 Show Posts
|
|
Pages: [1]
|
|
Excellent - highly recommended 5*
|
|
|
|
i have EVGA 1080ti and 2 1080TI Aorus xtreme
i need good timing pls... any pls help?
All gtx 1000 series it is not possible to change bios, hence you can change timings there i mean timing in MSI afterburn please |
|
|
|
Any suggestions to improve my settings?
yes, there is one : use another miner  in fact, if search the forum with this words "hsr miner" you will find a miner which is capable to push 1800kh/s from gtx 1080 ti which is 23% better then your result is this improvement looks good enough for you? TRUE, 2x1080TI Aorus xtreme WB : https://imgur.com/a/vczkOwhat timing pls? i have EVGA 1080ti and 2 1080TI Aorus xtreme i need good timing pls... any pls help? |
|
|
|
Hate to break it to a few people but there is already a no dev fee version of 1.12v floating around out there, and after testing it I can confirm it fixes the issues where the miner switches to dev fee then fails to connect properly back to the user pool.  Can you pls pm me the link? |
|
|
|
after running my two d3's with 400Mhz since 2 Days, im getting tousands of HW in a few hours.
i rised the voltage already to 2 but its dont getting better.
but it dont affects the hashrate or the asics, so can i keep it running or should i rise the voltage further?
try to set default voltage (13) to test then lower 2 by 2 to see ... whats your ambiant temp ? if you have less than 12~15 hw / hour it s ok yeah i rised the voltage to 3 and see what happens, if needed i go further. my ambient temp.... they stay in a basement and i think its somewhere between 15 an 20°C and i placed a little vent in front of them the chiptemps are between 64 and 72°C Yeah. I think next year she can become a great miner, but it's complicated. I spent a lot of money on an investment that was great, but it fell so deep that it totally discouraged. And now these defective badges have discouraged me even more ... Now I do not know if I get that bad shit or if I wrap it up for them to fix. The problem is that they never reply to me in the support, and when they respond, I just send CTRL + C and CTRL + V, it's complicated. I will try to test the reset button you said ... It's a very small hole that stays in the machine right? do a factory reset and re-flash the firmware again |
|
|
|
23/11 Blissz is working great:
Frequency = default 487
Voltage = 9
Hashrate = 17100 MH/z
Fan = Performance auton (4020rpm)
PCB temp = 55-57c
Chip temp = 71-71c
HW = 0
I'm wondering what makes temp rise above stock (65c) while under volting and stock clock? Hashrate is about the same with stock firmware.
whats your watts? |
|
|
|
Hi Blissz 1) on version from 21/11 for some reason i dont have your logo Here are my parameters on overclocking Voltage to max, fan speed 100% frequency 650 mhz https://imgur.com/a/dCJx4U goona burn it pretty fast like dat  check mine - https://imgur.com/a/RrAYh - stable what power usage mate? |
|
|
|
23/11 test UPDATE (2)Hi guys, I need some feedback on this version before I put it to the topic start. It adds quite some experimental features, so please let me know if it works ok for you or not.
https://mega.nz/#!nlRjQJQR!QSLT_LCz6JAeUdzX4vHtz2aI5Kr1i724TrZLLGaXzYk
Changes 23/11: (compared to 21/11)- fast mining startup after changing settings / reboot (~19 seconds vs ~50 seconds in the previous firmwares). Safes you some time when experimenting with settings. - adds the reboot on low hashrate option (checks every 2 minutes and kicks in when the hashrate is measured below 88% of the expected hashrate) - ~ 1% improvement on effective average hashrate *jeeej* - fixed flash upgrade speed to new versions - added AUTO FAN profiles. The default profile is the one that's in since the start, the performance is more like the stock bitmain auto fan profile and the silent profile keeps things nice and quiet. Manual mode is for setting a static fan speed.
know issues:- switching pools can sometimes cause the miner to wait for work for 10 seconds. happy mining! Hi i know this question has been asked many times but i will ask directly mate what are the chances of making this miner work with other algo ? the reason I ask is that I'm getting D3 end of this month and the current profitability is so poor that I'm thinking of just getting rid of it.... thank you |
|
|
|
ok gyus some good news: crimson-relive-17.10.2-oct23 driver is 1) more stable than the blockchain drv (has the DAG fix that can be enabled with "compute" workload) 2) has proper API (no issues for setting up the volts with overdriven tool) 3) supports more then 8 AMD gpus on the same platform all good news indeed.  Well, i strongly disagree. My personal experience (and plenty of others) is completely opposite to yours 1) how can you even say that out loud? that driver is not even 7 days old  2) OverdriveNTool has been working just fine with blockchain drv (23aug) 3) yes, it let you post it in device manager and yes, it let you mine with it.. but do try enable compute workload and see that mess if you are running 12 cards! And loosing 4mh's per card with NO-dag-driver * 12 cards.. hell no ! Please stay away from such a comments, you are fooling others! Actually what Ursul0 cited is pretty factual, as I've experienced it myself. This driver, together with the Win10 FCU fixed my OpenCL issues - and i've tried everything under the sun to fix it. I used to use aug 23 blockchain driver and a recently-installed win10 pro without any updates. I only run 8 cards but here's some proof that's it's stable.  Previously with the setup above, miner doesn't get past 3 hours without openCL issues. It has the dag fix just like the blockchain drivers - and this version is fully-supported by AMD and not in Beta status. Note that you have to enable *compute* settings in each card in the Radeon Settings for this to work. whats your power usage mate? i got rx580s 8gb hynix and would love you know what your power usage is currently im running 6gpu @ 170MH - 790W |
|
|
|
|
can anyone pls provide a link to the latest version? the one i download from the website is v1118
many thanks
|
|
|
|
|
HI ALL
Can someone please upload the best config for my MSI RX 580 8GB Hynix
i really need someone help please all
many thanks in advance
|
|
|
|
|
when onboard Intel gpu is enabled, i cannot run the batch file - think people like me who have onboard enabled graphics and use gpus to mine should be able to allow to modify the batch file so we can mine using gpus... can you help suggest please?
|
|
|
|
Can someone please mod my MSI RX 580 8GB HYNIX? - im worried about modifying and killing my gpu  |
|
|
|
|
can someone pls recommend DASH coin pool for CPU miner please
|
|
|
|
maybe a noob question but can i directly mine using this software or is this just a monitoring application ?
Yes, you can directly mine using Awesome Miner. It has a lot of the most recent mining applications built in like the various flavors of Claymore, EWBF, CCMiner, Excavator, sgminer and more. It will also allow you to add in your own custom mining software if needed. You can also monitor and control some "external" miners, which are applications or rigs that are not directly controlled by Awesome Miner... like if you have an ASIC miner or a linux based miner. oo nice thanks for the clarification |
|
|
|
|
maybe a noob question but can i directly mine using this software or is this just a monitoring application ?
|
|
|
|
|
