Show Posts
|
Pages: [1] 2 3 »
|
Phoenix 5.2e and ETC mining on big navi's is very stable. Thank you for the time and efforts. what's the hashrate situation?
|
|
|
Any ongoing updates for RX 6800/6800 XT? The miner works but only detect half of available CU (36 instead of 72)
|
|
|
I need BTC to go to US$ 75000 in 15 years. Will it go that high ?
|
|
|
RX 5600 XT goes 40 Mh/s ethash at 90w
|
|
|
tag for follow So the advise now is to keep accumulating?
|
|
|
There was never such slow adoption of new graphic card by mining devs, I think
Navi family is intentionally crippled by drivers, I suppose
|
|
|
If priced at 150 bucks, requiring 55 w for 30 Mh/s, with the current bitcoin price, the break even point would be 2 years. Much better than Navi 10's 3 years. Hoping that BTC/USD will go to 15000 again soon
|
|
|
What's the guess on eth performance on the new rx 5500? My guess is similar to the 5700/XT.
|
|
|
hi, there! I have a mix of different amd rx 470/570 and amd vega cards. the question is, would the miner work correctly if in one mining farm I have 2units amd vega and 4 units amd rx570 and one amdrx470? or it is better to make different farm which consist of one generation cards? I mean to separate two vegas from rx470/570?
they should work nicely together. the mining software will identify each and give loads accordingly. That is if you can make them all work in one mobo.
|
|
|
Yeah, man, we navi miners need some love too, man.
|
|
|
The last time financial crisis occur, oil and commodity prices shoot up to the moon buoyed by the feds bailout money. Now another financial crisis is coming, oil and commodity prices are kinda rising.. I believe bitcoin will be the next target for financial speculators to hedge the next financial crisis looming.
|
|
|
and now the price is back to 10200+ Moon Soon?
|
|
|
So, any updates on Navi front?
|
|
|
So basically we RX 5700XT users are stuck with ETHASH by Claymore now. Using PhoenixMiner, somehow one of my two RX 5700 will crap out after sometimes and the one that is still mining will still be showing fully loaded after mining is stopped.
I have three XFX 5700XT cards and mining with PhoenixMiner 4.6c No problems here. Hashing at ~52 MH/s each. -tt 58 -cvddc 750 -cclock 1300 -fanmin 0 -mclock 900 -amd -mode 1 -clKernel 1 -clNew 1 good for you. Maybe because I force copy PhoenixMiner 4.6c latest exe into nicehash miner plugin folder, it's not stable.
|
|
|
So basically we RX 5700XT users are stuck with ETHASH by Claymore now. Using PhoenixMiner, somehow one of my two RX 5700 will crap out after sometimes and the one that is still mining will still be showing fully loaded after mining is stopped.
|
|
|
Anyone mining with RX 5700, has any of you experiencing strange phenomena where only the one of the GPU is actually mining/or having its memory loaded with mining job?
|
|
|
Try phoenix miner with the following settings: : -ethi 8 -tt 54 -cclock 1300 -cvddc 750 -mclock 910 -hstats 2 I make 52.65MH/s with 93 watts powerdraw and gpu hbm temperature 70 degree C. You can try with higher -tt to decrease the fan speed. 54 works for sure and is too safe.
what phoenix miner version?
|
|
|
Theoritically, you can put Four Reference cards Navi in MSI X570 Godlike. My current tower cooler blocks the first GPU slot. Waiting on 3950X before actually putting the bonus MasterLiquid AIO from MSI X570's promotions. Anyway, I tried with three GPUS (one custom AIO cooled, two reference coolers) and it works just fine. Their temps are not catastrophic either; With fan speeds less than 50% (therefore noise is tame), the GPU temps are around 65-75 oC, with memory junction temp around 90 oC. https://youtu.be/IDsYGdhxayAAfter 3950X is here, I will get one of that and another reference card 5700 and my goal of having four GPUs in one motherboard will be achieved. For now the RX 5700 yiels around 48-49 Mh/S each with maximum GPU temps around 70 oC with memory temps around 90 oC, with fans running below 40 %. This RX 5700 reference design is just great for me.
|
|
|
|