Show Posts
|
Pages: [1] 2 3 »
|
Thanks! Looks like I missed this one.
|
|
|
According to the AirTime Explorer, I made 24 TUBEs in the last few days of watching videos. But when I go the the wallet page my balance is null. I imported my keys in the CLI wallet and got the same result. Anybody else faced this issue?
|
|
|
Anybody here mining BitTube with Rx550's and XMR-STAK?
What is your settings for the best hashrate?
|
|
|
Don't know about it's price on Stocks.Exchange but on TradeOgre is was pumped to 2 sat last weekend.
So if you're patient enough you can buy some at 1 sat and wait until it's pumped again to sell at 2 sat.
But I won't waste my electricity to mine more of that coin.
![Huh](https://bitcointalk.org/Smileys/default/huh.gif) This isn't even listed on TradeOgre... You're right lol Thought I was in another's coin topic! Indeed, this coin looks dead and not worth mining nor buying.
|
|
|
Don't know about it's price on Stocks.Exchange but on TradeOgre is was pumped to 2 sat last weekend.
So if you're patient enough you can buy some at 1 sat and wait until it's pumped again to sell at 2 sat.
But I won't waste my electricity to mine more of that coin.
|
|
|
is new algo ultraheavy ? with my rx560 on algo heavy sumo/heaven still get 500hs this coin more less not more than 300hs and only work with srbminer with your miner always crash my rig
Same here. On my Rx 550 rig, it mines for 20-60 minutes then hang and I have to restart the miner. Any fix coming for this issue?
|
|
|
And also, what would it take, for Turtle to be listed on CMC?
It takes a minimum daily trading volume of $100000.
|
|
|
There seems to be a problem with some transactions on the blockchain. The following transaction:
3c29b4f814c782e5be30f73b380b8f45bcd1b1d7523ee8291ad4c239a8deb651
Have 0 confirmations after over 9 hours. There is transactions made after this one that have hundreds of confirmations. Browsing the block explorer I saw a lot of old transactions that also have 0 confirmation.
What happen with these trx and will they be processed eventually?
The trx was finally processed. Just can't confirm for the other ones because currently the block explorer seems to have a little bug as it only shows 51 trx when I clicked for the full list. Anyway, my wallet now show the correct balance which doesn't happened in a few days.
|
|
|
There seems to be a problem with some transactions on the blockchain. The following transaction:
3c29b4f814c782e5be30f73b380b8f45bcd1b1d7523ee8291ad4c239a8deb651
Have 0 confirmations after over 9 hours. There is transactions made after this one that have hundreds of confirmations. Browsing the block explorer I saw a lot of old transactions that also have 0 confirmation.
What happen with these trx and will they be processed eventually?
|
|
|
where the heck are blockchain files downlaoded? My C: drive is full!!! I need to change the location.
I run the GUI walllet.
Hi, Blockchain is stored here : C:\ProgramData\stellite You can change the data directory with the CLI Wallet. stellited --data-dir C:\ProgramData\stellite
CLI Wallet shows: unknown command: stellited --data-dir D:\ I don't use the daemon on Windows but in linux we have to put an "=" after data-dir. Try that: stellited --data-dir=D:\ (a space after stellited and no space in the rest of line) And make sure in your command prompt you are located in the directory where stellited is or type the command with the full path.
|
|
|
I think there may have been a bit of a glitch at trtl.mine2gether.com. I re-started mining after the fork, received a payout then nothing for ages (should be about 500 every payment), then suddenly a 2500 drop of TRTL turned up in my wallet. The TurtleCoin network faced at least three attacks in the last few days and the result on https://trtl.mine2gether.com/ was that almost all blocks were orphaned. Then after some time after the system came back to normal and big payments were made.
|
|
|
when edollar come to coinmarketcap
Coinmarketcap now requires $100000 daily exchange volume to list a coin.
|
|
|
I just upgraded my daemon and wallet. In the new version (linux cli) even if we specify the wallet path and file (--wallet-file=<PATH>) we still get this menu: Welcome, please choose an option below:
[G] - Generate a new wallet address [O] - Open a wallet already on your system [S] - Regenerate your wallet using a seed phrase of words [I] - Import your wallet using a View Key and Spend Key [V] - Import a view only wallet (Unable to send transactions)
Don't know if I miss something but otherwise this need to be fixed.
|
|
|
Hey guys! i mined with my 2 Gpu PC IPBC (about 1,1k hash) with no problems but when i want to mine with my 6 gpu rig i only get about 550 h/s... i cannot find the problem, would be great if somebody could help me with this problem! thanks in advance!
Would be better if you tell us your rig specifications, which mining software you use and it's config! We can't really help without these. Win 10 home - 6 gtx 1070 - 16 GB Ram stupid question i think but where i can find their config? We need to know the software you use to mine (xmr-stak, ccminer, minergate, xmrig, etc) and it's config file. I've checked the cryptonight's hashrate for a 1070 and it looks like you have only one GPU mining. i'm using xmr-stak tried it once with ccminer but didn't worked Nvidia.config:"gpu_threads_conf" : [ // gpu: GeForce GTX 1070 architecture: 61 // memory: 6789/8192 MiB // smx: 15 { "index" : 0, "threads" : 28, "blocks" : 45, "bfactor" : 6, "bsleep" : 25, "affine_to_cpu" : false, "sync_mode" : 3, }, At first glance your settings looks good to me. Can you post a screenshot of xmr-stak's report (press "h" in mining window) maybe we could find a clue in it! Thanks for helping! Sorry for the late answer, wasn't able to get to the miner earlier. https://picload.org/view/daplaoll/img_0582.jpg.htmlhttps://picload.org/view/daplaoli/img_0583.jpg.htmlThe reason you're only getting 550 H/S is that it's only your CPU mining. Your GPUs are doing absolutely nothing right now. First thing I'd check is the Windows Device Manager to see if your GPUs are recognized by the system. If not it's a driver issue. You could also install MSI Afterburner, you could see if it detect them. (But don't mess too much with this software, you coud burn your GPUs.) If all is OK with the driver, I'd re-check your XMR-STAK config (nvidia.txt) to be sure you didn't miss a character somewhere. An easy way would be to delete all config files and start XMR-STAK again and it will prompt you to create the config files. Then you can tweak them as you want. Should you have to reinstall the driver, follow the instructions on https://obsproject.com/forum/resources/performing-a-clean-gpu-driver-installation.65/ before reinstalling. doesn't help :/ GPUs work fine mining other stuff like eth could you recommend another miner for ipbc? ccminer from IPBC HP doesn't work always closes Sorry! I'm out of ideas right now without being in front of the computer ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
Hey guys! i mined with my 2 Gpu PC IPBC (about 1,1k hash) with no problems but when i want to mine with my 6 gpu rig i only get about 550 h/s... i cannot find the problem, would be great if somebody could help me with this problem! thanks in advance!
Would be better if you tell us your rig specifications, which mining software you use and it's config! We can't really help without these. Win 10 home - 6 gtx 1070 - 16 GB Ram stupid question i think but where i can find their config? We need to know the software you use to mine (xmr-stak, ccminer, minergate, xmrig, etc) and it's config file. I've checked the cryptonight's hashrate for a 1070 and it looks like you have only one GPU mining. i'm using xmr-stak tried it once with ccminer but didn't worked Nvidia.config:"gpu_threads_conf" : [ // gpu: GeForce GTX 1070 architecture: 61 // memory: 6789/8192 MiB // smx: 15 { "index" : 0, "threads" : 28, "blocks" : 45, "bfactor" : 6, "bsleep" : 25, "affine_to_cpu" : false, "sync_mode" : 3, }, At first glance your settings looks good to me. Can you post a screenshot of xmr-stak's report (press "h" in mining window) maybe we could find a clue in it! Thanks for helping! Sorry for the late answer, wasn't able to get to the miner earlier. https://picload.org/view/daplaoll/img_0582.jpg.htmlhttps://picload.org/view/daplaoli/img_0583.jpg.htmlThe reason you're only getting 550 H/S is that it's only your CPU mining. Your GPUs are doing absolutely nothing right now. First thing I'd check is the Windows Device Manager to see if your GPUs are recognized by the system. If not it's a driver issue. You could also install MSI Afterburner, you could see if it detect them. (But don't mess too much with this software, you coud burn your GPUs.) If all is OK with the driver, I'd re-check your XMR-STAK config (nvidia.txt) to be sure you didn't miss a character somewhere. An easy way would be to delete all config files and start XMR-STAK again and it will prompt you to create the config files. Then you can tweak them as you want. Should you have to reinstall the driver, follow the instructions on https://obsproject.com/forum/resources/performing-a-clean-gpu-driver-installation.65/ before reinstalling.
|
|
|
Hey guys! i mined with my 2 Gpu PC IPBC (about 1,1k hash) with no problems but when i want to mine with my 6 gpu rig i only get about 550 h/s... i cannot find the problem, would be great if somebody could help me with this problem! thanks in advance!
Would be better if you tell us your rig specifications, which mining software you use and it's config! We can't really help without these. Win 10 home - 6 gtx 1070 - 16 GB Ram stupid question i think but where i can find their config? We need to know the software you use to mine (xmr-stak, ccminer, minergate, xmrig, etc) and it's config file. I've checked the cryptonight's hashrate for a 1070 and it looks like you have only one GPU mining. i'm using xmr-stak tried it once with ccminer but didn't worked Nvidia.config:"gpu_threads_conf" : [ // gpu: GeForce GTX 1070 architecture: 61 // memory: 6789/8192 MiB // smx: 15 { "index" : 0, "threads" : 28, "blocks" : 45, "bfactor" : 6, "bsleep" : 25, "affine_to_cpu" : false, "sync_mode" : 3, }, At first glance your settings looks good to me. Can you post a screenshot of xmr-stak's report (press "h" in mining window) maybe we could find a clue in it!
|
|
|
Hey guys! i mined with my 2 Gpu PC IPBC (about 1,1k hash) with no problems but when i want to mine with my 6 gpu rig i only get about 550 h/s... i cannot find the problem, would be great if somebody could help me with this problem! thanks in advance!
Would be better if you tell us your rig specifications, which mining software you use and it's config! We can't really help without these. Win 10 home - 6 gtx 1070 - 16 GB Ram stupid question i think but where i can find their config? We need to know the software you use to mine (xmr-stak, ccminer, minergate, xmrig, etc) and it's config file. I've checked the cryptonight's hashrate for a 1070 and it looks like you have only one GPU mining.
|
|
|
Hey guys! i mined with my 2 Gpu PC IPBC (about 1,1k hash) with no problems but when i want to mine with my 6 gpu rig i only get about 550 h/s... i cannot find the problem, would be great if somebody could help me with this problem! thanks in advance!
Would be better if you tell us your rig specifications, which mining software you use and it's config! We can't really help without these.
|
|
|
Quick question since I can't seem to find the info on my own.
Is IPBC trading possible on other platforms than just livecoin? Like forkdelta or etherdelta?
IPBC is a cryptonight coin. It can't be traded on these exchanges as they only trade Ethereum tokens.
|
|
|
Hey guys,
I've been in crypto for a year new, just starting to get into mining. I really believe in this project and TRUST the team so far. All the signs are good and i want to be a part of this. I understand this uses CPU mining? I'm clocking in at 15 H/s on an old macbook pro. Super weak. What should I consider to boost mining IPBC? Any new equipment? I don't have the budget for large rigs right now. Ideally if I did invest in something I'd want to be able to use it to mine other things in the future if need be. Thanks IPBC community.
If you don't have a big budget, I'd recommend AMD RX 550 2G. They're very cheap and you can get up to 470 H/S with a bios mod and just overclocking memory. My cards consume only 32W according to the driver for such a hashrate. I have two of them and 3 old I5 2500 cpu mining and I get 1.4 KH on average. A RX 550 4GB won't give you a higher hashrate on cryptonight. Don't even think about a RX 560 because for a higher price you'll get the same hashrate with more electricity consumed.
|
|
|
|