 Show Posts
|
|
Pages: [1] 2 »
|
Try to set -gt for rig 2 manually the same as on rig 1.
Maybe the problem is that on rig 2 cards with worster memory than on rig 1...
Cards from the same batch. I used the Claymore for more than a year, until it stopped working, there was no such problem and the speed was 30Mh+ After set manual -gt on rig2, speed has not changed in any way Cards the same all? It's very strange... Rig 2 take more power but speed is lower... Windows and drivers the same too? Video bioses the same on rig 2? Rig1 and Rig2 use one driver - "main OpenCL driver version: 19.12.1". Windows 10. The bios has not changed anywhere. There are differences in RAM, on Rig1 4Gb, on Rig2 8Gb. So rig2 have different type of memory. That's the problem. You need find best straps for youre type of memory and modify vbioses or apply better straps with some prorgam like AMD memory tweak tool. Did you tried -mt 2? I did not write correctly, differ in RAM in the system, how can this affect? With -mt2 Rig1 show lower speed on some cards: GPUs power: 457.5 W
2020.10.11:19:37:26.524: main Eth speed: 152.400 MH/s, shares: 7/0/0, time: 0:02
2020.10.11:19:37:26.524: main GPUs: 1: 20.972 MH/s (1) 2: 21.215 MH/s (0) 3: 29.920 MH/s (1) 4: 29.944 MH/s (2) 5: 20.414 MH/s (2) 6: 29.934 MH/s (1)
rig2 speed don't change: GPUs power: 519.1 W
2020.10.11:19:34:58.227: main Eth speed: 157.024 MH/s, shares: 29/0/0, time: 0:10
2020.10.11:19:34:58.227: main GPUs: 1: 26.080 MH/s (8) 2: 26.170 MH/s (3) 3: 26.232 MH/s (4) 4: 26.072 MH/s (7) 5: 26.235 MH/s (2) 6: 26.235 MH/s (5)
|
|
|
|
Try to set -gt for rig 2 manually the same as on rig 1.
Maybe the problem is that on rig 2 cards with worster memory than on rig 1...
Cards from the same batch. I used the Claymore for more than a year, until it stopped working, there was no such problem and the speed was 30Mh+ After set manual -gt on rig2, speed has not changed in any way Cards the same all? It's very strange... Rig 2 take more power but speed is lower... Windows and drivers the same too? Video bioses the same on rig 2? Rig1 and Rig2 use one driver - "main OpenCL driver version: 19.12.1". Windows 10. The bios has not changed anywhere. There are differences in RAM, on Rig1 4Gb, on Rig2 8Gb. |
|
|
|
Try to set -gt for rig 2 manually the same as on rig 1.
Maybe the problem is that on rig 2 cards with worster memory than on rig 1...
Cards from the same batch. I used the Claymore for more than a year, until it stopped working, there was no such problem and the speed was 30Mh+ After set manual -gt on rig2, speed has not changed in any way |
|
|
|
Hi all, hope someone can help. I have problems with the setup, visually everything is configured the same, but the mining speed is very different -gt set auto. One rig: 2020.10.11:18:21:12.630: main Phoenix Miner 5.1c Windows/msvc - Release build 2020.10.11:18:21:12.630: main Cmd line: -pool eu1-etc.ethermine.org:4444 -wal 0x3F6dF221aC4EE397180001B62430e54dd2901be7.rig3 -tstop 85 -cclock 1150 -mclock 2050 -cvddc 900 -mvddc 900 -tt 60 -fanmin 80 -mt 1 -mode 1 2020.10.11:18:29:10.646: main *** 0:07 *** 10/11 18:29 **************************************
2020.10.11:18:29:10.647: main Eth: Mining ETC on eu1-etc.ethermine.org:4444 for 0:07
2020.10.11:18:29:10.647: main Available GPUs for mining:
2020.10.11:18:29:10.647: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.10.11:18:29:10.647: main GPU2: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.10.11:18:29:10.647: main GPU3: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.10.11:18:29:10.647: main GPU4: Radeon RX 570 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.10.11:18:29:10.647: main GPU5: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.10.11:18:29:10.647: main GPU6: Radeon RX 570 Series (pcie 7), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.10.11:18:29:10.647: main GPU1: 62C 99% 80W, GPU2: 54C 0% 80W, GPU3: 55C 79% 83W, GPU4: 55C 79% 87W, GPU5: 54C 79% 77W, GPU6: 55C 79% 83W
GPUs power: 488.5 W
2020.10.11:18:29:10.647: main Current -gt 22,23,23,22,23,23
....
2020.10.11:18:29:13.067: main GPUs: 1: 29.260 MH/s (1) 2: 29.314 MH/s (7) 3: 29.309 MH/s (2) 4: 29.311 MH/s (2) 5: 29.304 MH/s (7) 6: 29.313 MH/s (1)
Two rig: 2020.10.11:18:22:21.046: main Phoenix Miner 5.1c Windows/msvc - Release build 2020.10.11:18:22:21.046: main Cmd line: -pool eu1-etc.ethermine.org:4444 -wal 0x3F6dF221aC4EE397180001B62430e54dd2901be7.rig1 -tstop 85 -cclock 1150 -mclock 2050,2050,2050,2040,2050,2050 -cvddc 900 -mvddc 900 -tt 60 -fanmin 80 -mt 1 -mode 1 2020.10.11:18:31:01.208: main *** 0:08 *** 10/11 18:31 **************************************
2020.10.11:18:31:01.208: main Eth: Mining ETC on eu1-etc.ethermine.org:4444 for 0:08
2020.10.11:18:31:01.208: main Available GPUs for mining:
2020.10.11:18:31:01.208: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.10.11:18:31:01.208: main GPU2: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.10.11:18:31:01.208: main GPU3: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.10.11:18:31:01.208: main GPU4: Radeon RX 570 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.10.11:18:31:01.208: main GPU5: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.10.11:18:31:01.208: main GPU6: Radeon RX 570 Series (pcie 7), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.10.11:18:31:01.208: main GPU1: 54C 79% 87W, GPU2: 55C 79% 89W, GPU3: 54C 0% 84W, GPU4: 55C 79% 85W, GPU5: 54C 0% 88W, GPU6: 55C 79% 88W
GPUs power: 520.5 W
2020.10.11:18:31:01.208: main Current -gt 32,31,32,31,33,33
...
2020.10.11:18:31:04.691: main GPUs: 1: 26.324 MH/s (3) 2: 26.363 MH/s (3) 3: 26.346 MH/s (5) 4: 26.208 MH/s (3) 5: 26.367 MH/s (3) 6: 26.368 MH/s (5)
What could be the problem? |
|
|
|
hey guys and miners
when i mine ethereum classic i keep get error with openCL error - cannot allocate big buffer for DAG & not enough gpu memory to place dag.
I use 8g rx580 & rx570 and claymore v15 and windows 10
i tried -eres 0 command line and allocate more virtual memory(60gb) but not get resloved!!
what should i do if want to mine ETC??
Hey. I have the same problem. Claymore stopped with error, launched on Phoenix, only the hashrate is lower |
|
|
|
|
Согласен с xminer. Нужно было положить пул первого числа, по крайне мере у меня майнеры бы автоматически переключились, а так 3 дня пожертвований?
|
|
|
|
|
Кому-нибудь 1 декабря выплата пришла?
|
|
|
|
|
Просьба включить статистику воркеров, у меня несколько ферм и по воркерам я отслеживаю их работоспособность.
|
|
|
|
|
I send to my acc on Cryptsy.com 100 WDC, but they did not go. Status: 486 confirm, broadcast through 7 node(s)
|
|
|
|
|
2.5 LTC per 100
i will take 1500WDC
|
|
|
|
|
Buying up to 1.5k WDC at a rate of 2.6 LTC / 100
Let's make a deal!
PM me
|
|
|
|
|
Make me your offer PM. I have 10K GMC AND 680 PWC available and I'm willing to practically give their away.
|
|
|
|
|
Wefn7MefGvb5UbfLunQB7FW4WMH51XkdkM
Thanks! )
|
|
|
|
CTtQBYeK42EGJ6DdfnUqjYosnQ7PgwUzSQ Thank you  |
|
|
|
at the moment everything is sold |
|
|
|
Thanks xoper. Post your ltc address here.
LS4zvQBxinCwwBHZRf2SzdfrNTCxtsHBtz |
|
|
|
.1btc you send first
0.1BTC - 15K GMC |
|
|
|
|
