 Show Posts
|
|
Pages: [1] 2 3 »
|
Hi guys
I have been using ZEC's EWBF miner for months now and it works fine, but I have never managed to get DSMT miner to connect to any of the pools that I can use with ZEC EWBF
running it in a cmd window I can see that it is erroring due to "connect failed" but I know the config is correct as it taken from a working EWBF miner.
I have a hardware firewall and the ports are open for the pools Im mining on and very little else, I have looked to see if DSTM is making a system call to dial home and cannot see any attempt to connect elsewhere and I also cannot sea any blocked packets on the firewall so Im lost as to what address is failing to connect to.
I have tried 0.58 and 0.6 and tried to connect to several pools that work with other miners so it is something DSTM is trying to connect to but fails, does anyone know what IP address or port I need to open, Im guessing this is for it to send the dev fee?
It used to always try to connect to Flypool to mine for a dev, if this failed, the miner didn't work. Few peoples complained, that when Flypool has issues, the miner doesn't work anymore, so maybe he added some more pools, but at least make sure that the Flypool is reachable. |
|
|
|
WTF is with some of you, my temps don't exceed 50C, and you're running your cards at 75+?
How will it be when the outside temp is like 40C at summer?
Also your fans will die in like few months.
Do a custom fan curve for gods sake and open your windows, or install an AC for the summer months atleast.
I'm also mining with Claymore on two reference AMD R9 270 2GB cards. As I said, reference design, so with very poorly designed cooling, they both running between 80-85°C and both are running fine for whole one year  So no, I think his fans will probably not die in months, nor the card. Until 80°C it should be fine, he just can't reach higher nVidia boost clock speeds. Best way for him is to try reduce power limit and compensate with higher boost clock on core, and highest possible stable memory clock. |
|
|
|
How can I run DSTM under OS X Terminal?
You can't unless you run Boot Camp (install Windows) on your Mac. It is Linux or Windows program, not for OS X operating system. |
|
|
|
Hey guys Anyone have issue with SHA-1 on this file ? It seems last version available dont have correct SHA-1 as result. Is what i get for zm 5.8 as SHA-1 with QuickHash 42F586F88866FA6D41E3E1CB91614C6E638B0905 Be careful ... You hashed the zip/gz file, but you must hash the ...ehh...whatever it is called on Linux, in Windows it is .exe (executable) file |
|
|
|
Hello all,
How long we can mine with Gigaybyte GTX 1060 3GB before DAG file will make gpu unusable?
I was wondering if I can safe some money with these cards in my next zcash rig build.
Your answers are appreciated!
Regards,
Cryptofish
ZCash does not have DAG file, or anything similar as far as I know that would limit your mining ability. |
|
|
|
Hello dstm,
Thank you for your great work. I have been using your software to mine for a while.
I would like to ask, if it possible to make your software "restart" after a cuda memory fail on a gpu.
I have several rigs running and I am not always checking on them, it`s not nice to see that I had one rig not working for a entire night or day because there was a error.
This happens more in rigs where I have 6 different gpu`s from nvidia, it`s not easy to find the best OC. So if, a error happens, it should be logged and the mining should restart. That way I would check for the logs and know that I should reduce a OC on a gpu but i wouldn`t lost several hours of mining.
Thank you very much and keep the good work.
Sorry about my poor english.
You can use this command line script to let it run in loop: :mine
timeout 60
cd dstm
zm --server ssl://eu1-zcash.flypool.org --port 3443 --user t1N1eJnRtQuyai6ewvQsaJe3ACWAvHykqhu --time
cd..
echo DSTM MINER RESTARTED AT %TIME% %DATE% >> dstm_log.txt
goto mine It is for Windows, miner is in folder "dstm" and bat file is one level up. |
|
|
|
How to OC ?
MSI afterburner does not work
It does not start, it does not work completely, or it will not apply your boost to Core clocks? If it does not apply only core clock, try to run Google Chrome along with DSTM miner and check if it works now. |
|
|
|
Don't count shares if you don't know their difficulty (value), count total Sol/s. I guess your pool show somewhere total hashrate of your workers, and that matters Soooo... if I have more hashpower am I getting more difficult shares or what? :S Maybe (why not), but they will have higher value of course. Try mining ZEC on Flypool, there is fixed difficulty, accurate hashrate reporting, nice graphs, so you can easily compare if your two cards mine more than just one. But you should let it run for at least 24h to get accurate average hashrate. |
|
|
|
Hi guys, is it possible that I'm getting more shares with single gpu in my gaming rig than with two??
I've been mining zclassic with a 1070 on mining pool hub for a week now and was getting something like 2.3 shares per minute on average.
Yesterday I added a 1060 6gb on a riser and now I'm getting about 2.1 overall (1.4 with 1070 and 0.7 with 1060)...
I'm really confused... I've got shitty spc vero m1 600w psu, the workload is around 270w (became really noisy). Can it be the source of problem or maybe something related to dstm's miner?
Don't count shares if you don't know their difficulty (value), count total Sol/s. I guess your pool show somewhere total hashrate of your workers, and that matters |
|
|
|
Hi, love your miner! Getting average of 730.8 sol/s with a 1080ti at 85% powerlimit +177 core @57 oC. Much better than EWFB's miner But I have a small "hobby rig" and was curious if support for kepler gpu's will be available? Please say yes  If not, why?  Thanks for a great miner 1080ti crashes at those settings in less than couple hours if not right away. Nice try. hobby rig of k80s? You can get pretty good FPS in Crysis on those... The miners work on all Nvidias as far as I know. May have to recompile them from source. Send me your rack of 8 k100s and I will do it. I have done it for AMD, CPU and other Nvidia miners. My MSI GeForce GTX 1080 Ti GAMING TRIO works pretty fine on PL85%, Core +175, Mem +535, Fan Auto ~48%, ~68°C = 749 Sol/s in DSTM |
|
|
|
lul thats stupid man.
ewbf = 3049
dstm = 3099 - 2% = 3037
Why use DSTM if earning less ? Makes no sense. And yes, --fee 0 works in EWBF.
Lul, guys here were right you are pretty stupid. Not stupid but actually dumb  3099 is actual numbers from pool. But of course brain dead people does not read or actually try something, they just whine all around See? I'm glad you finally found out yourself |
|
|
|
Sorry if this has been asked before but with a quick search I couldn't find it mentioned anywhere. Is the sol/s displayed the effective hashrate (meaning minus the devfee) or with the devfee (meaning our effective hashrate is the displayed sol/s*0.98)?
It is total hashrate, so you have to multiply it by 0,98. |
|
|
|
Also I'm registering some problems with DSTM's ZM miner 0.5.8 while reconnecting to the pool (it happened just twice for 14 days - nothing terrible): Computer si WINDOWS 10 ENTERPRISE LTSB 2016 64-BIT, MSI GTX 1080 Ti, 100 Mbps wired network, uptime around 4 days. On other computers I'm running 0.5.7 and it never happened yet.  |
|
|
|
So specially for you take a look at this:
"I DO hope you can get it working under Windows 10. Cheers"
as a reply for:
"Here its a working program for fee remove"
I dont care about fee removal, all my statements related to GDDR5X performance on DSTM vs. EWFB, if you do not even have rigs with this cards just pass my posts. I never said you have something against fee, but you just jumped into long going discussion and called me stupido in first post, and later even dumbass, without trying to understand what was this all about. And I never said anything about GDDR5X performance, as I said, this dev fee discussion was long going and what I said to fecker was only because of our previous discussion and because of his support for third party software to remove fee. And BTW yes, I also have one 1080 Ti in my rig. Nevermind, I guess, we finally cleared the situation and do not need to insult each other anymore. |
|
|
|
Charging 2% here from all profits is just ridiculous , this guy is making millions monthly yet he hides behind anonymity and brilliant "customer service" (yes, you are paying him).
This pretty much. I DO hope you can get it working under Windows 10. Cheers  Any 1080 (Non-Ti) users here??? How about your hashrate when using DSTM miner???
Yes, standard 1080 FE, running 0.9V(85% TDP), can get ez 2000MHz, but doing 1974MHz, watercooled, keeping it at about 37C, XOC bios(may affect sols in a negative way), +550 on mems. Doing 570Sols with EKWB. DSTM is not good for GDDR5X cards(1080, 1080Ti). If you can do 570 with EKWB with 0 fee, why would u do 570 x 0.98 (2% fee)= 558.6 with DSTM? Doesnt make sense. Fecker, don't you wanna get the "feck" out of here, please? And oh BTW, it is not EKWB, it is EWBF miner you are using, so use it and stop bitching at DSTM thread about fees again and again... EKWB is company that makes watercooling solution. Quote specially for you mind disabled fella @Atronoss - dude stated some facts and calculations about his rig and observation on GDDR5X and here you jump in telling him what to do. So specially for you take a look at this: "I DO hope you can get it working under Windows 10. Cheers"as a reply for: "Here its a working program for fee remove" |
|
|
|
So:
yes, you can turn the devfee off.
yes, if you do, you will mine slower. reason - IAW the devfee string log, it will mine in the dev's pool. It just will not deposit the coin.
at the end, we didn't make the program. Give credit where due. if you don't want to pay the dev fee, then try to learn to write your own.
I have no issues paying a fee. I think 1% is more reasonable, but im not a coder and can't complete with them.
Hey, this "discussion" has started from GDDR5X card performance on DSTM vs. EWBF, and one of the users stated (and was instantly insulted by a dumbass in this thread) that in current DSTM performance state EWBF outperforms it on GDDR5X cards + you can turn off fee or set to 1% if you see it is more reasonable. From my side this was not question about fee itself but performance, and why someone must pay fee on less performing miner... Currently i am running 6x1080 rig on flypool on EWBF for 24 hrs and will switch to DSTM to check real situation in GDDR5X EWBF vs. DSTM Fee or not to fee is not the question, though 1% to me also would be prefferable, if you make 100K or 50K per day i dont see big difference, i would live with 10K per day.... If dev see that this is his lifetime opportunity to build a "fortune" that is his choice. We as users still have choice of different miners/algos/pools etc. Hey dumbass (yes, you) this discussion started many posts before, by fecker and one other guy, that was complaining about fees as well, and developer clearly stated out, that he will not reduce fee (and many of us support that). Anyway fecker still whining and complaining, and ok that’s maybe fine, but it is not fine, to clearly express under this thread his support to guy, that makes software to disable the developer fee in DSTM. Such a support doesn't belong to any thread and especially to this thread. If you disable devfee by a third party software, you are not stealing from just developer, but in some way from all of us who pays him (all of us who understands some basic principles of business and also moral). It had nothing to do with GDDR5X. So please, first read, or just STFU, before you call someone dumbass... ...comprende stupido? Thanks! |
|
|
|
Charging 2% here from all profits is just ridiculous , this guy is making millions monthly yet he hides behind anonymity and brilliant "customer service" (yes, you are paying him).
This pretty much. I DO hope you can get it working under Windows 10. Cheers Any 1080 (Non-Ti) users here??? How about your hashrate when using DSTM miner???
Yes, standard 1080 FE, running 0.9V(85% TDP), can get ez 2000MHz, but doing 1974MHz, watercooled, keeping it at about 37C, XOC bios(may affect sols in a negative way), +550 on mems. Doing 570Sols with EKWB. DSTM is not good for GDDR5X cards(1080, 1080Ti). If you can do 570 with EKWB with 0 fee, why would u do 570 x 0.98 (2% fee)= 558.6 with DSTM? Doesnt make sense. Fecker, don't you wanna get the "feck" out of here, please? And oh BTW, it is not EKWB, it is EWBF miner you are using, so use it and stop bitching at DSTM thread about fees again and again... EKWB is company that makes watercooling solution. |
|
|
|
Hi, this version really needs a fix.
If my rigs lost connection with the server, miner just stops the software and closes. It is supposed to try to reconnect with the server, but is not doing that.
I have my rigs connected with powerline adaptares, so the connection brakes for 3 seconds 3/4 times a day. I NEED A FIX PLS!
I don't have this problem, but maybe simple script might help you? Since it will keep running miner again and again... It's for Windows, miner is in dstm folder, script one level above, and I think you can lower the timeout in your case. :mine
timeout 60
cd dstm
zm --server ssl://eu1-zcash.flypool.org --port 3443 --user t1N1eJnRtQuyai6ewvQsaJe3ACWAvHykqhu --time
cd..
echo DSTM MINER RESTARTED AT %TIME% %DATE% >> dstm_log.txt
goto mine |
|
|
|
Well first of all, I would expect the owner to respond. Other ppl should stay quiet. You are not his bodyguard or anything so ...stay small, use whatever program u want to use and thats it. No need to come here and talk for him while it should be him talking for himself. period.
Other than that, yes Im using EWBF miner with 0.5% fee. he abandoned the project, but still he created the program so I will give him 0.5%. If he kept updating he would get more. Simple.
But giving out 2%(and Im saying it again, IT IS MORE THAN 2%, check google and search for proofs), thats just no. its not justified. If the program was 10% better than EWBF's that I would say "its not reasonable to use EWBF anymore"....
Im out, until the owner speaks. Pce...
He already responded few times, believe or not, I read all 100+ pages of this thread... he clearly stated he won't change dev fee. I'm out too... |
|
|
|
For me greed is to take some other man work, and use it for my own profit only... without realizing, if there would be no profit for author, he might never created the software in first place, and therefore, we would not have any profit at all. Even if he would set 3%, I would use it, because for me not only speed has value, but also reliability, usability. And I don't care if he makes 100$ per day or 10000$ per day, because what I get from my hash rate is 98% for me, and that is 49x mores than what he will get from my hash rate. Don't be envious and don't be greedy. I will never believe in your goodness, that you just saying this, because you want to help him get more money, because more people will use this miner, if they can reduce dev fee... bla bla bla... Just use EWBF if you want to disable dev fee, because you are envious. Rest of use, will use overall better miner and we will gladly pay for that. And yes, there is already lots of us, if you look at what you saying is his address at Flypool. Also you can see, that his hash rate constantly rising. BTW... I wonder how would car industry looked like, if we could set the price of our new car... I guess, there would not be any cars at all, you want that? I don't, I like my car even when it comes with high cost Also thinking about Linux, it is also free, anyway, majority of ordinary users (not miners) use Windows anyway, because it is... better  (I guess I should not said this here ). Anyway I don't have anything against you saying to him: "Please consider lower the dev fee..." but saying, he is greedy, he SHOULD (he should not do anything, he doesnt work for you, more or less you work for him), or do it because of this and that (beeing smartass)... that is what I just don't like. |
|
|
|
|
