Anyone in the US, any hints on what hubs can be found for under $100 to work with a few of these? oh yeah yeah bro, it's very little under 100 $ dollars, don't just enjoy the results
|
|
|
I understand how long it is easy and rather difficult html???
|
|
|
Semoga aja muncul Dan sebagai kartu ATM alat pembayaran bitcoin Indonesia bisa berteransaksi sebagai alat pembayaran kita sukses bitcoin kita tergantung memenuhi kebutuhan sehari hari dari bitcoin Indonesia itu juga
|
|
|
/* This is just an example, edit it and remove comment lines (the slash and star) !! */ "gpu_conf" : [ { "id" : 0, "intensity" : 13, "double_threads" : true}, { "id" : 1, "intensity" : 13, "double_threads" : true}, { "id" : 2, "intensity" : 13, "double_threads" : true}, { "id" : 3, "intensity" : 13, "double_threads" : true}, { "id" : 4, "intensity" : 13, "double_threads" : true}, { "id" : 5, "intensity" : 12, "double_threads" : true}, ]
/* Make sure not to delete this last blank line */
this is how the end of the config looks like
iya caranya panjang mudah mengerti kaya gitu gan
|
|
|
Anyone in the US, any hints on what hubs can be found for under $100 to work with a few of these? I think there is and there is also no out there
|
|
|
I can't be very good at it
|
|
|
I'm curious if it will work on prohashing.com if you get a chance if you could test that please.
Yes, it's a bit of a walk, not gone
|
|
|
I'm sorry for my English. Phil, can you show photos of your rig with GPUs and wires? I don't understand what 6 power sockets do in this board and how to supply the board by psu without 24pin socket. Thank you.
it doesn't matter, just run it first for the future
|
|
|
I have never used linux or ubuntu. I may should just leave this alone.
I'm also the same as rich, bro, there are no side effects
|
|
|
no interest in selling your miner or dev services?
also is that normal to have the intro pricing then jack it up, whitefire also says its $4k now but 5k + next month
oh it's ok also the price is the possibility is it more up than that
|
|
|
Are we talking about engineering sample? It shouldn't be bad, vram is cooled after all.
yes, according to you, it's not a problem
|
|
|
works with 6990 ?
I feel like I'm more than normal
|
|
|
This is all very interesting to me because I currently use Windows 8.1 for my Nvidia Rig but in the past I have mined with my AMD rigs using EthOS and found it much more stable and reliable, and using much lower resources, etc - so a Linux solution for an Nvidia rig sounds great. I was considering trying the PiMP Nvidia version but when I tried that for my AMD rigs it confused the hell out of me.
Anyway, I have one big question because it doesn't seem clear to me from the small amount of info in this thread whether it will suit my rig. Reason being, my rig is currently 2 x Gigabyte gtx1070 G1 Gaming cards and 2 x Galax gtx 1060 6GB cards.
It seems from what I read above that when you set cc & mc overclock and powerlimit - this is one setting to apply to all cards on the rig. This is obviously suitable for the typical situation where people commonly use multiple instances of 1 type of card on a rig, which I understand - people choose a GPU, buy however many of them and populate the rig with them.
What about a situation like mine though, where I have 2 of one GPU and 2 of another, so I need to be able to specify different OC and powerlimits for the different cards.
Currently in Windows 8.1 I just use MSI afterburner and set each card individually, so for example I mine ZEC and the 1070s are powerlimited to around 68%, core OC to +70 and mem OC to +700, while the 1060s are powerlimited to about 75%, core OC to +50 and me OC to +500. Using EWBF this is giving me approximately 1400sol/s using 500W at the wall.
Since the powerlimit in Linux seems to be set in watts rather than percent, one setting in a percentage (70% would probably work) but I would need to be able to set the 1070s to around 125W and the 160s to around 85W. The CC could all conceivably be set to +60 and MC to +500 or +600 but is there a way to set powerlimits individually for each card?
yes but convincing the bitcoinner that using windowns depends
|
|
|
according to my estimates continue to be (as 1,000 dollars) or more
|
|
|
This is all very interesting to me because I currently use Windows 8.1 for my Nvidia Rig but in the past I have mined with my AMD rigs using EthOS and found it much more stable and reliable, and using much lower resources, etc - so a Linux solution for an Nvidia rig sounds great. I was considering trying the PiMP Nvidia version but when I tried that for my AMD rigs it confused the hell out of me.
Anyway, I have one big question because it doesn't seem clear to me from the small amount of info in this thread whether it will suit my rig. Reason being, my rig is currently 2 x Gigabyte gtx1070 G1 Gaming cards and 2 x Galax gtx 1060 6GB cards.
It seems from what I read above that when you set cc & mc overclock and powerlimit - this is one setting to apply to all cards on the rig. This is obviously suitable for the typical situation where people commonly use multiple instances of 1 type of card on a rig, which I understand - people choose a GPU, buy however many of them and populate the rig with them.
What about a situation like mine though, where I have 2 of one GPU and 2 of another, so I need to be able to specify different OC and powerlimits for the different cards.
Currently in Windows 8.1 I just use MSI afterburner and set each card individually, so for example I mine ZEC and the 1070s are powerlimited to around 68%, core OC to +70 and mem OC to +700, while the 1060s are powerlimited to about 75%, core OC to +50 and me OC to +500. Using EWBF this is giving me approximately 1400sol/s using 500W at the wall.
Since the powerlimit in Linux seems to be set in watts rather than percent, one setting in a percentage (70% would probably work) but I would need to be able to set the 1070s to around 125W and the 160s to around 85W. The CC could all conceivably be set to +60 and MC to +500 or +600 but is there a way to set powerlimits individually for each card?
oh so gitu means more height so much
|
|
|
Last 5 hrs results with Nemos auto algo and zpool:
0.00047437 BTC. Not sure it will be seeing more after full 24 hrs. may need to run for few days for a more accurate daily profit? Still not sure any more fee deduction when doing the BTC transfer.
give and take it will do 0.0005 BTC in 5 hours, this is like 0.0024 BTC/day. which is far from Nicehash 0.0032 estimate! I already feel that 0.0032 BTC/day from Nicehash is not optimised.
Really wish those who has better alternative with 1080ti can share over here.
oh so it's pretty big yes it's big more than it's rich
|
|
|
Yeah but my SSD doesnt show up in there. I have downloaded it. reformat the SSD with rufus-2.9.exe then try it may be windows doesn't see it, I have had the same issues using some SSD , SD, USB sticks etc or try disk part in a windows cmd.the SSD might be formatted with some other OS that windows doesn't like or see for windows fat . if that's your issue . oh karna he may not know how gan know min aja gan
|
|
|
Thx for miner. Why not add Pasc and Zcash algos?
because zpool doesnt have those algo's atm..although i think they in process of implementing equihash very soon.. also they not that profitable for me with the 1050ti and 1070's they about the same profitability as ethereum atm.. with the right core UC and memory OC : ) oh so I just know I'm still a formula
|
|
|
|