guys i try to run 13 gtx 1060 3gb on asrock h110 and Ethos.
Everytime i get more then 8gpu connected my rig crasches..... and ist not the riser, it cant be that all 5 other risers are broken (i checked one by one the last 5 risers) one of them has started but crashed after 10 minutes.
Now ist like the gpu nr 9 which was mining the 10 minutes now won's start
And it was on mem 4000 and pwr 90 = 17,5 so i didnt overclock too much..... (THE first 8GPU was able to work on mem 4400 4 hours with no crashes )..
Problems started when i connected gpu 9 , 10 11, 12 or 13 ........
i have 2x molex + sata power connected
I also made an Isolation betwen risers so they dont touch each other...
what the füc* is wrong with These Mainboards .... ??
please advice !!
Hi guys we need your help here. I have the same problem with 1 H110 MB. 8 cards P106 works fine, when I connect 9. card rig restarting it self. Same thing is when I connect 9. card on direct on MB. Smos system with no overclocking. Riser are fine, because I check it.
Another problem is with 3 different H110 MB I have 13 1050Ti cards and rig works fine for a 5-22 hours and then shut down. I mean rig is working but it is not mining, on smos is red line.
But one configuration with H110 MB works without any problem.
My configuration for is:
CPU: celeron 3930
4 GB RAM
MB: H110
Cards: 13 1050TI
PSU: HX1000 Corsair
Another one:
CPU: Celeron 3930
4 GB RAM
MB: H110
Cards 13 P106
PSU: HX 1200
Thank you
Show Posts
