 Show Posts
|
|
Pages: [1]
|
|
Hi All,
Im trying to set up an account, I get Failed to update your account: Invalid coin address when I put my BTC wallet address into the wallet page, I have set default payout to BTC but 3 different BTC wallets wont work, any ideas?
Thanks
|
|
|
|
|
Hi All
I sent 0.05bct to an ICO, have transaction ID and wallet and everything says success, but it says pending and they are saying it has not come through.
Any advice?
Thanks
Ben
|
|
|
|
|
Hi All
I setup my Trezor and sdetup myether with it, problem is as I was doing it I kept stuffing it up, by the time I have it done I am not sure I have correct trezor passphrase or myether private keys as I did it so many times.
Is there a way of exporting my trezor 24 word passphrase and as my myether wallet is in it if I recover the trezor with the passphrase will it auotmaticaly link back with myether or do i need that private key aswell?
Or is it best I send all my coins to the exchange, wipe the lot and start again and bring it back?
Thanks
Ben
|
|
|
|
|
Hi all,
New to mining, anyone noticed a dip in last couple days in Scrypt returns, My nicehash has definitely taken a downturn, is other pools doing same?
Thanks
|
|
|
|
|
Hi All,
I transferred my first mining earnings into bitrex from my nicehash wallet tonight BTC to BTC, I got an email from nicehash saying it was successful yet 1hr later nothing in bitrex, the bitrex BTC deposit wallet is correct in nicehash but I cant see anything in either of the 2 wallets on blockchain site when I search it.
Any ideas please?
I have a cancel withdraw button still available on my nicehash wallet but I got an email from them saying it was a success over an hour ago.
Anyone seen this before or can help?
Thanks
|
|
|
|
not so good news
Nov 1-15 batch is being shipped.
I got the confirmation and tracking number.
HOLY SH1T... Get ready for crazy time ahead...
So your telling us everyone ordered for november batch are being shipped now? Can anyone else confirm this? So your tracking actually shows shipped and is on the way? If so, thats crazy. Im still waiting for my order and tracking number. But thats for november 21. Anyways anyone else got this shipping confirmed for november 1-15 order? Haha and yimour right, its going to be a crazy month. Yes, its being shipped now. check those images for verification. So we all got fcuked hard ... X11 is a red zone now. watch-out, x3 of the network hash rate increase in next 10 days!! Dont panic, when D3 hit the market they took over, next batch takes 50% profit, next batch 33%, next batch 25%, every new batch the impact gets smaller, x11 coins only have to go up 20% in next 6 months and they start to overcome the batches of D3's hitting the market as their impacts are smaller and smaller. People trying to make a living from mining are the ones who should have done more research, in a business you only buy an investment when the ROI is under 2 years as thats considered a good investment, there are no quick rich schemes, the D3 never was one and still is a very good investment. If you got Solar installed and ran D3 for a year it would not only pay off itself but the solar, no brainer |
|
|
|
You can buy 7 D3s for the price of 1 A5.
But bad side is that it will consume 7 times more power  True but if 3 machines just paid the power for the group then 4 are left to almost double the A5 returns and the A5 still has to pay for its own power. The A5 is a day late and a dollar short and insainly overpriced |
|
|
|
My 2 Antminer L3+'s run about 40c on the PCB and about 50 to 60 on the Chips. Also nice quiet around 40 decibels. I switched out the default fans for 2 Noctra Industrail PPC 3000 rpms. I cut the cord for the PWM and made then run full speed all the time with a push pull method. I also fixed some airflow issues inside the miners after 30 days. I pulled the boards out and noticed a black rubber on one of the sides causing airflow blockage. I removed it and airflow around that back board increased and temps went down.
I also noticed sometimes the miners will reboot couple times a day. I found out why. Most antminers in the bitcoin line like the s5 and s9 have the queue set to 8192 or 9999. I found that the firmware in the Antminer L3+ runs the queue at 1 and if you mining with 288 chips this is too low. The only fix is to log into the miner using winscp and goto \etc\init.d and find the cgminer.sh inside that removed the -T and --syslog and replace it with --queue 9999. Save it and then apply your pools again. The problem is if you shut down and turn back on it resets it back to queue 1. Bitmain really needs to fix this in a firmware update.
After I made those changes though it runs very stable above 500 mh's on many pools.
Wolf, interested in learning more about the fan, I live in a high temp environment, have 4 L3+ and 4 D3 coming. Is this a modification I could do in temps of 35c? of the new fans dont flow enough for theat. Look forward to learning more, thanks for your info |
|
|
|
|
Who knows, dash is low but other x11 coins have been much better, every batch isn't another half, the first is half, the next is half of a half, and so on, so more machines than impact softens
|
|
|
|
|
Why would you sell it, I have 4 coming, i understand people are upset that they cant get ROI in 2 or 3 months anymore, more likely 9 but in 9 months you will have the equivalent in coins and a machine still ticking over.
The object is to buy the machines and save the coins for future value, if you want money now mining is never the answer.
|
|
|
|
|
Hi All,
If you had to chose one which would it be between D3 and L3+ for mining into 2018 and why?
Thanks
|
|
|
|
|
New to mining, will only antminer s9 be able to mine this, would l3+ be able to or no?
Thanks
|
|
|
|
|
thanks for your reply, I was talking USD per month
I have the power and machine settings the same but the outcomes are wildly different.
|
|
|
|
|
Hi All,
Has anyone got any back to back data on which calculators are most accurate, for example What to mine and cryptocompare are within 100 of each other for x11. When I run the same simulation on nicehash for the D3 it comes back as well over 1k better.
Am I missing something, understand they are only predictions but while Im waiting for my equipment to arrive I am following current trends just for forcast potentials and RIO predictions.
Is the Nicehash one wildly wrong or am I too new to not understand the differnence, I also did it for the L3+ and the Nicehash was double, if thats correct it makes my pool choice pretty easy anyway.
Thanks for any feedback and please dont turn this into a bagging session about pools and websites just honest feedback about recent actuals of D3 and L3+ so comparison purposes.
|
|
|
|
|
Hi,
I am using awesome miner, I have nicehash and Zpool ticked in general under miner.
I have my Bitcoin address in the window next for each, the Zpool is showing on zpool website but Nicehash is not.
Am I doing something wrong, I have nicehash account with same BTC address but it says nothing has been done is last few days but I have seen it mining through nicehash on awesome miner.
Any advice please?
Also any other recommendations of pools to chuck in with those 2.
Thanks
Ben
|
|
|
|
|
Hi All,
waaaaay to much to read through so sorry if i missed it skipping through but I am looking for an option to mine any coin but get paid out the value in the specific coins I chose.
Does this do that please?
Thanks
Ben
|
|
|
|
|
Hi All,
I am looking at getting into mining, I am happy to buy a couple L3+ but I dont know enough yet.
I know they are mainly for Litecoin but can it also mine bitcoin and the other cryptocurrencies?
WOuld anyone have a recomendation for something with high performance and versatility?
Thanks
Ben
|
|
|
|
|
