 Show Posts
|
|
Pages: [1] 2 3 »
|
Puede haber un problema de DNS. Pruebe con una tercera pool y vea qué pasa.
Tenias razón bro, era un problema de DNS, al parecer el proveedor de Internet que uso esta ejerciendo algún tipo de bloqueo, ya que al colocarle las DNS de Google al Router, esta comenzo a trabajar sin problemas, muy agradecido por tu ayuda hermano! |
|
|
|
El kernel log es bueno, por lo que este es un problema de red. Comprueba si puedes hacer ping al minero con la configuración predeterminada y luego otra vez a antpool. Es posible que el minero no pueda resolver la URL de Antpool mediante DNS. ¿Hay una sección de red en su configuración antminer?
Acá te anexo como se ve la parte de "Network" en el minero ---> https://prnt.sc/izuc5v |
|
|
|
Si te entendí correctamente, funciona con la configuración predeterminada, pero no en tu grupo específico. Copie el "kernel log" aquí para que podamos obtener más detalles. Asegúrese de que su minero tenga la configuración correcta de gateway y dns.
Así es, cuando lo reseteo, que queda el worker y pool por defecto, arranca sin problemas, incluso le doy reboot y mientras conserva esta configuración comienza a trabajar al momento, a su maxima potencia (2th) sin embargo cuando lo configuro con mi worker y la pool (uso antpool) el minero simplemente no arranca, el hardware version se queda en x.x.x.x y la version de cgminer queda en blanco, no arranca, con respecto a la configuración de la IP desde que lo compre siempre he usado DCHP, es la primera vez que me pasa esto te dejo el kernel log a continuación y muchas gracias! [ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 130816
[ 0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 129792 pages, LIFO batch:31
[ 0.000000] AM335X ES1.0 (neon )
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0b36000 s9408 r8192 d15168 u32768
[ 0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
[ 0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] allocated 1048576 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 511MB = 511MB total
[ 0.000000] Memory: 495532k/495532k available, 28756k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0612cf0 (6188 kB)
[ 0.000000] .init : 0xc0613000 - 0xc06554c0 ( 266 kB)
[ 0.000000] .data : 0xc0656000 - 0xc06cc020 ( 473 kB)
[ 0.000000] .bss : 0xc06cc020 - 0xc0725e3c ( 360 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000356] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[ 0.015409] pid_max: default: 32768 minimum: 301
[ 0.015645] Security Framework initialized
[ 0.015741] Mount-cache hash table entries: 512
[ 0.025664] Initializing cgroup subsys cpuacct
[ 0.025695] Initializing cgroup subsys memory
[ 0.025758] Initializing cgroup subsys blkio
[ 0.025904] CPU: Testing write buffer coherency: ok
[ 0.026444] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.026521] Setting up static identity map for 0x8038c820 - 0x8038c86c
[ 0.027905] Brought up 1 CPUs
[ 0.027930] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[ 0.029212] devtmpfs: initialized
[ 0.093772] pinctrl core: initialized pinctrl subsystem
[ 0.093989] rstctl core: initialized rstctl subsystem
[ 0.094483] regulator-dummy: no parameters
[ 0.094995] NET: Registered protocol family 16
[ 0.095759] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.105557] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 0.106336] platform 49000000.edma: alias fck already exists
[ 0.106368] platform 49000000.edma: alias fck already exists
[ 0.106396] platform 49000000.edma: alias fck already exists
[ 0.107603] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.107785] OMAP GPIO hardware version 0.1
[ 0.109127] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.110451] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.111916] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.112451] of_get_named_gpio_flags exited with status 52
[ 0.112481] gpio-rctrl rstctl.3: loaded OK
[ 0.117297] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[ 0.120549] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.122780] cpsw.0: No hwaddr in dt. Using 78:a5:04:cf:9c:eb from efuse
[ 0.122861] cpsw.1: No hwaddr in dt. Using 78:a5:04:cf:9c:ed from efuse
[ 0.138307] bio: create slab <bio-0> at 0
[ 0.150462] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[ 0.150697] of_get_named_gpio_flags: can't parse gpios property
[ 0.150912] vmmcsd_fixed: 3300 mV
[ 0.153962] SCSI subsystem initialized
[ 0.154448] usbcore: registered new interface driver usbfs
[ 0.154581] usbcore: registered new interface driver hub
[ 0.154866] usbcore: registered new device driver usb
[ 0.156945] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 0.158468] input: tps65217_pwr_but as /devices/ocp.2/44e0b000.i2c/i2c-0/0-0024/input/input0
[ 0.160195] DCDC1: at 1500 mV
[ 0.161345] vdd_mpu: 925 <--> 1325 mV at 1325 mV
[ 0.162544] vdd_core: 925 <--> 1150 mV at 1100 mV
[ 0.163644] LDO1: at 1800 mV
[ 0.164775] LDO2: at 3300 mV
[ 0.166708] LDO3: 1800 mV
[ 0.167860] LDO4: at 3300 mV
[ 0.168847] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 0.169548] omap_i2c 44e0b000.i2c: unable to select pin group
[ 0.170342] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
[ 0.172668] omap_i2c 4819c000.i2c: unable to select pin group
[ 0.172908] media: Linux media interface: v0.10
[ 0.173011] Linux video capture interface: v2.00
[ 0.173135] pps_core: LinuxPPS API ver. 1 registered
[ 0.173151] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.174021] Advanced Linux Sound Architecture Driver Initialized.
[ 0.175187] Switching to clocksource gp_timer
[ 0.193414] NET: Registered protocol family 2
[ 0.194423] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.194565] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
[ 0.194727] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.194885] TCP: reno registered
[ 0.194914] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.194960] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.195376] NET: Registered protocol family 1
[ 0.195942] RPC: Registered named UNIX socket transport module.
[ 0.195963] RPC: Registered udp transport module.
[ 0.195977] RPC: Registered tcp transport module.
[ 0.195991] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.196363] Trying to unpack rootfs image as initramfs...
[ 2.121590] Freeing initrd memory: 14756K
[ 2.122260] CPU PMU: probing PMU on CPU 0
[ 2.122292] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 2.122916] omap2_mbox_probe: platform not supported
[ 2.126825] VFS: Disk quotas dquot_6.5.2
[ 2.127061] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.128331] NFS: Registering the id_resolver key type
[ 2.128492] Key type id_resolver registered
[ 2.128510] Key type id_legacy registered
[ 2.128581] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 2.129037] msgmni has been set to 996
[ 2.131807] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.131832] io scheduler noop registered
[ 2.131848] io scheduler deadline registered
[ 2.131901] io scheduler cfq registered (default)
[ 2.133706] tps65217-bl tps65217-bl: no platform data provided
[ 2.133747] tps65217-bl: probe of tps65217-bl failed with error -22
[ 2.134717] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.137343] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[ 2.137633] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[ 2.855015] console [ttyO0] enabled
[ 2.859863] [drm] Initialized drm 1.1.0 20060810
[ 2.878507] brd: module loaded
[ 2.888789] loop: module loaded
[ 2.892243] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.899530] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.906802] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.914068] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.921337] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.960469] bone-capemgr bone_capemgr.8: bone: scan failed (1 time)
[ 3.499532] bone-capemgr bone_capemgr.8: bone: scan failed (2 time)
[ 4.038589] bone-capemgr bone_capemgr.8: bone: scan failed (3 time)
[ 4.577650] bone-capemgr bone_capemgr.8: bone: scan failed (4 time)
[ 5.116712] bone-capemgr bone_capemgr.8: bone: scan failed (5 time)
[ 5.655774] bone-capemgr bone_capemgr.8: bone: scan failed (6 time)
[ 6.194840] bone-capemgr bone_capemgr.8: bone: scan failed (7 time)
[ 6.733899] bone-capemgr bone_capemgr.8: bone: scan failed (8 time)
[ 7.272965] bone-capemgr bone_capemgr.8: bone: scan failed (9 time)
[ 7.812025] bone-capemgr bone_capemgr.8: bone: scan failed (10 time)
[ 8.320006] bone-capemgr bone_capemgr.8: Failed to scan baseboard eeprom
[ 8.327075] bone-capemgr: probe of bone_capemgr.8 failed with error -110
[ 8.336612] nand_get_flash_type: 00,00 against 00,00
[ 8.341904] No NAND device found
[ 8.345390] OneNAND driver initializing
[ 8.352692] edma-dma-engine edma-dma-engine.0: allocated channel for 0:17
[ 8.359989] edma-dma-engine edma-dma-engine.0: allocated channel for 0:16
[ 8.370264] edma-dma-engine edma-dma-engine.0: allocated channel for 0:43
[ 8.377555] edma-dma-engine edma-dma-engine.0: allocated channel for 0:42
[ 8.386794] usbcore: registered new interface driver asix
[ 8.392641] usbcore: registered new interface driver cdc_ether
[ 8.398920] usbcore: registered new interface driver smsc95xx
[ 8.405043] usbcore: registered new interface driver net1080
[ 8.411063] usbcore: registered new interface driver cdc_subset
[ 8.417351] usbcore: registered new interface driver zaurus
[ 8.423410] usbcore: registered new interface driver cdc_ncm
[ 8.430122] usbcore: registered new interface driver cdc_acm
[ 8.436079] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 8.444457] Initializing USB Mass Storage driver...
[ 8.449693] usbcore: registered new interface driver usb-storage
[ 8.455995] USB Mass Storage support registered.
[ 8.461024] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 8.467715] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[ 8.472954] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 8.481719] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 8.481740] musb-hdrc: MHDRC RTL version 2.0
[ 8.481756] musb-hdrc: setup fifo_mode 4
[ 8.481785] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 8.481965] musb-hdrc musb-hdrc.0.auto: *** mode=3
[ 8.487003] musb-hdrc musb-hdrc.0.auto: *** power=250
[ 8.492988] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[ 8.498234] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 8.506996] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 8.507016] musb-hdrc: MHDRC RTL version 2.0
[ 8.507030] musb-hdrc: setup fifo_mode 4
[ 8.507053] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 8.507212] musb-hdrc musb-hdrc.1.auto: *** mode=1
[ 8.512253] musb-hdrc musb-hdrc.1.auto: *** power=250
[ 8.517560] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 8.523936] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[ 8.532171] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[ 8.532282] usb usb1: default language 0x0409
[ 8.532340] usb usb1: udev 1, busnum 1, minor = 0
[ 8.532364] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.539490] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.547060] usb usb1: Product: MUSB HDRC host driver
[ 8.552274] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[ 8.557939] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 8.563800] usb usb1: usb_probe_device
[ 8.563828] usb usb1: configuration #1 chosen from 1 choice
[ 8.563891] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 8.564179] hub 1-0:1.0: usb_probe_interface
[ 8.564202] hub 1-0:1.0: usb_probe_interface - got id
[ 8.564230] hub 1-0:1.0: USB hub found
[ 8.568241] hub 1-0:1.0: 1 port detected
[ 8.572378] hub 1-0:1.0: standalone hub
[ 8.572398] hub 1-0:1.0: individual port power switching
[ 8.572417] hub 1-0:1.0: no over-current protection
[ 8.572434] hub 1-0:1.0: Single TT
[ 8.572455] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 8.572475] hub 1-0:1.0: power on to power good time: 10ms
[ 8.572519] hub 1-0:1.0: local power source is good
[ 8.572624] hub 1-0:1.0: enabling power on all ports
[ 8.573792] mousedev: PS/2 mouse device common for all mice
[ 8.582003] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 8.589485] 44e3e000.rtc: already running
[ 8.593974] i2c /dev entries driver
[ 8.599388] pps_ldisc: PPS line discipline registered
[ 8.604848] Driver for 1-wire Dallas network protocol.
[ 8.612115] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 8.619677] cpuidle: using governor ladder
[ 8.623999] cpuidle: using governor menu
[ 8.628589] of_get_named_gpio_flags exited with status 6
[ 8.628609] of_get_named_gpio_flags: can't parse gpios property
[ 8.628625] of_get_named_gpio_flags: can't parse gpios property
[ 8.628663] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[ 8.635879] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[ 8.642678] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[ 8.649912] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[ 8.657242] mmc.4 supply vmmc_aux not found, using dummy regulator
[ 8.664181] omap_hsmmc mmc.4: pins are not configured from the driver
[ 8.673478] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 8.697398] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.7
[ 8.709118] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.7) status -22
[ 8.716417] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
[ 8.725446] leds-gpio gpio-leds.7: pins are not configured from the driver
[ 8.732685] of_get_named_gpio_flags exited with status 53
[ 8.732709] of_get_named_gpio_flags exited with status 54
[ 8.732732] of_get_named_gpio_flags exited with status 55
[ 8.732752] of_get_named_gpio_flags exited with status 56
[ 8.732788] of_get_named_gpio_flags exited with status 53
[ 8.733083] of_get_named_gpio_flags exited with status 54
[ 8.733295] of_get_named_gpio_flags exited with status 55
[ 8.733485] of_get_named_gpio_flags exited with status 56
[ 8.734095] ledtrig-cpu: registered to indicate activity on CPUs
[ 8.740891] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[ 8.748134] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 8.756615] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 8.762928] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[ 8.770173] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[ 8.782525] usbcore: registered new interface driver usbhid
[ 8.788453] usbhid: USB HID core driver
[ 8.795652] TCP: cubic registered
[ 8.799202] Initializing XFRM netlink socket
[ 8.803751] NET: Registered protocol family 17
[ 8.808567] NET: Registered protocol family 15
[ 8.813470] Key type dns_resolver registered
[ 8.818134] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 8.826285] ThumbEE CPU extension supported.
[ 8.830828] Registering SWP/SWPB emulation handler
[ 8.836925] registered taskstats version 1
[ 8.860585] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 8.871126] mmc0: new high speed SDHC card at address 1234
[ 8.877717] mmcblk0: mmc0:1234 SA04G 3.63 GiB
[ 8.885217] mmcblk0: p1 p2 p3
[ 8.892125] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 8.898538] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 8.912883] libphy: 4a101000.mdio: probed
[ 8.917178] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 8.927048] Detected MACID = 78:a5:04:cf:9c:eb
[ 8.931737] cpsw 4a100000.ethernet: NAPI disabled
[ 8.938419] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 8.954719] ALSA device list:
[ 8.957852] No soundcards found.
[ 8.962051] Freeing init memory: 264K
[ 8.965971] Failed to execute /init
[ 9.195712] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[ 9.242803] compile Apr 14 2015--09:34:39
[ 9.247112] CM_PER_SPI1_CLKCTRL 0x10002
[ 9.251145] spi_vaddr 0xfa1a0000
[ 9.254525] version 0x40300a0b
[ 9.257720] OMAP2_MCSPI_SYSSTATUS 0x1
[ 9.261552] OMAP2_MCSPI_MODULCTRL 0x1
[ 9.265379] OMAP2_MCSPI_CHCONF0 0x180103c5
[ 9.269719] Initial OMAP2_MCSPI_IRQSTATUS{0x0}OMAP2_MCSPI_IRQENABLE{0x0}
[ 9.276858] hash ok
[ 9.279075] hashtest OK
[ 9.281882] bitmain-asic: success to register device
[ 9.291482] Detect hardware version = 1
[ 9.295614] fix hardware version
[ 9.299000] hardware_version = 0x1
[ 9.302777] pwm_percent{20}
[ 9.305924] bitmain_asic_open ok
[ 10.769040] pwm_percent{20}
[ 10.771990] timeout {0x1b57}
[ 10.775008] rev timeout {0x571b0080}
[ 10.778821] set_baud cmd_buf[0]{0x86}cmd_buf[1]{0x10}cmd_buf[2]{0x1a}cmd_buf[3]{0x17}
[ 10.787002] send BC data:
[ 10.787002] 0x0000: 0x03 0x00 0x00 0x00 0x86 0x10 0x1a 0x17
[ 10.796366] send BC data:
[ 10.796366] 0x0000: 0x03 0x01 0x00 0x00 0x86 0x10 0x1a 0x17
[ 10.806137] send BC data:
[ 10.806137] 0x0000: 0x03 0x02 0x00 0x00 0x86 0x10 0x1a 0x17
[ 10.815902] send BC data:
[ 10.815902] 0x0000: 0x03 0x03 0x00 0x00 0x86 0x10 0x1a 0x17
[ 10.935047] set_voltage cmd_buf[0]{0xaa}cmd_buf[1]{0xb7}cmd_buf[2]{0x25}cmd_buf[3]{0xcd}
[ 10.943511] send BC data:
[ 10.943511] 0x0000: 0x03 0x00 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[ 10.954573] send BC data:
[ 10.954573] 0x0000: 0x03 0x01 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[ 10.964339] send BC data:
[ 10.964339] 0x0000: 0x03 0x02 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[ 10.976069] send BC data:
[ 10.976069] 0x0000: 0x03 0x03 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[ 11.095203] bitmain_asic_close
[ 11.918655] net eth0: initializing cpsw version 1.12 (0)
[ 11.926512] net eth0: phy found : id is : 0x7c0f1
[ 11.931498] libphy: PHY 4a101000.mdio:01 not found
[ 11.936526] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 15.001935] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
[ 32.212774] bitmain-asic: success to unregister device
[ 33.234606] compile Apr 14 2015--09:34:39
[ 33.238896] CM_PER_SPI1_CLKCTRL 0x2
[ 33.242571] spi_vaddr 0xfa1a0000
[ 33.245948] version 0x40300a0b
[ 33.249144] OMAP2_MCSPI_SYSSTATUS 0x1
[ 33.252972] OMAP2_MCSPI_MODULCTRL 0x1
[ 33.256800] OMAP2_MCSPI_CHCONF0 0x180103c5
[ 33.261136] Initial OMAP2_MCSPI_IRQSTATUS{0x0}OMAP2_MCSPI_IRQENABLE{0x0}
[ 33.268264] hash ok
[ 33.270486] hashtest OK
[ 33.273272] bitmain-asic: success to register device
[ 33.402614] Detect hardware version = 1
[ 33.406696] fix hardware version
[ 33.410079] hardware_version = 0x1
[ 33.417855] pwm_percent{20}
[ 33.425418] bitmain_asic_open ok
[ 33.445790] Detect device
[ 33.450990] reset hash asic
[ 33.453959] clear FPGA nonce buffer
[ 33.605646] bitmain_lcd: module license 'unspecified' taints kernel.
[ 33.612373] Disabling lock debugging due to kernel taint
[ 33.636370] kthread ok
[ 33.638970] ************ S4 nand board ***************
[ 33.644363] fix hardware version{1}
[ 34.458564] reset hash asic
[ 34.461510] clear FPGA nonce buffer
[ 35.563964] clear FPGA nonce buffer
[ 35.567775] get chain0 reg0x0
[ 35.570889] send BC data:
[ 35.570889] 0x0000: 0x03 0x00 0x00 0x1a 0x84 0x00 0x00 0x11
[ 35.677303] asic cmd return 00908213
[ 35.681043] asic cmd return 04908213
[ 35.684786] asic cmd return 08908213
[ 35.688530] asic cmd return 0c908213
[ 35.692277] asic cmd return 10908213
[ 35.696088] asic cmd return 14908213
[ 35.699838] asic cmd return 18908213
[ 35.703584] asic cmd return 1c908213
[ 35.707329] asic cmd return 20908213
[ 35.711072] asic cmd return 24908213
[ 35.714883] asic cmd return 28908213
[ 35.718629] asic cmd return 2c908213
[ 35.722376] asic cmd return 30908213
[ 35.726116] asic cmd return 34908213
[ 35.729863] asic cmd return 38908213
[ 35.733681] asic cmd return 3c908213
[ 35.737434] asic cmd return 40908213
[ 35.741184] asic cmd return 44908213
[ 35.744927] asic cmd return 48908213
[ 35.748665] asic cmd return 4c908213
[ 35.752479] asic cmd return 50908213
[ 35.756221] asic cmd return 54908213
[ 35.760070] asic cmd return 58908213
[ 35.763820] asic cmd return 5c908213
[ 35.767570] asic cmd return 64908213
[ 35.771780] asic cmd return 68908213
[ 35.775550] asic cmd return 6c908213
[ 35.779290] asic cmd return 70908213
[ 35.783035] asic cmd return 74908213
[ 35.786772] asic cmd return 78908213
[ 35.790600] asic cmd return 7c908213
[ 35.794357] asic cmd return 80908213
[ 35.798107] asic cmd return 84908213
[ 35.801851] asic cmd return 88908213
[ 35.805589] asic cmd return 8c908213
[ 35.809409] asic cmd return 90908213
[ 35.813165] asic cmd return 94908213
[ 35.816908] asic cmd return 98908213
[ 35.820651] asic cmd return 9c908213
[ 35.824464] chain0 total asic:39
[ 35.827850] pos0--addr:00
[ 35.830599] pos1--addr:04
[ 35.833342] pos2--addr:08
[ 35.836105] pos3--addr:0c
[ 35.838853] pos4--addr:10
[ 35.841602] pos5--addr:14
[ 35.844350] pos6--addr:18
[ 35.847089] pos7--addr:1c
[ 35.849832] pos8--addr:20
[ 35.852573] pos9--addr:24
[ 35.855321] pos10--addr:28
[ 35.858154] pos11--addr:2c
[ 35.860989] pos12--addr:30
[ 35.863823] pos13--addr:34
[ 35.866667] pos14--addr:38
[ 35.869501] pos15--addr:3c
[ 35.872333] pos16--addr:40
[ 35.875171] pos17--addr:44
[ 35.878004] pos18--addr:48
[ 35.880839] pos19--addr:4c
[ 35.883674] pos20--addr:50
[ 35.886509] pos21--addr:54
[ 35.889342] pos22--addr:58
[ 35.892182] pos23--addr:5c
[ 35.895017] pos24--addr:64
[ 35.897847] pos25--addr:68
[ 35.900684] pos26--addr:6c
[ 35.903522] pos27--addr:70
[ 35.906364] pos28--addr:74
[ 35.909201] pos29--addr:78
[ 35.912031] pos30--addr:7c
[ 35.914868] pos31--addr:80
[ 35.917705] pos32--addr:84
[ 35.920540] pos33--addr:88
[ 35.923370] pos34--addr:8c
[ 35.926203] pos35--addr:90
[ 35.929035] pos36--addr:94
[ 35.931875] pos37--addr:98
[ 35.934705] pos38--addr:9c
[ 35.937548] chain0_asic_exist{0xfeffffff}
[ 35.941752] clear FPGA nonce buffer
[ 35.946468] get chain1 reg0x0
[ 35.949601] send BC data:
[ 35.949601] 0x0000: 0x03 0x01 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.056218] asic cmd return 00908213
[ 36.059989] asic cmd return 04908213
[ 36.063742] asic cmd return 08908213
[ 36.067480] asic cmd return 0c908213
[ 36.071225] asic cmd return 10908213
[ 36.075142] asic cmd return 14908213
[ 36.078896] asic cmd return 18908213
[ 36.082636] asic cmd return 1c908213
[ 36.086376] asic cmd return 20908213
[ 36.090125] asic cmd return 24908213
[ 36.093957] asic cmd return 28908213
[ 36.097707] asic cmd return 2c908213
[ 36.101453] asic cmd return 30908213
[ 36.105195] asic cmd return 34908213
[ 36.108947] asic cmd return 38908213
[ 36.112746] asic cmd return 3c908213
[ 36.116491] asic cmd return 40908213
[ 36.120232] asic cmd return 44908213
[ 36.123970] asic cmd return 48908213
[ 36.127723] asic cmd return 4c908213
[ 36.131524] asic cmd return 50908213
[ 36.135263] asic cmd return 54908213
[ 36.138999] asic cmd return 58908213
[ 36.142746] asic cmd return 5c908213
[ 36.146489] asic cmd return 60908213
[ 36.150300] asic cmd return 64908213
[ 36.154039] asic cmd return 68908213
[ 36.157778] asic cmd return 6c908213
[ 36.161519] asic cmd return 70908213
[ 36.165264] asic cmd return 74908213
[ 36.169146] asic cmd return 78908213
[ 36.172894] asic cmd return 7c908213
[ 36.176637] asic cmd return 80908213
[ 36.180382] asic cmd return 84908213
[ 36.184120] asic cmd return 88908213
[ 36.187940] asic cmd return 8c908213
[ 36.191688] asic cmd return 90908213
[ 36.195429] asic cmd return 94908213
[ 36.199181] asic cmd return 98908213
[ 36.202924] asic cmd return 9c908213
[ 36.206737] chain1 total asic:40
[ 36.210122] pos0--addr:00
[ 36.212868] pos1--addr:04
[ 36.215611] pos2--addr:08
[ 36.218354] pos3--addr:0c
[ 36.221103] pos4--addr:10
[ 36.223848] pos5--addr:14
[ 36.226601] pos6--addr:18
[ 36.229345] pos7--addr:1c
[ 36.232094] pos8--addr:20
[ 36.234843] pos9--addr:24
[ 36.237586] pos10--addr:28
[ 36.240425] pos11--addr:2c
[ 36.243261] pos12--addr:30
[ 36.246100] pos13--addr:34
[ 36.248946] pos14--addr:38
[ 36.251787] pos15--addr:3c
[ 36.254620] pos16--addr:40
[ 36.257460] pos17--addr:44
[ 36.260296] pos18--addr:48
[ 36.263135] pos19--addr:4c
[ 36.265973] pos20--addr:50
[ 36.268809] pos21--addr:54
[ 36.271642] pos22--addr:58
[ 36.274477] pos23--addr:5c
[ 36.277314] pos24--addr:60
[ 36.280150] pos25--addr:64
[ 36.282989] pos26--addr:68
[ 36.285832] pos27--addr:6c
[ 36.288668] pos28--addr:70
[ 36.291512] pos29--addr:74
[ 36.294350] pos30--addr:78
[ 36.297186] pos31--addr:7c
[ 36.300025] pos32--addr:80
[ 36.302864] pos33--addr:84
[ 36.305707] pos34--addr:88
[ 36.308548] pos35--addr:8c
[ 36.311383] pos36--addr:90
[ 36.314221] pos37--addr:94
[ 36.317059] pos38--addr:98
[ 36.319893] pos39--addr:9c
[ 36.322730] chain1_asic_exist{0xffffffff}
[ 36.326929] clear FPGA nonce buffer
[ 36.330720] get chain2 reg0x0
[ 36.333833] send BC data:
[ 36.333833] 0x0000: 0x03 0x02 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.439025] asic cmd return 00908213
[ 36.442780] asic cmd return 04908213
[ 36.446523] asic cmd return 08908213
[ 36.450274] asic cmd return 0c908213
[ 36.454024] asic cmd return 10908213
[ 36.457827] asic cmd return 14908213
[ 36.461577] asic cmd return 18908213
[ 36.465328] asic cmd return 1c908213
[ 36.469073] asic cmd return 20908213
[ 36.472812] asic cmd return 24908213
[ 36.476612] asic cmd return 28908213
[ 36.480354] asic cmd return 2c908213
[ 36.484104] asic cmd return 30908213
[ 36.487859] asic cmd return 34908213
[ 36.491599] asic cmd return 38908213
[ 36.495408] asic cmd return 3c908213
[ 36.499154] asic cmd return 40908213
[ 36.502903] asic cmd return 44908213
[ 36.506649] asic cmd return 48908213
[ 36.510393] asic cmd return 4c908213
[ 36.514197] asic cmd return 50908213
[ 36.517942] asic cmd return 54908213
[ 36.521689] asic cmd return 58908213
[ 36.525437] asic cmd return 5c908213
[ 36.529177] asic cmd return 60908213
[ 36.532977] asic cmd return 64908213
[ 36.536726] asic cmd return 68908213
[ 36.540471] asic cmd return 6c908213
[ 36.544219] asic cmd return 70908213
[ 36.547961] asic cmd return 74908213
[ 36.551780] asic cmd return 78908213
[ 36.555532] asic cmd return 7c908213
[ 36.559276] asic cmd return 80908213
[ 36.563016] asic cmd return 84908213
[ 36.566756] asic cmd return 88908213
[ 36.570564] asic cmd return 8c908213
[ 36.574310] asic cmd return 90908213
[ 36.578049] asic cmd return 94908213
[ 36.581794] asic cmd return 98908213
[ 36.585542] asic cmd return 9c908213
[ 36.589343] chain2 total asic:40
[ 36.592719] pos0--addr:00
[ 36.595462] pos1--addr:04
[ 36.598209] pos2--addr:08
[ 36.600960] pos3--addr:0c
[ 36.603704] pos4--addr:10
[ 36.606446] pos5--addr:14
[ 36.609197] pos6--addr:18
[ 36.611939] pos7--addr:1c
[ 36.614685] pos8--addr:20
[ 36.617431] pos9--addr:24
[ 36.620173] pos10--addr:28
[ 36.623007] pos11--addr:2c
[ 36.625837] pos12--addr:30
[ 36.628685] pos13--addr:34
[ 36.631522] pos14--addr:38
[ 36.634368] pos15--addr:3c
[ 36.637201] pos16--addr:40
[ 36.640035] pos17--addr:44
[ 36.642872] pos18--addr:48
[ 36.645707] pos19--addr:4c
[ 36.648544] pos20--addr:50
[ 36.651385] pos21--addr:54
[ 36.654214] pos22--addr:58
[ 36.657047] pos23--addr:5c
[ 36.659881] pos24--addr:60
[ 36.662718] pos25--addr:64
[ 36.665549] pos26--addr:68
[ 36.668383] pos27--addr:6c
[ 36.671218] pos28--addr:70
[ 36.674056] pos29--addr:74
[ 36.676893] pos30--addr:78
[ 36.679819] pos31--addr:7c
[ 36.682666] pos32--addr:80
[ 36.685511] pos33--addr:84
[ 36.688350] pos34--addr:88
[ 36.691178] pos35--addr:8c
[ 36.694015] pos36--addr:90
[ 36.696845] pos37--addr:94
[ 36.699688] pos38--addr:98
[ 36.702526] pos39--addr:9c
[ 36.705367] chain2_asic_exist{0xffffffff}
[ 36.709564] clear FPGA nonce buffer
[ 36.713727] get chain3 reg0x0
[ 36.716864] send BC data:
[ 36.716864] 0x0000: 0x03 0x03 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.823791] asic cmd return 00908213
[ 36.827547] asic cmd return 04908213
[ 36.831288] asic cmd return 08908213
[ 36.835034] asic cmd return 0c908213
[ 36.838775] asic cmd return 10908213
[ 36.842582] asic cmd return 14908213
[ 36.846336] asic cmd return 18908213
[ 36.850077] asic cmd return 1c908213
[ 36.853820] asic cmd return 20908213
[ 36.857559] asic cmd return 24908213
[ 36.861396] asic cmd return 28908213
[ 36.865150] asic cmd return 2c908213
[ 36.868894] asic cmd return 30908213
[ 36.872638] asic cmd return 34908213
[ 36.876382] asic cmd return 38908213
[ 36.880183] asic cmd return 3c908213
[ 36.883931] asic cmd return 40908213
[ 36.887672] asic cmd return 44908213
[ 36.891412] asic cmd return 48908213
[ 36.895156] asic cmd return 4c908213
[ 36.898960] asic cmd return 50908213
[ 36.902707] asic cmd return 54908213
[ 36.906453] asic cmd return 58908213
[ 36.910198] asic cmd return 5c908213
[ 36.913949] asic cmd return 60908213
[ 36.917759] asic cmd return 64908213
[ 36.921504] asic cmd return 68908213
[ 36.925259] asic cmd return 6c908213
[ 36.929006] asic cmd return 70908213
[ 36.932754] asic cmd return 74908213
[ 36.936568] asic cmd return 78908213
[ 36.940311] asic cmd return 7c908213
[ 36.944056] asic cmd return 80908213
[ 36.947796] asic cmd return 84908213
[ 36.951535] asic cmd return 88908213
[ 36.955348] asic cmd return 8c908213
[ 36.959096] asic cmd return 90908213
[ 36.962842] asic cmd return 94908213
[ 36.966585] asic cmd return 98908213
[ 36.970325] asic cmd return 9c908213
|
|
|
|
|
Greetings to all the brothers of the forum! I have a small altercation with one of my antminer s4, this came working normal as always, however in an internet crash, I stop booting, the strange thing is that when I reset the factory it starts at the moment, however when I put it in the configuration of the data of my worker and the pool, it does not start, I have restarted it, reset it, reinstalled the firmware, I have done the boot image again on the microsd and even so, when I put my configuration it still does not start, it only starts when it has the default configuration, what can this be due to? Thank you in advance for the help you can give me.
|
|
|
|
|
Saludos a todos los hermanos del foro! tengo un pequeño altercado con uno de mis antminer s4, este venia trabajando normal como siempre, sin embargo en una caída de internet, dejo de arrancar, lo extraño es que cuando lo reseteo de fabrica el arranca al momento, sin embargo cuando le coloco en la configuración los datos de mi worker y la pool, ya este no arranca, lo he reiniciado, reseteado, reinstalado el firmware, le he vuelto a hacer la imagen de arranque en la microsd y aun asi, cuando coloco mi configuración sigue sin arrancar, solo arranca cuando tiene la configuración por defecto, a que puede deberse esto? agradecido de antemano por la ayuda que puedan aportarme.
|
|
|
|
|
Últimamente me he mantenido minando bitcoin cash, sin embargo me he dado cuenta que los pagos están tardando bastante en procesarse, de antpool al monedero, alguien sabe a que se debe esto?
|
|
|
|
Tendrías que intentar a ver si resulta colocándole la pasta térmica, te recomiendo la marca "ARCTIC".
Muchas gracias, luego de cambiar la pasta termica se soluciono, sin embargo me di cuenta que dejo detectar un chip, no me muestra la "x" si no un "-" y el conteo de los asic de dicha tarjeta bajo a 39 (tiene 40) al cabo de un rato el "-" desaparece, de resto todo bien. |
|
|
|
Thermal paste conducts heat energy across the microscopic (air gap)surfaces of the processor and the heatsink. It is not water-based and should never dry out (but will eventually) when it does it loses its effectiveness. Don't use cheap paste that dries out relatively quickly.
Does that mean that the problem can be caused by the already dry pasta? a while ago remove the dissipators I cleaned the dry thermal paste they had and then connect the miner after restarting a couple of times started working at its normal power 2000ghs, however, I know that if I restart it is possible to return to the previous state Could it be the thermal paste that is generating this problem? Thanks for your comment! You always want thermal paste to be still slightly gooey or at least not completely hard and it must also be free of bubbles. A new bead of thermal paste should always be applied after removing a heatsink to safeguard against the inclusion of air bubbles. That's just my two cents on thermal paste and heatsinks I don't know if it will solve your problem. What is the best way to remove the thermal paste without affecting the chips? I noticed that the texture of the thermal paste that the chips already look like plasticine, thank you in advance. |
|
|
|
Thermal paste conducts heat energy across the microscopic (air gap)surfaces of the processor and the heatsink. It is not water-based and should never dry out (but will eventually) when it does it loses its effectiveness. Don't use cheap paste that dries out relatively quickly.
Does that mean that the problem can be caused by the already dry pasta? a while ago remove the dissipators I cleaned the dry thermal paste they had and then connect the miner after restarting a couple of times started working at its normal power 2000ghs, however, I know that if I restart it is possible to return to the previous state Could it be the thermal paste that is generating this problem? Thanks for your comment! |
|
|
|
|
Can a dry thermal paste generate hardware problems such as not having reflected the temperatures of the hashboards in the mining interface or not recognizing the cards? I kept my miner off for almost 1 month for lack of a fancooler which stopped working, after I bought the spare I started the problem that I recognized the temperature of some cards if and others, sometimes it shows almost all the "x" in your cards, however you know that the asics are not damaged since their count is kept at "40" for each card (it is an antminer s4) there are also occasions that shows all the chips in "o" but does not raise power, sometimes the restart and reaches 500 ghs, a while ago remove the dissipators and I realized that the thermal paste is very dry, I do not know if the previous owners changed it sometime or if it is the original pasta (if so and taking into account that the antminer s4 was released to the public in 2014 and it would be enough time with that thermal paste not?) After having put the heatsinks again (without changing the thermal paste since I still do not buy it) I turned on the antminer and it reached 2100 ghs and there it remained, as it had reset previously, I had lost its configuration with the pool so I put it back and when it rebooted it returned to the previous state, recognizing the temperature of some cards and not others, some people told me that this may be due to the thermal paste and that I have to change it, now brothers of the forum, is it possible that this problem is generating the thermal paste?
What would be the correct way to remove the old thermal paste from the chips without these being affected?
|
|
|
|
Hola, fijate si has colocado en la posición correcta los fans en el aspecto de la entrada y salida de aire.
Hace un rato le quite los disipadores a las tarjetas y me di cuenta que la pasta termica esta muy seca, no se si los dueños anteriores la cambiaron alguna vez o si es la pasta original (que teniendo en cuenta que el s4 salio en 2014 es bastante tiempo) luego cuando le coloque los disipadores de nuevo y la conecte llego a 2100 ghs y ahi se mantuvo, la reinicie y volvio al mismo estado anterior, me han dicho que es posible que esto se deba a la pasta termica y que debo cambiarla, es posible que sea esta la razón? (los fan cooler estan puestos bien) |
|
|
|
Greetings brothers, I hope you are well, I have a small problem with my Antminer, recently I had damaged one of the fancooler and decided to leave the machine off until I got the spare, I spent several days off and yesterday I finally got the fancooler and I put it on, I started it and began to mine everything well, however I realized that I did not detect the temperatures of 2 cards (it is an S4) and I restarted it, suddenly I stop detecting the temperatures, now they appear "x" in almost all the cards, but there are also times that the restart and all the chips appear in "o" but does not upload the hash them as shown below, what could be the possible solution to this problem? I already tried resetandola, creating the boot image again and starts and starts normally, I think it has nothing to do with the chips are damaged because in the count of the asic is still showing 40 in all, has any had this problem? https://image.prntscr.com/image/T6UFS2RdS5mSUoKwTH10sw.pnghttps://image.prntscr.com/image/4bj0UetsRAaFeaGpS575nA.pngIs it possible that the new fan cooler has ruined it? buy the most expensive one recommended by the bitmain support list for the s4 ... I hope this has a solution. The last time I checked the kernel, it showed me the following https://image.prntscr.com/image/0xYt7FevS9GFz2xRjlf55w.pngI usually restart it and sometimes recognizes some cards if and others do not (this has 4) there have even been times when the restart and begins to mine, the highest I get to see it was in 1500ghs, the last was 300ghs and since then it has not recognized the cards. |
|
|
|
Greetings brothers, I hope you are well, I have a small problem with my Antminer, recently I had damaged one of the fancooler and decided to leave the machine off until I got the spare, I spent several days off and yesterday I finally got the fancooler and I put it on, I started it and began to mine everything well, however I realized that I did not detect the temperatures of 2 cards (it is an S4) and I restarted it, suddenly I stop detecting the temperatures, now they appear "x" in almost all the cards, but there are also times that the restart and all the chips appear in "o" but does not upload the hash them as shown below, what could be the possible solution to this problem? I already tried resetandola, creating the boot image again and starts and starts normally, I think it has nothing to do with the chips are damaged because in the count of the asic is still showing 40 in all, has any had this problem? https://image.prntscr.com/image/T6UFS2RdS5mSUoKwTH10sw.pnghttps://image.prntscr.com/image/4bj0UetsRAaFeaGpS575nA.pngIs it possible that the new fan cooler has ruined it? buy the most expensive one recommended by the bitmain support list for the s4 ... I hope this has a solution. |
|
|
|
Saludos hermanos, espero se encuentren bien, tengo un pequeño problema con mi Antminer, hace poco se me habia dañado uno de los fancooler y decidi dejar la maquina apagada hasta que consiguiera el repuesto, paso varios dias apagada y ayer por fin me llego el fancooler y se lo coloque, la prendi y comenzo a minar todo bien, sin embargo me di cuenta que no me detectaba las temperaturas de 2 tarjetas (es un S4) y lo reinicie, de pronto dejo de detectar las temperaturas, ahora aparecen "x" en casi todas las tarjetas, pero tambien hay momentos que la reinicio y aparecen todos los chips bien en "o" pero no levanta potencia les anexo como se ve https://image.prntscr.com/image/T6UFS2RdS5mSUoKwTH10sw.png[/img] https://image.prntscr.com/image/4bj0UetsRAaFeaGpS575nA.pngA veces reconoce la temperatura de unas tarjetas y de otras no y si la reinicio va asi, reconociendo 2 si y 2 no. |
|
|
|
Saludos hermanos, espero se encuentren bien, tengo un pequeño problema con mi Antminer, hace poco se me habia dañado uno de los fancooler y decidi dejar la maquina apagada hasta que consiguiera el repuesto, paso varios dias apagada y ayer por fin me llego el fancooler y se lo coloque, la prendi y comenzo a minar todo bien, sin embargo me di cuenta que no me detectaba las temperaturas de 2 tarjetas (es un S4) y lo reinicie, de pronto dejo de detectar las temperaturas, ahora aparecen "x" en casi todas las tarjetas, pero tambien hay momentos que la reinicio y aparecen todos los chips bien en "o" pero no levanta potencia les anexo como se ve https://image.prntscr.com/image/T6UFS2RdS5mSUoKwTH10sw.png[/img] https://image.prntscr.com/image/4bj0UetsRAaFeaGpS575nA.png |
|
|
|
|
Greetings brothers, I have a little doubt, for example is it possible to adapt a different power source to an Antminer S4? This question arises because I read that they are power supply modified, that means that you could adapt another source of power of 1400w that is the one that uses this model that I give as an example?
|
|
|
|
Very grateful for your answer brother !!! How unfortunate that he bought the one that was not, I should ask before doing it ... |
|
|
|
Greetings brothers, again I here jajajajaja, recently one of the fans of my Antminer S4 reached its end, gave everything he could give, on the support page show several models that can replace said fan, acquired this model  Delta TFC1212DE
Now the problem I have is that the miner does not recognize me as a fan, that is, he shows his speed at 0, is there any way he can recognize it? Thanks in advance! PS: https://support.myrig.com/hc/en-us/articles/204199879-Antminer-S4-fan-specification-and-possible-replacement-fans (Bitmain support page where this Fan model leads the way list) |
|
|
|
Saludos hermanos, otra vez yo por acá jajajajaja, hace poco uno de los fan de mi Antminer S4 llego a su final, dio todo lo que podia dar, en la pagina de soporte muestran varios modelos que pueden sustituir dicho fan, adquiri este modelo Delta TFC1212DE
Ahora el problema que tengo es que el minero no me reconoce el fan, es decir, muestra su velocidad en 0, hay algun modo de que lo reconozca? Gracias de antemano! PD: https://support.myrig.com/hc/en-us/articles/204199879-Antminer-S4-fan-specification-and-possible-replacement-fans (pagina del soporte de Bitmain donde este modelo de Fan encabeza la lista) |
|
|
|
|
