 Show Posts
|
|
Pages: [1]
|
Having trouble running Bminer under HiveOS on Sparkpool. i dunno why it won't run. weird thing is: - Bminer on ethermine is OK
Phoenixminer on ethermine is OK
Phoenixminer on sparkpool is OK
But,
Bminer on sparkpool FAIL
here's the log:  |
|
|
|
|
2
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: NBMiner v31.1, GPU Miner for ETH, RVN, GRIN, AE, BTM, SERO, HNS, BFC, SIPC, TRB
|
on: August 13, 2020, 05:01:33 AM
|
|
what is the -mt for gtx 1080 ti ?
|
|
|
|
tried it works, i disabled ethpill too. although, i was expecting i'm getting more hashrate out of this. is there anything else we can tweak to get more out of it? how about the parameters? -straps <n> Memory strap level (Nvidia cards 10x0 series only). The possible values are 0 to 6. 0 is the default value and uses the default timings from the VBIOS. Each strap level corresponds to a predefined combination of memory timings ("-vmt1", "-vmt2", "-vmt3", "-vmr"). Strap level 3 is the fastest predefined level and may not work on most cards, 1 is the slowest (but still faster than the default timings). Strap levels 4 to 6 are the same as 1 to 3 but with less aggressive refresh rates (i.e. lower "-vmr" values). -vmt1 <n> Memory timing parameter 1 (0 to 100, default 0) -vmt2 <n> Memory timing parameter 2 (0 to 100, default 0) -vmt3 <n> Memory timing parameter 3 (0 to 100, default 0) -vmr <n> Memory refresh rate (0 to 100, default 0) can you explain how to define these numbers? i can see that -straps 2 predefine vmt1=66 vmt2=66 vmt3=0 vmr=37 can we tweak these to give better result? i tested vmt1=100 vmt2=100 vmt3=100 vmr=37, it ended up crashing. Try to change them not such radically. F.e. vmt1=75 vmt2=75 vmt3=0 vmr=37 vmt1=85 vmt2=85 vmt3=0 vmr=37 what is vmt3? why is it 0? even vmt1=67 vmt2=67 vmt3=0 vmr=37 crashes my GPU. so at the moment i stick to the predefined numbers, vmt1=66 vmt2=66 vmt3=0 vmr=37. i still don't understand what is vmt3? |
|
|
|
|
what is vmt3? why is it 0?
|
|
|
|
tried it works, i disabled ethpill too. although, i was expecting i'm getting more hashrate out of this. is there anything else we can tweak to get more out of it? how about the parameters? -straps <n> Memory strap level (Nvidia cards 10x0 series only). The possible values are 0 to 6. 0 is the default value and uses the default timings from the VBIOS. Each strap level corresponds to a predefined combination of memory timings ("-vmt1", "-vmt2", "-vmt3", "-vmr"). Strap level 3 is the fastest predefined level and may not work on most cards, 1 is the slowest (but still faster than the default timings). Strap levels 4 to 6 are the same as 1 to 3 but with less aggressive refresh rates (i.e. lower "-vmr" values). -vmt1 <n> Memory timing parameter 1 (0 to 100, default 0) -vmt2 <n> Memory timing parameter 2 (0 to 100, default 0) -vmt3 <n> Memory timing parameter 3 (0 to 100, default 0) -vmr <n> Memory refresh rate (0 to 100, default 0) can you explain how to define these numbers? i can see that -straps 2 predefine vmt1=66 vmt2=66 vmt3=0 vmr=37 can we tweak these to give better result? i tested vmt1=100 vmt2=100 vmt3=100 vmr=37, it ended up crashing. |
|
|
|
tried it works, i disabled ethpill too. although, i was expecting i'm getting more hashrate out of this. is there anything else we can tweak to get more out of it? how about the parameters? |
|
|
|
how do you use this -vmt1 -vmt2 -vmt3 -vmr -nvmem?
i'm using Nvidia GTX 1080 TI, with GDDR5X VRAM, so i guess -nvmem 2 is correct? i tried, but it still gives 30 mh/s. should be around 50 mh/s if it is configured correctly, right?
Same thing here on my 1080ti (GDR5X), using this -nvmem 2 does not change anything, still 35 mh/s How do you get 50 mh/s on this card ? yeah, waiting for the developer answer this. |
|
|
|
|
how do you use this -vmt1 -vmt2 -vmt3 -vmr -nvmem?
i'm using Nvidia GTX 1080 TI, with GDDR5X VRAM, so i guess -nvmem 2 is correct? i tried, but it still gives 30 mh/s. should be around 50 mh/s if it is configured correctly, right?
|
|
|
|
please add MTP algorithm  |
|
|
|
|
suatu saat Bitcoin bisa dan akan dilegalkan. apalagi kalau pemerintah mau regulasikan, di mana pengusaha bisa menerima Bitcoin sebagai alat tukar dengan syarat kode wallet nya harus didaftar di kantor pajak. dengan begitu, akan sangat mudah bagi perpajakan untuk melihat transaksi yang dilakukan. lebih mudah melacak siapa saja yang mendompleng uang pajak. dibandingkan transaksi tunai, yang bisa saja tidak dilaporkan sama sekali, ataupun transaksi perbankan, yang membutuhkan prosedur panjang dan surat perintah pengadilan, untuk dilakukan pengecekan.
nah, kalopun misalnya alasannya, si penjual mengganti kode wallet, hal ini jg bisa ketahuan, dengan sekali-sekali melakukan sidak. berpura-pura menjadi pembeli, kemudian lakukan tracking coin yang ditransaksikan, kalo tidak masuk ke wallet yang terdaftar, berarti penjual telah melanggar peraturan yang sudah ditentukan.
tentu, dibalik kelebihannya, ada kekurangannya juga. bitcoin yang didompleng pajaknya, tidak bisa disita maupun dibekukan. dan saya yakin, ini adalah salah satu alasan mengapa bitcoin belum dilegalkan. jadi, dalam hal ini, pemerintah hanya bisa menghukum si pendompleng pajak dengan hukuman kurungan penjara, dan menyita aset lainnya berupa properti, saham, dsb yang memiliki fisik.
|
|
|
|
Website: http://simplemining.net What is SimpleMining OS (SMOS) ?It is nice looking and easy Operating system for mining on AMD GPUs Most wanted info:- idea is simple: download for free my OS and write it to any drive: Hard / SSD / even USB drive - after that you just enter your email address in config.txt file and boot your rig - login to simplemining.net dashboard using the same email and start managing your rig  - you can test it for free and then you need to pay only 2$ per rig per month - if there will be new miner i will implement it fast with auto-updates system Requirements:- R OS = AMD GPUs R300/R200/HD7xxx series - RX OS = AMD GPUs RX400/RX500 series - NV OS = Nvidia GPUs (alsmost all of them) - hard drive / ssd / usb drive - it must be 7GB or bigger - at least 1-4GB system memory (depend how much GPUs are you using and what miner) About me- I am linux admin for about 13 years and crypto miner for 5 years - Linux, programming, scripting, mining are my hobbies - i am honest and simple IT guy who whants to make world better and give something to it Video
please add dstm equihash miner for NV OS |
|
|
|
|
i have 8GB RAM single channel DDR4 and 18 of NVIDIA GTX 1080TI
somehow my ASUS Mining Expert board won't let me boot on the 14th GPU, do i have to add more RAM? or is it just really can't support 18 of GTX 1080 TI?
|
|
|
|
how many NVIDIA GTX 1080 TI can this OS run? with Asus Mining Expert 19 GPU slots motherboard.  |
|
|
|
|
Would you add graphical statistic for every variables (on http api) ?
Temp - Power - Speed - Efficiency - Accepted - Rejected - and even DevFree Share.
It would be very helpful for miner, and we could use those graphs to compare what we see on pool's graphs.
|
|
|
|
|
