Don't forget to utilize the 4-pin molex connectors. You can usually get 2x 4 pin to 1x 6 pin PCIe power adapters for a few bucks each.
For example:
https://www.amazon.com/Cable-Matters-2-Pack-Molex-Power/dp/B01DV1Z22KYou can safely use this with 2x 4-pin molex connectors on one string, then use them to power one riser.
Additionally, if you buy a new modular EVGA PSU, their customer service is pretty nice about sending free extra cables (to a reasonable limit), at least in my experience. The SATA and Peripheral ports on the PSU end can be used for either purpose, so you could substitute a string of molex connectors for SATA. (Don't mix cables from different modular PSUs, however.)
So if I would use PSU 4-pin molex to the 6-pin input riser:
- What PSU plug would this use? (output would be molex ofc!?)
- would the PSU to two 4-pin molex adapter use one cable per riser right?
So I got basically the following set-up?:
Could you answer and help me with the
= *...* ? (Because I'm not sure if I can use one cable to power more than one "thing")
one PSU:
- three 6+2 pin cables -> 3 GPU (one per GPU) =
using how many and which (PIN) PSU slots?- three 6-pin cables -> 3 GPU (one per GPU) =
using how many and which (PIN) PSU slots?- three 6-pin riser (throwing sata adapter in trash)
- three 6-pin to two 4-pin molex adapter =
using how many and which (PIN) PSU slots?=total of nine? slots I need at each PSU? three 6+2 and six 6-pin?
Which PSU do you recommend?I filtered some products, I might have done it wrong maybe you could set me a correct filter for this set-up.
/9KoZaj]https://[Suspicious link removed]/9KoZaj
Show Posts
