Latest posts of: ismail-uk

Show Posts
Pages: [1] 2 »

Economy / Service Discussion / Re: AdvCash debit card - bitcoin transfer - withdraw GBP cash

on: February 26, 2018, 01:54:39 PM

Quote from: cc120 on June 06, 2017, 09:37:51 AM Hi Bitcoin Forum Members I have bitcoin in blockchain and the aim is to withdraw GBP cash via AdvCash.com card as it costs only £4.99 with no monthly charge. I'm in the UK. Can you walk me through the most efficient or / and the cheapest way of doing this please? Also, there is a choice to select either usd or euro when ordering the AdvCash card, which should I select? Should I exchange in Payeer, bitcoin to GBP? Are you still able to withdraw GBP from advcash? I have loaded advcash and i am looking for solutions from advcash. Look like they like to receive only and doesnt have solutions to withdraw at the moment. Thanks

Alternate cryptocurrencies / Mining (Altcoins) / Re: Electroneum FAILS dk2an0 failed -4

on: February 22, 2018, 02:37:00 PM

castxmr now is working with each speed 720 to 750 h/s last 1 hour without problem.I hope will work like to so forever. i am using electroneum.com wallet but look like nothing come out to wallet yet

Alternate cryptocurrencies / Mining (Altcoins) / Re: Electroneum FAILS dk2an0 failed -4

on: February 22, 2018, 01:46:15 PM

i think start working now with castxmr little bit and gone again [13:44:21] GPU0 Found Nonce, submitting... [13:44:22] Share Accepted -> +1 [13:44:22] Shares: 1 Accepted, 0 Errors \| Hash Rate Avg: 4964.8 H/s \| Avg Search Time: 0.0 sec [13:44:23] GPU0 \| 43°C \| Fan 2813 RPM \| 720.9 H/s [13:44:23] GPU6 \| 28°C \| Fan 2777 RPM \| 729.4 H/s [13:44:23] GPU1 \| 44°C \| Fan 2618 RPM \| 728.0 H/s [13:44:24] GPU3 \| 44°C \| Fan 2761 RPM \| 752.1 H/s [13:44:24] GPU2 \| 43°C \| Fan 2783 RPM \| 748.5 H/s [13:44:25] GPU5 \| 46°C \| Fan 2830 RPM \| 752.6 H/s [13:44:25] GPU4 \| 40°C \| Fan 2815 RPM \| 750.7 H/s [13:44:27] GPU6 \| 28°C \| Fan 2774 RPM \| 727.1 H/s [13:44:27] GPU0 \| 43°C \| Fan 2814 RPM \| 721.0 H/s [13:44:27] GPU1 \| 45°C \| Fan 2612 RPM \| 726.1 H/s [13:44:28] GPU3 \| 44°C \| Fan 2757 RPM \| 749.8 H/s [13:44:28] GPU2 \| 43°C \| Fan 2787 RPM \| 748.0 H/s [13:44:29] GPU5 \| 46°C \| Fan 2821 RPM \| 750.9 H/s [13:44:29] GPU4 \| 40°C \| Fan 2820 RPM \| 749.1 H/s [13:44:31] GPU6 \| 28°C \| Fan 2775 RPM \| 726.9 H/s [13:44:31] GPU0 \| 44°C \| Fan 2814 RPM \| 719.8 H/s [13:44:31] GPU1 \| 45°C \| Fan 2624 RPM \| 722.9 H/s [13:44:32] GPU3 \| 45°C \| Fan 2757 RPM \| 749.4 H/s [13:44:32] GPU2 \| 44°C \| Fan 2770 RPM \| 749.3 H/s [13:44:33] GPU5 \| 46°C \| Fan 2821 RPM \| 749.8 H/s [13:44:33] GPU4 \| 40°C \| Fan 2820 RPM \| 748.0 H/s [13:44:39] GPU6 \| 28°C \| Fan 2772 RPM \| 725.2 H/s [13:44:39] GPU1 \| 45°C \| Fan 2624 RPM \| 722.4 H/s [13:44:39] GPU0 \| 44°C \| Fan 2813 RPM \| 719.5 H/s [13:44:39] GPU3 \| 45°C \| Fan 2761 RPM \| 748.5 H/s [13:44:39] GPU2 \| 44°C \| Fan 2787 RPM \| 746.1 H/s [13:44:39] GPU5 \| 47°C \| Fan 2826 RPM \| 749.3 H/s [13:44:39] GPU4 \| 40°C \| Fan 2820 RPM \| 747.2 H/s Caught signal 2 quitting... GPU stopped... done.Terminate batch job (Y/N)?

Alternate cryptocurrencies / Mining (Altcoins) / Re: Electroneum FAILS dk2an0 failed -4

on: February 22, 2018, 01:39:38 PM

Quote from: Set Ready Go on February 22, 2018, 01:20:16 PM Quote from: ismail-uk on February 22, 2018, 01:05:55 PM PU4, OpenCL error -4 (0) - cannot create DAG on GPU GPU3, OpenCL error -4 (0) - cannot create DAG on GPU GPU6, OpenCL error -4 (0) - cannot create DAG on GPU GPU1, OpenCL error -4 (0) - cannot create DAG on GPU GPU0, OpenCL error -4 (0) - cannot create DAG on GP Hey. Have you set virtual memory to 16gb atleast in windows? i have 8gb memory and virtual memory is min 8192 and max 16384 i setup before.

Alternate cryptocurrencies / Mining (Altcoins) / Re: Electroneum FAILS dk2an0 failed -4

on: February 22, 2018, 01:05:55 PM

PU4, OpenCL error -4 (0) - cannot create DAG on GPU GPU3, OpenCL error -4 (0) - cannot create DAG on GPU GPU6, OpenCL error -4 (0) - cannot create DAG on GPU GPU1, OpenCL error -4 (0) - cannot create DAG on GPU GPU0, OpenCL error -4 (0) - cannot create DAG on GP

Alternate cryptocurrencies / Mining (Altcoins) / Re: Electroneum FAILS dk2an0 failed -4

on: February 22, 2018, 01:00:47 PM

Quote from: rysioslaw on February 22, 2018, 12:31:31 PM I had the same problem, now I'm using NsGpuCNMiner. Working good and fast. this software giving dk2an0 error on me can u able to share code with me please? i tired with claymore v10 thanks

Alternate cryptocurrencies / Mining (Altcoins) / Re: Electroneum FAILS dk2an0 failed -4

on: February 22, 2018, 12:05:07 PM

12:02:59] Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0. [12:02:59] Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0 now giving this error. my telegram is : @ismaililgin Thanks

Alternate cryptocurrencies / Mining (Altcoins) / Re: Electroneum FAILS dk2an0 failed -4

on: February 22, 2018, 11:40:10 AM

Quote from: Permonik on February 21, 2018, 05:47:07 PM Just one question. Are you using windows7? no i am using windows 10 for both rigs. Also i dont know how to delete opencl

Alternate cryptocurrencies / Mining (Altcoins) / Re: Electroneum FAILS dk2an0 failed -4

on: February 21, 2018, 05:29:10 PM

Quote from: Permonik on February 21, 2018, 05:20:50 PM Quote from: ismail-uk on February 21, 2018, 05:12:14 PM Quote from: Permonik on February 21, 2018, 04:44:30 PM Hi, Yes, there are only two files. One is a miner itself and other one is your config. Just put in to the run file something like this: cast_xmr-vega --help cast_xmr-vega -S pool.electroneum.space:7777 -u yourWallet -p x %* --opencl 0 -G 0,1,2,3,4,5,6,7 --fastjobswitch Opencl you have to find which one is it. It could be 0 1 2 3 and so on... -G parameter and numbers are just GPUs which you want to dedicated for the mining. cast_xmr-vega --help cast_xmr-vega -S pool.electroneum.space:7777 -u yourWallet -p x %* --opencl 0 -G 7 --fastjobswitch so like that can be work is it? i have 7 gpu its working now. for opencl where i will find this info from? Thanks Hi, the parameter -G must be according to the each gpu. So it will be (if you have 7gpus) -G 0,1,2,3,4,5,6 And for opencl just leave 0 for the first time. And write what happend. Now i did like bellow but same error comes up cast_xmr-vega --help cast_xmr-vega -S pool.electroneum.space:7777 -u etnjzNf5525eAmB3sTPgo8ja4MWwLP4ks8K9tVHX76WRXca8HPFq63GjmQmpmpejh4LKTmAAPzEw8UW 755n1hSTY6GpYWbVvXt -p x %* --opencl 0 -G 0,1,2,3,4,5,6 --fastjobswitch

Alternate cryptocurrencies / Mining (Altcoins) / Re: Electroneum FAILS dk2an0 failed -4

on: February 21, 2018, 05:19:30 PM

i did like that but no luck cast_xmr-vega --help cast_xmr-vega -S pool.electroneum.space:7777 -u etnjzNf5525eAmB3sTPgo8ja4MWwLP4ks8K9tVHX76WRXca8HPFq63GjmQmpmpejh4LKTmAAPzEw8UW 755n1hSTY6GpYWbVvXt -p x %* --opencl 1 -G 7 --fastjobswitch

Alternate cryptocurrencies / Mining (Altcoins) / Re: Electroneum FAILS dk2an0 failed -4

on: February 21, 2018, 05:12:14 PM

Quote from: Permonik on February 21, 2018, 04:44:30 PM Hi, Yes, there are only two files. One is a miner itself and other one is your config. Just put in to the run file something like this: cast_xmr-vega --help cast_xmr-vega -S pool.electroneum.space:7777 -u yourWallet -p x %* --opencl 0 -G 0,1,2,3,4,5,6,7 --fastjobswitch Opencl you have to find which one is it. It could be 0 1 2 3 and so on... -G parameter and numbers are just GPUs which you want to dedicated for the mining. cast_xmr-vega --help cast_xmr-vega -S pool.electroneum.space:7777 -u yourWallet -p x %* --opencl 0 -G 7 --fastjobswitch so like that can be work is it? i have 7 gpu its working now. for opencl where i will find this info from? Thanks

Alternate cryptocurrencies / Mining (Altcoins) / Re: Electroneum FAILS dk2an0 failed -4

on: February 21, 2018, 04:15:16 PM

Quote from: Permonik on February 21, 2018, 03:51:39 PM Hi, Please, try to use castxmr instead of claymore. This miner is very stable and you will get higher hashrate. For 580 is for sure. For the older gpus, I am not sure... i download castxmr this morning but its give me only 2 file inside? didnt use this castxmr before. Any video for how to setup this? Thanks

Alternate cryptocurrencies / Mining (Altcoins) / Re: Help in mining Electroneum with claymore

on: February 21, 2018, 03:55:40 PM

Quote from: manolais on December 13, 2017, 02:30:32 AM Try adding -dmem 0 where we will entry this to below? Thanks GPU_FORCE_64BIT_PTR 1 GPU_MAX_HEAP_SIZE 100 GPU_USE_SYNC_OBJECTS 1 GPU_MAX_ALLOC_PERCENT 100 GPU_SINGLE_ALLOC_PERCENT 100 NsGpuCNMiner.exe -xpool stratum+ssl://etn-eu1.nanopool.org:13433 -xwal MYWALETADDRESS.MYEMAILADDRESS -xpsw x -allpools 1

Alternate cryptocurrencies / Mining (Altcoins) / Electroneum FAILS dk2an0 failed -4

on: February 21, 2018, 02:39:25 PM

Hi Everyone firstly thanks for spare time to read my post. If anyone help me to makes works i will send 1 ETC for it. i am trying to mine Electroneum but am getting error code " dk2an0" Using Claymore CryptoNote AMD GPU Miner v10.2 Beta - POOL My first rig is : 8x rx580 8gb secong rig : 9x r9 390 8gb GPU_FORCE_64BIT_PTR 1 GPU_MAX_HEAP_SIZE 100 GPU_USE_SYNC_OBJECTS 1 GPU_MAX_ALLOC_PERCENT 100 GPU_SINGLE_ALLOC_PERCENT 100 NsGpuCNMiner.exe -xpool stratum+ssl://etn-eu1.nanopool.org:13433 -xwal MYWALETADDRESS.MYEMAILADDRESS -xpsw x -allpools 1

Economy / Digital goods / USD ADVCASH SALE

on: February 20, 2018, 05:00:12 PM

Hi everyone i have advcash to sell always $100 to $50000 if anyone need it can contact with me. Thanks

Alternate cryptocurrencies / Mining (Altcoins) / Anyone has MOD for Red Dragon Rx580 8gb

on: January 11, 2018, 03:16:10 PM

Hi Everyone i have Powercolor Red Dragon Rx580 ,8gb right now is working 20 mh/s , i searched every where but couldn't find correct bios modding to incrase to 30+mh/s Anyone has this bios mod? Anyone can help? Thanks

Alternate cryptocurrencies / Mining (Altcoins) / Re: R9 ,390 DRIVER PROBLEM

on: October 11, 2017, 12:53:06 PM

Quote from: 0xcosmos on October 11, 2017, 07:29:51 AM Quote from: rumputyangbergoyang on October 08, 2017, 09:37:19 PM can i mining with gtx 1070? how much i get perday if i mining with single gpu? im really new to mining, actualy i build this pc for gaming, but i wanna mining to if i can. try nicehash good place to start you will get earnings per day and all statistics Also i tired nicehash yesterday, its finish testing for 8 cards with benchmark but using only 2 card for mining. Any reason for this?

Alternate cryptocurrencies / Mining (Altcoins) / Re: R9 ,390 DRIVER PROBLEM

on: October 10, 2017, 04:40:39 PM

Quote from: kepler on October 08, 2017, 06:28:30 PM Hello, i had same issues with 390 series. You need to remove drivers by AMD Clean Uninstall Utility Then install AMD driver 15.12 version Then plug-in HDMI or orher video cable in first big PCI-e slot. Try this! Thank you i will try tomorrow.

Alternate cryptocurrencies / Mining (Altcoins) / R9 ,390 DRIVER PROBLEM

on: October 08, 2017, 05:19:05 PM

Hi everyone I got 6 r9 390 series gpu and just today problem start.I just install fresh windows installations.Used driver before had a problem but when i install driver, gpu not showing any display so i uninstall driver with DDU and install bellow drivers but all of them gave me same issue. After install driver couldn't get display anymore. [Guru3D.com]-Non-WHQL-Win10-64Bit-Radeon-Software-Crimson-16.11.5-Nov25 [Guru3D.com]-whql-win10-64bit-radeon-software-crimson-relive-17.1.2-feb6 Non-WHQL-Win10-64Bit-Radeon-Software-Crimson-16.9.2-Sep21 whql-radeon-software-crimson-relive-17.9.3-win10-64bit-oct2 I hope someone can help about it Thanks

Alternate cryptocurrencies / Mining (Altcoins) / Re: One way to undervolt R9 300 series cards by BIOS mod

on: September 20, 2017, 10:20:51 PM

Hi Everyone before open a topic i checked here does have any bios mod or not. Found only 1 of them which is not working/ I bought 8 r9, 390 ,8gb card and i need mod. Right now without modding i am getting 30-31 mhz but what i heard it can be push around 35-40. Also i can use one mod for all card or all card need own mod bios? I have bellow cards 1x Gigabyte Windforce 1x MSI AMD Radeon R9 390X 8GB 3 x ASUS STRIX R9 390 DC3OC 8GB GDDR5 1x POWERCOLOR R9 390 8GB 1X SAPPHIRE NITRO R9 390 8GB 1X MSI R9 390 8GB I hope someone can help me. Thanks

Pages: [1] 2 »