Show Posts
|
Pages: [1]
|
Same issue with my miners!
|
|
|
Hi all. Has anyone got a x10 CE certificate copy? Customs has stopped it and said that it will not be released and will be destroyed if I wont provide CE certificate.
My Baikal Giant-B is stuck at German customs authority ... and I fear that they will have to send it back to China as the devices miss the CE confirmity declarations. Did you get your Baikal miner shipped to your place? Did you get any help from Baikal? i got my giant x10 without problems you have to call them and ask what they need. they need basically: 1. import instruction 2. a proof how much you paid for the miner (baikal put a invoice around 300$) I don‘t think these miners have a CE certificate. I was lucky: Mine got shipped via DHL Express right to my door (Germany). Have you asked Baikal about a CE certificate? Without one it‘ll be pretty difficult. I‘m not sure if they are even allowed to let it pass without one.
|
|
|
Yes, I know that there are no two new algorithms for the new image.
I just want to update to v1.1 because of the dropouts from the Miner.
Can you possibly give me some instructions on how to install the new image on it?
I need to remove the backpanel by unscrewing the 4 screws. Then pull the hashing boards out a bit. On one side one side is the orange pi connected via GPIO pins. Pull the orange pi up carefully and remove be micro sd card from it by pushing it in until it clicks. Now you can flash the image onto the sd card. Remember: your pools and other data will be wiped, so better save them! Now rebuild the miner: Put the sd card in the orange pi, stick the orange pi on the GPIO pins, slide the hashing boards back in and install the backpanel again.
|
|
|
Anyone knows whats new/different in the new firmware V1.1? Should I upgrade, even if I have no problems with my V1.0? A changelog would be awesome....but I guess this doesnt exist at all.
cheers
From a mail from Baikal: If your baikal X10 works fine,you don't need to do the update. Only have some setting about enable-nicehashsma :true I updated and cannot see any differences anywhere.
|
|
|
Warum wie warm werden denn deine Miner?
bis zu 48 Na das ist ja eh noch recht anständig. Die Miner im Keller laufen aktuell mit 55 - 57 Grad... Aber X13 ist auch ein echter Stromfresser... Welchen Algo fährst Du denn? Meint ihr nicht, dass da ein bisschen warm ist? Ich habe nachgefragt und laut Baikal sollten die temperaturen unter 40°C bleiben. Meine laufen auf Quark mit 50% Fanspeed bei 31°C (14°C Umgebungstemperatur). Don´t you think that´s a bit hot? Ask asked Baikal and they say that the recommended temperature is unter 40°C. Mine are mining Quark with 50% fanspeed at 31°C (14°C ambient temperature).
|
|
|
Mine just arrived. Did everyone else get ones with the back plate on them or no? My back is just exposed to the boards.
My miners backs are exposed too. Are yours looking used too? Mine are pretty scratched and immediately started mining at 100% fan speed for many preconfigured pools. Is there an option for automatic fan speed? I manually set mine to 40% as running at 100% is just unnecessary noise.
|
|
|
Hello, I got the AWB number today from Baikal. But there is only "1 number" with "1 Piece" and i ordered multiple devices... Could somebody who ordered multiple devices and received them already let me know his experience?? THANK YOU :-) Best regards Finally, some positive news. At least you got some kind of update. Still nothing for most people. Did you also receive the email mentioning December 5 or December 11? And what country are you in? Just received my tracking number as well. I ordered 2 X10 and it also shows up as 1 piece.
Did you also receive the email mentioning December 5 or December 11? And what country are you in? Last mail I received was the one announcing that all miners will be delivered before 11 december. I‘m from Germany.
|
|
|
Hello, I got the AWB number today from Baikal. But there is only "1 number" with "1 Piece" and i ordered multiple devices... Could somebody who ordered multiple devices and received them already let me know his experience?? THANK YOU :-) Best regards Just received my tracking number as well. I ordered 2 X10 and it also shows up as 1 piece.
|
|
|
You have it on nice hash?
Yeah, I didn’t know which pool to use besides nicehash as Zpool wasn’t paying much when I was running my A900 on there. Any recommendations ? Or algo I should mine ? Currently NiceHash (Multi-Algo) seems to be the most profitable one (see: https://ibb.co/jAWR7m), but zPool (Multi-Algo) is getting closer and supports myr-gr & skein too. zPool also supports custom factors for automatic profit switching, so you can include the different hashrates and power consumptions. When did you ordered, payed, got your confirmations and waybill?
|
|
|
Anyone else here still waiting for a tracking number? Haven´t received anything yet, even though I´m in the first batch :/
|
|
|
Has anyone ordered through the Bank?
USD account number: 451-906-071-4 Beneficiary: VITCORE HOLDINGS LIMITED Ajeltake Road, Ajeltake Island, Majuro Tel: 692 247 3018 Fax: 692 247 3017 Bank Details: Bank Name: United Overseas Bank Limited Branch Name: UOB Main Branch Address: 80 Raffles Place UOB Plaza 1 Singapore 048624 Bank Code: 7375 Swift Code: UOVBSGSG Branch Code: 001.
Nope this is not the Wire Details, Its look like you are being ripped. Sorry for you loss. Cancel your Wire if you can. yeah i hope you didnt send any money No, I did not send money, did I want to clarify this real bank or not? I can confirm that this is Baikals account. I payed my two X10 from the first batch via that account.
|
|
|
New mail from Baikal: Hello,
Thank you for your patience and understanding.
The delivery date of First batch is coming closer, we are just doing some final preparation, so as soon as miner is ready, we can send them out.
For custom issue, after several checking with our custom staff, now we have the final answer. For miner we will write 211usd as its value, description will be "CASING COOLING FAN ASSEMBLY", Kindly note this.
We will offer your waybill as soon as we have them.
best regards. Baikal miner
|
|
|
Can someone tell which power supply I need ? And how can I start the miner? Is there a start button on the miner?
How loud is it? Can I run this in a small room?
Any PSU with 6x 6-pin ATX works. With the currently known algos at least 800W, but definitely go higher (future algo may require more and better add some as a buffer)! Baikals statement: I asked Baikal about the recommended power supply and here is their response. "1200watt is recommended. Need 6 standard 12v 6pin connectors"
My L3+ automatically turns on as soon as power is available, so probably no button. Theres no information regarding the noise level. I expect ~60 dB, like other miners. Running the miner in a small room shouldn´t be a problem, but: Keep the generated heat and the noise level in mind. If you plan to run this in your home do not underestimate the noise level.
|
|
|
I´m mining STORJ as well, but only "for fun". Last payment was in mid october: 6,37 SJCX (2,9$) for ~600GB. Gettings contracts is indeed very slow. It took me about 2 month for my 600GB.
Are Burst and Sia more profitable?
|
|
|
You guys see the pics on twitter. Looks like they are close to being complete. They now have 6 pcie connectors. Their post "we are waiting" I assume was due to the lack of interest in the 2nd batch. However I feel like those of us from batch 1 are the ones waiting. Anyway it looks like things are progressing.
Can you share this picture here please? Here you go: https://twitter.com/baikalminer/status/921594611448954880
|
|
|
I used Shapeshift to transfer some LTC. I asked for BTC instead of LTC as well, but they denied.
|
|
|
Received a similar mail: Shipping charge in LTC:3.58
Wallet address: LSxLfwC4qngKsnvR1ixhLfhWJ61BTH3PMa
Kindly note this quotation only valid for 2 hours since we sent this email, if you are unable to complete payment during this time, do not hesitate to contact us for recalculating.
After you made the payment, please send us the TXID code of your transaction and a screenshot of this transaction from your wallet or your platform account.
Delivery will by DHL/UPS(depends on your country)(Russia will be S.F.Express)
Thanks for your always support on Baikal miner.
|
|
|
Currently on the product's page say:
1). Currently we only accept payment by BTC, DASH, LTC.
Has anyone paid with bitcoins? Is it better than bank transfer?
Crypto should be easier, faster & cheaper than bank transfer. My bank charged me ~30€ (36$) for the transfer.
|
|
|
Current status on my order: ordered on 13.09, payed (wire transfer) and sent the proof & passport copy on 14.09, received confirmation on 19.09 (directly from employee, not baikal@baikalminer.com). They are going to contact me again for the shipping.
|
|
|
|