UPDATE:
I watched it again, the exact message is:

DevFee: stop mining and disconnect

Then crash

Didn't hear back on this, so I did some more trial and error.  I switch from dual miner to single miner for ETH only.  Sat and waited......

Found that after mining for DEV, instructions were to "STOP AND DISCONNECT" or something along those lines.  And I watched as my computer just shuts down. 

Anyone know how I can stop this?

I've been having trouble since late September release.  Computer locks up and restarts.  Computer runs fine as long as no mining.  Tried disconnecting one gpu at a time to isolate to see if i had a short in one, but still same.  Even adjusted clock settings, same.  Seems like something with mining program or some update

Win10, (4) 1070's, v11.9, GeForce driver 411.63

Any advice?

I seriously wish I knew!  I have a local and external backup.

And I love this coin, for the record.  This was the first coin I mined.  However, I am not a cryptographer and just think it would be more helpful to understand why this happens for reasons other than Windows updates and why it can't be improved?

The only thing I can come up with is that when I mint X number of coins and before confirmed, there is an issue with the wallet.  I do not check on this throughout the day, but every other day or so.  My theory, (admitting that I could be way off) is that my orphaned mint is in limbo until I find out my wallet crashed; which may be 1-2 days later.  I then restart my wallet, but the confirmations have passed me by... resulting in my dilemma of missing coins.  (Gripping example below)

For example, lets say my wallet crashes.  I last did a back up at my last mint reward.  Lets say I had 10 DMD and received a reward of 1 DMD.  (This is hypothetical of course).  I then make a back up for my 11 DMD wallet.  A week goes by and Mr Gates at Windows decides green is the new blue and pushes the "CHANGE EVERYTHING" button which causes hell for some of us who are foolish enough or forced to operate on his OS.  I find out a day or two later that my computer restarted, wallet crashed, and begin the recovery process.  Upon initially restoring my back up DMD wallet, it shows I have 11 DMD.  These could be described as TOTAL or IMMATURE, but who cares, I still have my DMD!  After syncing with the chain, I look at my DMD wallet again, maybe after a day or two, I only have 10 DMD.  This situation has happened thrice.

Again, I don't know if what I am saying is completely stupid, an isolated issue, or something others have experienced.  All of this comes from someone who doesn't know the inner workings, only what I've seen and learned.  I am not blaming the team or the product, shit happens sometimes, but it would be nice to have a wallet that is able to restart itself or something?  I remain invested in DMD and have no intention of leaving, but would like to just share what I've experienced (and hopefully receive some feedback to help me understand more).

If I had to pick my top three reasons for being in volved with DMD, the HELP would be 1

(most, but at least the most important) Issues resolved, thank you

(After the sync, I still lost the DMD that disappeared on my last crash, but I'd rather lose 10% than 100%)  

Thank you

Seems like a bug in the wallet... 

I've got things moving in the right direction; I opened the wallet so I could access the dmd ion in bottom right corner, clicked on icon in bottom right to "open" the miner (although the gui was not visible, but the dmd icon was shown on the task bar). 
I then hovered mouse over, the small preview window came up, and I right clicked on it.  I had already tried restore, so I tried maximize and it popped up. 
However, I can now only view gui in full screen.  I had to move my dmd files back around to get the correct ones in place because I had been trying different back ups and was losing my mind thinking I was going to lose more dmd...
I thought I was good late last night as it was syncing AND I could see it! 
I was ecstatic this morning, as my most recent (last crash) disappearance of dmd was back!  (Although says my entire balance is Immature)  It was stuck on 3 weeks behind and I thought that was odd because it had never taken that long to sync. 

As of now, at night, it is still stuck on three weeks behind.  I tried to restart, rescan, and recover transactions 2, but no luck.  Files are not in typical AppData folder.  Additional help would be much appreciated!

Last time I had a problem with the wallet, this is what I did (#23) and it solved it.  It crashed, I did #23, and has since crashed maybe 3 times until the one this week.  The crash I experienced this week is when things changed.  I re-did putting the shortcut in a folder as suggested, but am still experiencing the same issue.  It seems like the wallet is running, I can see it in my process explorer, but I am unable to view the GUI.  I can pull up the menu by right clicking on the dmd icon in bottom right corner, but cannot view the GUI.  It does show me all menu options; Show/Hide, Send, Receive, etc.
 Any other idea?

Letting it "run" I just got an incoming transaction from February 2018...  But I am unable to see the wallet at all.  (I already tried #18 for the record) and salvage wallet, and upgrade wallet format - which is right before I received the transaction....?

Hey guys, having an issue getting my wallet to load after a crash (Win10).  The normal deleting of files isnt working, but its weird because I can see it running in process explorer and I have the dmd icon, but cannot actually see the wallet.  If I right click the icon in the bottom right it brings up the dmd menu, but I am unable to see the gui wallet?

Hey thanks for the help.  I downloaded the new wallet, but nothing has changed.  I even tried deleting the files.  Anything else I could try?

Support...

Ive been having trouble with my wallet for the past week.  I thought it would be the usual fix for computer updating automatically and shutting down.  So I went through and deleted the files in my AppData, but not the fix this time.

The wallet starts to sync, but freezes at some point and I've even tried to redo these steps with no luck.  I have been stuck on 13 days behind" for two days now.  Block 132029 with 23 active connections

I have the correct balance and I was able to unlock my wallet yesterday, but its still stuck and not minting.

Any help would be greatly appreciated, thank you

DMD is on my top 5.  I agree with the community being a big part of the popularity.  

It also helps to have a rep present to answer questions or concerns.  

The only downside I have experienced is discontinuing mining.  I love the environment and all, but I do miss those days...

I take that back, the orphan transaction is shown twice.  Upon hovering over, one states it is the orphan transaction and does not impact my holdings.  The other says that it is immature and has xxx number of confirmations and and will be available after xxx many more.  They both have the same date of October 5th though.
Maybe I just missed this process when minting previously, but then again, this is my only orphan. 

hmm, never done that before, and I don't see any new diamonds, but I guess I'll keep an eye out. 
Thanks for the insight

So I'm not sure what happened, but something happened... Any information would be greatly appreciated.

- Have been running wallet straight except for unexpected restart Wednesday thanks to Windows 10 update...
- Wallet is unlocked for staking, do not have enough for masternode.
- Yesterday all was well and have not had any power loss since Wednesday
- Latest version of wallet
- Not mixing

I bought a small amount of diamonds October 5th and transferred to wallet.
Same day, prior to the purchase, I generated an orphan block and have not had anything mint since.
I was already holding and staking diamonds.

Today, the diamonds I bought a month ago are showing as available.
The rest of my diamonds are showing as immature
Zero are pending
The total reflects the sum of the two.
I can still see the orphan block in the transactions, but it obviously doesn't count toward anything

Any thoughts?

I have one of these made with PVC on Ebay.  This is completely ready to assemble and you can buy with or without GPU.  It is broken down in easy to assemble pieces to ship.


https://www.ebay.com/itm/Mining-Rig-4x-GTX1070-NVIDIA-Ethereum-plug-and-mine-ONLY-MODULAR-RIG-on-EBAY/322687360013?hash=item4b21aa5c0d:g:KJ4AAOSwmZFZpyzW

Also.... did you send it to your DMD wallet on Bittrex?

Try the suggestion below, or what I did in a few posts up.  If its not showing up on the block chain then your wallet files may have been compromised.  Your best hope is to find an older wallet backup file to load from. 

Please check with this item 18. Q: https://diamond-info.github.io/#q18

Hey, thank you for the suggestions, but I had already tried that.  I tried it again in case I missed something, but it still didn't work.  Something funny was going on, so I took the steps below and figured I would share to hopefully save someone else some hair loss. 

Luckily I had made a copy of all the files in my DMD Roaming folder.  I pulled a backup file of my wallet and renamed.  Then deleted all files and put in folder with diamond.conf, masternode.conf and folder backups

Restarted wallet and coins are back!  patted myself on the back and happy i had a copy

I had power loss and when I restarted, my wallet would not start.  I did the reboot by deleting all but 3 files, but now I have 0 balance.  Any ideas?