Latest posts of: esrodrig

Show Posts
Pages: [1]

on: December 05, 2020, 04:41:05 PM

Quote from: bobzombie on May 25, 2020, 08:04:18 PM [...] I have two S17 Pro that shows CGminer 1.0.0. You said yours is CGMiner 2.0.0? How to get this?

on: November 28, 2020, 03:09:13 AM

I used RaveOS 1.0.21 with Claymore 15 and I got error GPU5 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU I found that upgrading to latest RAVEOS meaning to 1.0.24 fixed the issue. Now mining properly.

on: May 26, 2020, 03:51:29 AM

Quote from: notbatman on September 16, 2017, 07:38:04 AM Quote from: syraka76 on September 15, 2017, 06:37:29 PM sapphire RX570 8gb nitro + memory hynix. these cards suck they are not good for mining, I tried everything, all the timing, in all possible modes, the max to be stable 27.5 mhs It might actually be your mainboard bottlenecking your gpu, one of my ud3 boards does this to me. That sapphire should go over 30 MH/s no problem. I'll post a rom for you to try out in a bit, see if that helps. update: Sapphire Nitro+ RX570-8GB (Hynix) Mining BIOS Warning untested BIOS! This BIOS gives me 31.902 MH/s 100 W . Its a beast but will it burn the card too fast?

on: August 23, 2018, 01:31:08 PM

Y alguien las trae directo de china a Venezuela, o siempre la traen por United States? - Esr

on: August 23, 2018, 01:16:42 PM

Quote from: HND29 on June 05, 2018, 03:32:00 AM Hermano yo pague el 25% del costo segun factura de Bitmain por cada equipo, cada equipo em costo 485$ el 25% son 121.25 x 2 equipos= 242.50$ mas 60$ por cada fuente de poder, es decir, 242.50 + 120= 362.50$ por 2 equipos, hace unas semanas estaban cobrando 350$ por cada equipo, pero ya eso se ha normalizado, o mejor dicho, depende de la empresa de courier que tanto contacto y palanca tenga con la gente de la aduana. amigo q compania fue la que usaste? y que tiempo te tardaste en recibirlos.? Y cual fue la empresa usada aca? yo he pagado 300 y me han llegado sin problema. He oido del 20% y ahora del 25% pero nunca dicen cual es la empresa. Gracias -esr

on: August 23, 2018, 02:32:43 AM

Quote from: sergw on August 22, 2018, 11:13:32 PM well, i tried that bmminer880 on ~20 S9 13.5T and 14T models, so 15 are good, but 5 rest(only 13.5T) show Chip temp above 100C with even 650 freq in 1-2min after start. i dont understand what is the difference between that antminers, all have identical spec: S9_V2.54 HW: 16.8.1.3 Bmver: 2.0.0 Firmware: Fri Nov 17 17:37:49 CST 2017 any thoughts? I have seen similar before and in some cases adjusting/tightening the connectors for the fans, and cards helped to resolved the problem. -esr

on: August 22, 2018, 02:56:02 AM

Hi Thank you for this. I have installed the bmminer880 mod, using the auto-freq default firmware. I don't have in my house a bitmain 1600 psu. I have EVGA G2 Gold-1600 watts. I am running one of my S9 13.5 at 700 , and its giving around 14.9 Th/s. Good stable for about 30 mins. Good temps below 86 for chip2. At 725 it gave me a little bit more : ideal-15.6, avg: 15.3 Th/s- good stable for about 15 mins. Good temps below 87 for chip2. At 750 it gave me a little bit more : ideal 16.159, avg: 15.7 Th/s - good stable for about 15-20 mins. Good temps below 90 for chip2. Few hardware errors in two of the cards chain 6: 1 Hw-error chain 7: 7 Hw-errors chain 8: 0 Hw-errors At 800 it gave me a little bit more : ideal 17.236, avg: 16.4 Th/s - good stable for about 15-30 mins. Good temps below 94 for chip2. This one game me more hardware errors chain 6: 40 Hw-errors chain 7: 45 Hw-errors chain 8: 3 Hw-error It also seems the discarded increases a lot when running at 800, and the pool does not reach expected high values for hash rate. Maybe an observation issue... but just reporting. I am afraid of increasing the Freq above 800. I will repeat the above tomorrow to try to measure the power draw at the wall. Will report if I can make it. In any case This is AWESOME! Thanks! - esr

on: June 13, 2018, 02:38:08 PM

Quote from: Jumbley on June 09, 2018, 10:46:55 PM Quote from: diccp on June 09, 2018, 05:22:46 PM I hope Digibyte go to Binance, any news or still olny a rumor? All Binance enquiries should be made at Binance, these questions cannot be answered by DigiByte developers or community members because we do not know. Applications have been made and the ball is entirely in the Binance court.....DigiByte foundation will still not pay a listing fee, so don't hold your breathe and by far the majority of the DGB community is.....well not bothered! Why not check out DX Exchange? DigiByte will be on it at launch! https://dx.exchange/ There is an opportunity to list DGB in Binance for free by voting in the Binance coin of the month Round 7 https://support.binance.com/hc/en-us/articles/360004772311-Community-Coin-of-the-Month-Round-7 Coin needs to be nominated by core developers and binance registered users can vote. This should be an easy WIN. Lets get the coin nominated and vote. - esra

on: May 11, 2018, 02:23:21 AM

Please advice what to do. I have created an account and I am trying to reset the password. I get the email with account and temporary password but when I try to login with those credentials it says user or password is invalid. I have done it several times? What to do? Est-

on: February 28, 2018, 02:17:23 AM

Hi all Thank you for your miner. I've used use for several months and its great. Keep the good work please. Now version 10.5 does detect my 5 cards 4-570 and 1-VEGA-56 Version 11 does not detect the VEGA-56. Does version 11.1 fix that? I have not tried upgrading yet drivers yet. But same system I start 10.5 works great. I stop it and start 11 and the VEGA 56 is not shown when miner initializes. Any thoughts? - Esr

on: August 17, 2017, 03:42:46 AM

Quote from: TechPark on August 16, 2017, 09:42:41 PM Quote from: token_coin_guy on August 16, 2017, 02:53:55 PM updated to 17.7.2 and 9.8 and I cannot keep memory clock at 2045 where I usually keep it.. it keeps bouncing 2045 to 1000 and back to 2045 as a result my hash rate is saw tooth even on my pool page. evn in wattman, the slider is not able to be set to a static value.. seems greyed out. I installed with DDU to clear old drivers, I also tried upgrading to the new beta drivers and no fix. it was fine prior to upgrading to 17.7.2 Has anyone else come across this issue? ASUS ROG Strix Radeon RX 580 -Not 17.7.2 but CRIMSON BETA Had the same issue when using 17.7.2 drivers. Went back to 17.4.4 where it was running before with no issues mining ETH.

Pages: [1]