6 SOC states, so it gets auto forced into a lower memory state (800MH), you can see this in the tool.. Vega 64 has 8 SOC states, therefor it goes to the highest memory state (1000Mh). is there way to apply straps like the claymore miner ?
for polaris
GUI version has an export/import feature, you can use that.. "kind" of the same. Wow...975 mclock, Wattage ? Soft PP or 64 bios ? Btw Wonderful Hello,
I have strange problem with one rig with 3 vega 64 liqued cooling.
I try many memory tweaks with latest memtweak cli and got 51,5 Mh/s on each vega, but pools (ethermine, 2miners, miningpoolhub) show disconected status. But if I lucky and pool accept connections -> low end pool hashrate
HBM2 1100 and CORE 1050 on all three cards (Win10x64 1809). Tried claymore and phoenix. Coins - etc, eth, exp
When i reset timings - all card hashing without problems on pool.
Thank you in advance for any advice.
I'm not able to reproduce this, just to be sure i let my Vega 64 run at 53Mh for half an hour, pool hashrate was spot on. What are your timings? Cheers! |
|
|
|
I made a good set up for my two vega 56@64,i get 2350 hash each, but my pc lag, stuck when I do anything even when I move mouse, I use red team miner, the amd mem tweak tool, win 10 pro 64,drivers 19.4.1,19.42.
what's your setup, can you share it, and what card you own?  happy mining my friend!thanks to Eviolp! Wow excellent Watt at the wall and GPU Z/ hwinfo ? |
|
|
|
|
So Now
Do research about profitable with this Great Tweaking of the Decade,
ETHASH or CNR ?
|
|
|
|
So, CNR must be perfect in tuning, then hashrate got reward in good shares Beside that, Pool eficiency must be good, so mining profitable https://moneroocean.stream/profits/Monero Pools Profits Generated 56 minutes 54 seconds ago Pool name Last day profits Last week profits Last bi-weekly profits Last month profits Last bi-month profits Last quarter profits Last half a year profits dwarfpool.com 116.15% 120.90% 117.29% 101.36% 112.96% 103.50% 88.70% minexmr.com 58.82% 96.14% 99.96% 94.90% 96.13% 97.88% 99.02% monero.crypto-pool.fr 0.00% 0.00% 44.53% 42.27% 63.00% 55.43% 53.26% monero.hashvault.pro 176.43% 128.86% 129.45% 127.37% 104.63% 99.04% 95.58% monerohash.com 93.51% 100.85% 90.63% 80.52% 85.43% 89.31% 93.94% moneroocean.stream 97.95% 87.67% 79.01% 80.67% 99.28% 95.80% 93.09% moneropool.com 0.00% 102.05% 98.56% 96.51% 80.62% 80.79% n/a nanopool.org 108.61% 98.64% 93.32% 97.17% 96.77% 96.92% 95.67% reference 100.00% 100.00% 100.00% 100.00% 100.00% 100.00% 100.00% supportxmr.com 98.85% 93.97% 95.68% 95.05% 93.22% 95.57% 95.48% xmr.f2pool.com 97.79% 97.32% 96.54% 96.69% 98.59% 97.20% 97.44% xmrpool.eu 107.18% 105.41% 111.60% 95.31% 95.88% 96.42% 93.29% xmrpool.net 0.00% 33.05% 28.31% 37.30% 26.73% 26.11% 35.12% |
|
|
|
|
So, CNR must be perfect in tuning, then hashrate got reward in good shares
Beside that, Pool eficiency must be good, so mining profitable
Monero Pools Profits
Generated 56 minutes 54 seconds ago
Pool name
Last day profits
Last week profits Last bi-weekly profits Last month profits Last bi-month profits Last quarter profits Last half a year profits
dwarfpool.com 116.15% 120.90% 117.29% 101.36% 112.96% 103.50% 88.70%
minexmr.com 58.82% 96.14% 99.96% 94.90% 96.13% 97.88% 99.02%
monero.crypto-pool.fr 0.00% 0.00% 44.53% 42.27% 63.00% 55.43% 53.26%
monero.hashvault.pro 176.43% 128.86% 129.45% 127.37% 104.63% 99.04% 95.58%
monerohash.com 93.51% 100.85% 90.63% 80.52% 85.43% 89.31% 93.94%
moneroocean.stream 97.95% 87.67% 79.01% 80.67% 99.28% 95.80% 93.09%
moneropool.com 0.00% 102.05% 98.56% 96.51% 80.62% 80.79% n/a
nanopool.org 108.61% 98.64% 93.32% 97.17% 96.77% 96.92% 95.67%
reference 100.00% 100.00% 100.00% 100.00% 100.00% 100.00% 100.00%
supportxmr.com 98.85% 93.97% 95.68% 95.05% 93.22% 95.57% 95.48%
xmr.f2pool.com 97.79% 97.32% 96.54% 96.69% 98.59% 97.20% 97.44%
xmrpool.eu 107.18% 105.41% 111.60% 95.31% 95.88% 96.42% 93.29%
xmrpool.net 0.00% 33.05% 28.31% 37.30% 26.73% 26.11% 35.12%
|
|
|
|
IMO RFC impact to Share, High RFC much shares, Low RFC less shares
--RRDS 3 --RRDL 3 then GPU with high OCL and Intensity dead, --RRDS 5 --RRDL 5 stable |
|
|
|
|
IMO RFC impact to Share, High RFC much shares, Low RFC less shares
|
|
|
|
Hello, I want to ask you some questions about MSI 390x, Who Mine on MSI 390x.My 390x give out 23 megahesh,what do I need to do to get more? I have a miner claymore v 11.6 installed drivers 15.12 windows 8.1 x64. Tell me what I'm doing wrong or what needs to be done so that they get more,because RX 470 570 mines 29 mh,And 390x produces only 23 megahesh I’m sorry English don’t know to use google translator,thank you all for your attention I would be grateful ! 04:44:49:345 b24 Check and remove old log files...
04:44:49:548 b24 args: -mode 1 -r 0 -epool eu1.ethermine.org:4444 -ewal 0xd6aa0cc5d74708828bbcc3a0ce58974ac3c23c8d.Rig-1 -epsw ї -dcri 10
04:44:49:548 b24
04:44:49:564 b24 ЙHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH»
04:44:49:564 b24 є Claymore's Dual GPU Miner - v11.6 є
04:44:49:564 b24 є ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK є
04:44:49:564 b24 ИHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHj
04:44:49:564 b24
04:44:49:564 b24 b571
04:44:49:782 b24 ETH: 1 pool is specified
04:44:49:782 b24 Main Ethereum pool is eu1.ethermine.org:4444
04:44:53:220 b24 OpenCL platform: AMD Accelerated Parallel Processing
04:44:53:220 b24 OpenCL initializing...
04:44:53:220 b24 AMD Cards available: 5
04:44:53:220 b24 GPU #0: Hawaii (AMD Radeon (TM) R9 390 Series), 8192 MB available, 44 compute units (pci bus 1:0:0)
04:44:53:220 b24 GPU #0 recognized as Radeon 390X
04:44:53:220 b24 GPU #1: Hawaii (AMD Radeon (TM) R9 390 Series), 8192 MB available, 44 compute units (pci bus 3:0:0)
04:44:53:220 b24 GPU #1 recognized as Radeon 390X
04:44:53:236 b24 GPU #2: Hawaii (AMD Radeon (TM) R9 390 Series), 8192 MB available, 44 compute units (pci bus 4:0:0)
04:44:53:236 b24 GPU #2 recognized as Radeon 390X
04:44:53:236 b24 GPU #3: Hawaii (AMD Radeon (TM) R9 390 Series), 8192 MB available, 44 compute units (pci bus 5:0:0)
04:44:53:236 b24 GPU #3 recognized as Radeon 390X
04:44:53:236 b24 GPU #4: Hawaii (AMD Radeon (TM) R9 390 Series), 8192 MB available, 44 compute units (pci bus 6:0:0)
04:44:53:236 b24 GPU #4 recognized as Radeon 390X
04:44:53:236 b24 POOL/SOLO version
04:44:53:236 b24 Platform: Windows
04:44:53:611 b24 start building OpenCL program for GPU 0...
04:44:56:330 b24 done
04:44:56:564 b24 start building OpenCL program for GPU 1...
04:44:56:814 b24 done
04:44:57:049 b24 start building OpenCL program for GPU 2...
04:44:57:299 b24 done
04:44:57:517 b24 start building OpenCL program for GPU 3...
04:44:57:767 b24 done
04:44:57:986 b24 start building OpenCL program for GPU 4...
04:44:58:236 b24 done
04:44:58:471 b24 GPU #0: algorithm ASM 1
04:44:58:502 b24 GPU #1: algorithm ASM 1
04:44:58:549 b24 GPU #2: algorithm ASM 1
04:44:58:580 b24 GPU #3: algorithm ASM 1
04:44:58:611 b24 GPU #4: algorithm ASM 1
04:44:58:627 b24 cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
04:44:58:627 b24 No NVIDIA CUDA GPUs detected.
04:44:58:627 b24 Total cards: 5
04:44:58:689 b24 No NVIDIA cards in the list, NVML library will not be used.
04:44:59:799 b24 SSL: Imported 28 certificates from local storage
04:44:59:908 a78 ETH: Stratum - connecting to 'eu1.ethermine.org' <172.65.207.106> port 4444 (unsecure)
04:44:59:924 b24 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
04:44:59:924 b24 ETH: eth-proxy stratum mode
04:44:59:924 b24 Watchdog enabled
04:44:59:924 b24 Remote management (READ-ONLY MODE) is enabled on port 3333
04:44:59:924 b24
04:44:59:939 a78 sent: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0xd6aa0cc5d74708828bbcc3a0ce58974ac3c23c8d.Rig-1", "ї"], "id": 2, "method": "eth_submitLogin"}
04:44:59:955 a78 ETH: Stratum - Connected (eu1.ethermine.org:4444) (unsecure)
04:45:00:049 a78 buf: {"id":2,"jsonrpc":"2.0","result":true}
04:45:00:049 a78 ETH: Authorized
04:45:00:049 a78 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
04:45:00:111 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0x56f512e68aef535aa52717e29a57d174a362ceaa7742a42cdbaac810c0bffc3d","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739a19"]}
04:45:00:143 bfc Setting DAG epoch #252...
04:45:01:658 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0x62e6d36e4e874649338fbcc003cc2d0e7500379019dc757f368b9a336479b3a0","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739a19"]}
04:45:01:658 a78 ETH: 04/16/19-04:45:01 - New job from eu1.ethermine.org:4444
04:45:01:658 a78 target: 0x0000000112e0be82 (diff: 4000MH), epoch 252(2.97GB)
04:45:01:658 a78 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
04:45:01:658 a78 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
04:45:03:565 4fc Setting DAG epoch #252 for GPU0
04:45:03:565 bfc Setting DAG epoch #252 for GPU3
04:45:03:565 994 Setting DAG epoch #252 for GPU1
04:45:03:565 4fc Create GPU buffer for GPU0
04:45:03:580 bd4 Setting DAG epoch #252 for GPU4
04:45:03:580 bd4 Create GPU buffer for GPU4
04:45:03:580 994 Create GPU buffer for GPU1
04:45:03:580 bfc Create GPU buffer for GPU3
04:45:03:580 708 Setting DAG epoch #252 for GPU2
04:45:03:596 708 Create GPU buffer for GPU2
04:45:05:659 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0x5e14a866631f377e608c132947221b2b30fd66376c083dda1aad6b27f6e05e28","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739a19"]}
04:45:05:659 a78 ETH: 04/16/19-04:45:05 - New job from eu1.ethermine.org:4444
04:45:05:659 a78 target: 0x0000000112e0be82 (diff: 4000MH), epoch 252(2.97GB)
04:45:05:659 a78 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
04:45:05:659 a78 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
04:45:09:534 4fc GPU0 DAG creation time - 5891 ms
04:45:09:534 4fc Setting DAG epoch #252 for GPU0 done
04:45:09:581 708 GPU2 DAG creation time - 5850 ms
04:45:09:581 bfc GPU3 DAG creation time - 5855 ms
04:45:09:581 708 Setting DAG epoch #252 for GPU2 done
04:45:09:596 994 GPU1 DAG creation time - 5845 ms
04:45:09:581 bfc Setting DAG epoch #252 for GPU3 done
04:45:09:596 bd4 GPU4 DAG creation time - 5863 ms
04:45:09:596 994 Setting DAG epoch #252 for GPU1 done
04:45:09:596 bd4 Setting DAG epoch #252 for GPU4 done
04:45:09:643 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0xaa1c79d6b6fd7a0ea14395f75d673e1dc402e6144f908a43671244429886c4da","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739a19"]}
04:45:09:643 a78 ETH: 04/16/19-04:45:09 - New job from eu1.ethermine.org:4444
04:45:09:643 a78 target: 0x0000000112e0be82 (diff: 4000MH), epoch 252(2.97GB)
04:45:09:643 a78 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
04:45:09:643 a78 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
04:45:10:128 a78 ETH: checking pool connection...
04:45:10:128 a78 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
04:45:10:190 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0xaa1c79d6b6fd7a0ea14395f75d673e1dc402e6144f908a43671244429886c4da","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739a19"]}
04:45:11:206 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0x2d6c078431c61524d28cd65076a18eb8bb7b07634f315c3a6418541d8a8c725a","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739a1a"]}
04:45:11:222 a78 ETH: 04/16/19-04:45:11 - New job from eu1.ethermine.org:4444
04:45:11:222 a78 target: 0x0000000112e0be82 (diff: 4000MH), epoch 252(2.97GB)
04:45:11:222 a78 ETH - Total Speed: 116.124 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
04:45:11:222 a78 ETH: GPU0 23.241 Mh/s, GPU1 23.063 Mh/s, GPU2 23.283 Mh/s, GPU3 23.274 Mh/s, GPU4 23.264 Mh/s
04:45:11:268 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0x400ec5c6c2fb863cc770915194595aa67efc10dca96b9e9f9bcc1a093648aa03","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739a1a"]}
04:45:11:268 a78 ETH: 04/16/19-04:45:11 - New job from eu1.ethermine.org:4444
04:45:11:268 a78 target: 0x0000000112e0be82 (diff: 4000MH), epoch 252(2.97GB)
04:45:11:268 a78 ETH - Total Speed: 116.124 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
04:45:11:268 a78 ETH: GPU0 23.241 Mh/s, GPU1 23.063 Mh/s, GPU2 23.283 Mh/s, GPU3 23.274 Mh/s, GPU4 23.264 Mh/s
04:45:15:238 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0x06cd875880b29cad073c769bf7d9114dc16af59090d478ad95af657c6db83994","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739a1a"]}
04:45:15:238 a78 ETH: 04/16/19-04:45:15 - New job from eu1.ethermine.org:4444
04:45:15:238 a78 target: 0x0000000112e0be82 (diff: 4000MH), epoch 252(2.97GB) One more question,sometimes the miner restarts without a clear reason for me. I need your help. Please help me deal with this problem. 06:25:10:830 a78 ETH: 04/16/19-06:25:10 - SHARE FOUND - (GPU 0)
06:25:10:865 a78 buf: {"id":10,"jsonrpc":"2.0","result":true}
06:25:10:866 a78 ETH: Share accepted (63 ms)!
06:25:13:588 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0x21f2c7369151d729ec5bc9784c5fe203d9ff9aa6a8f4732a6a0f6a5604002a15","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739bba"]}
06:25:13:590 a78 ETH: 04/16/19-06:25:13 - New job from eu1.ethermine.org:4444
06:25:13:592 a78 target: 0x0000000112e0be82 (diff: 4000MH), epoch 252(2.97GB)
06:25:13:594 a78 ETH - Total Speed: 115.922 Mh/s, Total Shares: 161, Rejected: 0, Time: 01:40
06:25:13:596 a78 ETH: GPU0 23.246 Mh/s, GPU1 22.845 Mh/s, GPU2 23.286 Mh/s, GPU3 23.281 Mh/s, GPU4 23.264 Mh/s
06:25:13:726 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0xde89670f359f9f569380b94e4f2812969c4280251e98cb49f5ba301b3f5fadd1","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739bba"]}
06:25:13:728 a78 ETH: 04/16/19-06:25:13 - New job from eu1.ethermine.org:4444
06:25:13:730 a78 target: 0x0000000112e0be82 (diff: 4000MH), epoch 252(2.97GB)
06:25:13:733 a78 ETH - Total Speed: 115.922 Mh/s, Total Shares: 161, Rejected: 0, Time: 01:40
06:25:13:735 a78 ETH: GPU0 23.246 Mh/s, GPU1 22.845 Mh/s, GPU2 23.286 Mh/s, GPU3 23.281 Mh/s, GPU4 23.264 Mh/s
06:25:15:296 830 em hbt: 0, fm hbt: 79,
06:25:15:297 830 watchdog - thread 0 (gpu0), hb time 562
06:25:15:299 830 watchdog - thread 1 (gpu0), hb time 62
06:25:15:300 830 watchdog - thread 2 (gpu1), hb time 172
06:25:15:302 830 watchdog - thread 3 (gpu1), hb time 672
06:25:15:303 830 watchdog - thread 4 (gpu2), hb time 562
06:25:15:305 830 watchdog - thread 5 (gpu2), hb time 62
06:25:15:307 830 watchdog - thread 6 (gpu3), hb time 62
06:25:15:308 830 watchdog - thread 7 (gpu3), hb time 562
06:25:15:310 830 watchdog - thread 8 (gpu4), hb time 62
06:25:15:312 830 watchdog - thread 9 (gpu4), hb time 562
06:25:17:680 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0xea35df9d9810089fcbe32eadbee4526211599137f194c7791f6c1334f7bebc2b","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739bba"]}
06:25:17:683 a78 ETH: 04/16/19-06:25:17 - New job from eu1.ethermine.org:4444
06:25:17:685 a78 target: 0x0000000112e0be82 (diff: 4000MH), epoch 252(2.97GB)
06:25:17:688 a78 ETH - Total Speed: 116.127 Mh/s, Total Shares: 161, Rejected: 0, Time: 01:40
06:25:17:689 a78 ETH: GPU0 23.246 Mh/s, GPU1 23.055 Mh/s, GPU2 23.288 Mh/s, GPU3 23.276 Mh/s, GPU4 23.262 Mh/s
06:25:20:485 a78 ETH: checking pool connection...
06:25:20:486 a78 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
06:25:20:540 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0xea35df9d9810089fcbe32eadbee4526211599137f194c7791f6c1334f7bebc2b","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739bba"]}
06:25:20:920 82c GPU0 t=66C fan=100%, GPU1 t=67C fan=100%, GPU2 t=68C fan=100%, GPU3 t=53C fan=100%, GPU4 t=57C fan=100%
06:25:21:687 a78 buf: {"id":0,"jsonrpc":"2.0","result":["0xce95458d49ee166b259bd9af45db17f28da9b85192e6f267ee7040f496407013","0x5cbbbaf16186360dfe0f34a286869b77ec51862864f266bc88e6150a00a57cb2","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x739bba"]}
06:25:21:689 a78 ETH: 04/16/19-06:25:21 - New job from eu1.ethermine.org:4444
06:25:21:691 a78 target: 0x0000000112e0be82 (diff: 4000MH), epoch 252(2.97GB)
06:25:21:693 a78 ETH - Total Speed: 116.052 Mh/s, Total Shares: 161, Rejected: 0, Time: 01:40
06:25:21:696 a78 ETH: GPU0 23.245 Mh/s, GPU1 22.985 Mh/s, GPU2 23.284 Mh/s, GPU3 23.275 Mh/s, GPU4 23.264 Mh/s Rise core clock a lot, but Mem Clock a few High temperature didn't it ? Virtual Memory min 16.000, Disable ULPS |
|
|
|
Ethash is even better than cn-trtl wrt being able to drop core clock on vega. Where you may lose 5+% h/r on trtl by going to cclock p0 (852mhz), I saw zero h/r loss on ethash when doing the same, at least w/ stock timings. Should allow you to get your voltage down significantly - closer to 800mv.
why do you need such low gpu clocks if vega is perfectly capable of higher clocks with <800mv voltage?  it is vega56 pulse with hynix 20.5kh/s turtle btw vega56 ref samsung can do the same ... Wow, with Soft PP or AMD tweaking ? Great info 19.4.1 drivers allow you to control and disable (grey) all p-states via ODNT! (except mem p2 voltage) Just set mem P2 voltage to 800 with softpowerplay ))  And make working freq ~1200 Than test stability, than apply timings -rc 37 --rcdrd 12 --rcdwr 5 --rp 13 --faw 16 --rtp 4 --rrds 3 --rrdl 3 --CWL 6 --WTRS 4 --WTRL 9 --REF 12800 Use --cn_config L22+22 or --cn_config L20+20 for teamred )) And last but not least - screen of overnight testing no hw errors and h/r on the pool is ok  Greatttt, thanks for the Enlightment |
|
|
|
Ethash is even better than cn-trtl wrt being able to drop core clock on vega. Where you may lose 5+% h/r on trtl by going to cclock p0 (852mhz), I saw zero h/r loss on ethash when doing the same, at least w/ stock timings. Should allow you to get your voltage down significantly - closer to 800mv.
why do you need such low gpu clocks if vega is perfectly capable of higher clocks with <800mv voltage? it is vega56 pulse with hynix 20.5kh/s turtle btw vega56 ref samsung can do the same ... Wow, with Soft PP or AMD tweaking ? Great info |
|
|
|
Vega 64, aircooled, samsung: - Highest Hashrate impact : lower RC (good cards : 44, lower cards 45) - too low leads to invalid shares
- RP has high impact on stabilty, but low impact on hashrate (preferred 12 as average for stability) -- too low leads to gpu crash withing minutes
- Second highest HR impact : lower RFC (248) - too low crashes cards
- Having RRDS and RRDL as same value helps in stability
- Better to leave CL unimpacted in my tests, it is pretty much linked to all values.
- There are some hidden param that are not exposed by the tool, so it is advised that if you are not gonna change a value, dont use that param to set the default value, ignore the parameter
- Normal memory overclock plays a huge part in this tuning. 1107mhz is the highest you can reach without breaking the SOC barrier. You must have a stable non invalid shares throwing OC b4 appling the timing.
- My 6 cards timing and OC:
- 1. 1107 : --rcdrd 12 --rcdwr 5 --rc 44 --rp 12 --rrds 3 --rrdl 3 --rfc 248 : Valid Shares : Highest OC, Timing
- 2. 1107 : --rcdrd 12 --rcdwr 5 --rc 44 --rp 12 --rrds 3 --rrdl 3 --rfc 248 : Valid Shares : Highest OC, Timing
- 3. 1050 : --rcdrd 12 --rcdwr 5 --rc 44 --rp 12 --rrds 3 --rrdl 3 --rfc 248 : Highest Timing, Invalid Shares if 1107 OC - 1 invalid per 10 mins
- 4. 1050 : --rcdrd 12 --rcdwr 5 --rc 44 --rp 12 --rrds 3 --rrdl 3 --rfc 248 : Highest Timing, Invalid Shares if 1107 OC - 1 invalid per 10 mins
- 5. 1107 : --rcdrd 12 --rcdwr 5 --rc 45 --rp 12 --rrds 3 --rrdl 3 --rfc 248 : Highest OC, Invalid Shares if --rc 44 - 1 invalid per 4 hours
- 6. 1107 : --rcdrd 12 --rcdwr 5 --rc 45 --rp 12 --rrds 3 --rrdl 3 --rfc 248 : Highest OC, Invalid Shares if --rc 44 - 1 invalid per 3 hours
My testing have been limited to only few params, yet to fully test the other params. ETH and CNR ? |
|
|
|
Still running. There is no problem even on the lower quality silicon GPU's (yet). Ref Vega 56@64 bios, samsung HBM. This is my lighter timing, hopefully stable:
--CL 19 --RAS 30 --RCDRD 12 --RCDWR 6 --RC 44 --RP 13 --RRDS 5 --RRDL 5 --RTP 4 --FAW 18 --CWL 6 --WTRS 4 --WTRL 9 --WR 15 --WRRD 1 --RDWR 18 --REF 17000 --RFC 248
please test it.
latest 19.4.1 drivers. win10 vega64 lc ~1360/1100@875 51.4mhs with claymore 12. But hbm temp is hot 70C and one weaker vega gives sometimes red incorrect shares 22.3 kh/s trtl, testing for pool speed and hw errors Power Consumption at HW info ? 150 for eth and 135 for trtl I'm testing it on my both 6 and 5 card rigs. On the 6 card rig power consumption went up from 1155W to 1205W for roughly 10% hashrate gain (these are the worse silicon GPU-s, 3 of those running on 0.85V, 1 on 0.8375, last 2 on 0.825V). Unfortunately currently there is no watt meter on the 5 card rig. I will update about the stability. What happen with the timings when you reboot? If it stays after reboot, how do you set the timings back to the default values? Overdriventool : reset and apply |
|
|
|
This is my lighter timing, hopefully stable:
--CL 19 --RAS 30 --RCDRD 12 --RCDWR 6 --RC 44 --RP 13 --RRDS 5 --RRDL 5 --RTP 4 --FAW 18 --CWL 6 --WTRS 4 --WTRL 9 --WR 15 --WRRD 1 --RDWR 18 --REF 17000 --RFC 248
please test it.
latest 19.4.1 drivers. win10 vega64 lc ~1360/1100@875 51.4mhs with claymore 12. But hbm temp is hot 70C and one weaker vega gives sometimes red incorrect shares 22.3 kh/s trtl, testing for pool speed and hw errors Power Consumption at HW info ? |
|
|
|
This is my lighter timing, hopefully stable:
--CL 19 --RAS 30 --RCDRD 12 --RCDWR 6 --RC 44 --RP 13 --RRDS 5 --RRDL 5 --RTP 4 --FAW 18 --CWL 6 --WTRS 4 --WTRL 9 --WR 15 --WRRD 1 --RDWR 18 --REF 17000 --RFC 248
please test it.
What about Vega 56 Samsung and Hynix ? |
|
|
|
|
