Show Posts
|
Pages: [1] 2 »
|
Hi,
I've been trying to set up StealthCoin on a new windows 10 machine for staking but it will not connect to any peers, "0 active connections(s) to the Stealthcoin network".
Stealthcoin syncs perfectly on my Mac on the same wifi network, same router. Router does not port forward anything, no special settings for any IP on the network.
I've tried it on 3 different Windows 10 machines in the same network with firewall off, no connection.
I've tried bootstrap, same result.
In the Debug log file I get:
trying to connection torurl.onion:4437 lastseen=93.0hrs ERROR: Proxy error: TTL expired
Been staking before and I remember having the same issues, don't remember the solution though.
Solved it. Moved the peers.dat from my working install on my Mac to my PC, now it's syncing and finding peers again. Weird.
|
|
|
Hi,
I've been trying to set up StealthCoin on a new windows 10 machine for staking but it will not connect to any peers, "0 active connections(s) to the Stealthcoin network".
Stealthcoin syncs perfectly on my Mac on the same wifi network, same router. Router does not port forward anything, no special settings for any IP on the network.
I've tried it on 3 different Windows 10 machines in the same network with firewall off, no connection.
I've tried bootstrap, same result.
In the Debug log file I get:
trying to connection torurl.onion:4437 lastseen=93.0hrs ERROR: Proxy error: TTL expired
Been staking before and I remember having the same issues, don't remember the solution though.
|
|
|
Have a slight issue, was receiving weekly 3% airdrops like clockwork but they ended the 23'd October.
I have registered my addy on bitcore.cc and I see it on the register list but I'm not getting airdrops anymore.
Mac, BCore 0.14.1.6-757738d
Any ideas?
Look in your address at bitcore explorer to check wether you have coins on this address Thanks for the help, as usual it's my bad not the technology ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Nice BTX rise lately, go BTX go!
|
|
|
Have a slight issue, was receiving weekly 3% airdrops like clockwork but they ended the 23'd October.
I have registered my addy on bitcore.cc and I see it on the register list but I'm not getting airdrops anymore.
Mac, BCore 0.14.1.6-757738d
Any ideas?
|
|
|
I bought some Lisk a month ago and sent it to the wallet, everything fine and no problems. Tried to open the wallet today and I can't log in, the "login" button is greyed out (disabled) no matter how many times i enter my 12-words that worked fine a month ago. https://login.lisk.io is the same thing, says "Passphrase must be a valid BIP39 mnemonic code." - I am inputing the same 12-words with spaces. Tried everything. Either I'm suddenly retarded or I'm missing something. I was thinking I have tried evereything too. Have you saved this passphrase to txt file, or you type only what you think you have remembered ? I wrote it down on a piece of paper. I always check that the password works, always, and it did. Now it does not. So don't worry, it must work. Keep calm, think what do you do wrong. Everything, caps lock, keybord format (write it down in notepad and check with paper). Well do I feel stupid, figured it out. One word written down poorly, was not even english but I thought you could bend it that way in english. So yea I was trying to log in to my wallet not using a proper english word, that's the problem. Let this be a lesson to all you future me's.
|
|
|
I bought some Lisk a month ago and sent it to the wallet, everything fine and no problems. Tried to open the wallet today and I can't log in, the "login" button is greyed out (disabled) no matter how many times i enter my 12-words that worked fine a month ago. https://login.lisk.io is the same thing, says "Passphrase must be a valid BIP39 mnemonic code." - I am inputing the same 12-words with spaces. Tried everything. Either I'm suddenly retarded or I'm missing something. I was thinking I have tried evereything too. Have you saved this passphrase to txt file, or you type only what you think you have remembered ? I wrote it down on a piece of paper. I always check that the password works, always, and it did. Now it does not.
|
|
|
I bought some Lisk a month ago and sent it to the wallet, everything fine and no problems. Tried to open the wallet today and I can't log in, the "login" button is greyed out (disabled) no matter how many times i enter my 12-words that worked fine a month ago. https://login.lisk.io is the same thing, says "Passphrase must be a valid BIP39 mnemonic code." - I am inputing the same 12-words with spaces. Tried everything. Either I'm suddenly retarded or I'm missing something.
|
|
|
Ah thanks, my mind is at ease. I was going to engage in some complicated recovery thing from a dogecoin forum. I'm just gonna watch Late Show instead ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
Thanks but it's not a password issue, it's a migration issue I guess. Posted in the NeosCoin thread but seems there are not many left, heck it's at $1.30 so someone should be online!
|
|
|
Good to see my old coin still alive! I invested back in -14 but now I cant seem to open my wallet.dat successfully and can only access 1/3 of my coins in the new Neoscoin wallet. Old wallet shows all coins but does not connect :/
Did it fork or what's up? Haven't been following...
|
|
|
Probably should just make another thread in the technical section then. And yea probably fork, smells like it. But then again I'm far from an expert, experts do magic. I need magic.
|
|
|
Hi, hope someone can help. I got some neoscoin back in 2014 and haven't bothered with it until now. I can recover some funds from the old wallet.dat, about 1/3 of them, but I want to know if it's humanly possible to recover the full amount. I've done everything in this post: http://forum.neoscoin.com/t/how-to-recover-old-noescoin-web-wallet-2-1/641 but I never get the full amount. I guess this is probably relating to some hard fork somewhere along the road, it's not like it's corrupted or anything. I can open my old wallet.dat in their old neoscoin client (neoscoin-qt-v1.2.1.1-bdb4.8-win32) and the full amount is there. But if I dumpwallet and open in the new client it shows 1/3 of the amount. The old client does not connect, probably old chain or something. Tried doing some pywallet magic as suggested in a thread I started on reddit: (C:\>pywallet.py --dumpwallet --datadir c:\ --wallet=wallet.dat --recover --recov_device=c:\wallet.dat --recov_size=416Gio --recov_outputdir=c:\) It did it's thing but same result as the neoscoin forum suggestions. So please someone tell me it's impossible so I wont have to waste my time on this anymore. Oh yea, if it's possible I'll make it worth your while.
|
|
|
Just noticed: Wallet freezes on OS X when I try to generate new address, directly after i press the button. Have to quit it, no new address generated. Also the main window is hard to bring into focus sometimes, it requires two clicks like the first one did nothing. Probably has something to do with this second tiny window(?) the wallet generates.
OS X 10.10.5 BitBay QT Version 1.2
|
|
|
Ha! your tooo toooo funny ... I gave up on GBs ... no im making my BTC some other way ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) im not angry ... I just want Waldo to be honest and I will not beat around the bush;) ... For all I know Woldo is giving himself the "JACKpot" price to HIMSELF ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Then give up on this thread, no one wants you and your bullshit here. Go make your BTC some other way. Don't come back.
|
|
|
Jesus. I think your on to something useful at this stage, Isidore of Seville is the patron saint of computer technicians. Frame that shit in the server room. And yes, I'm pro-split.
|
|
|
Good work under shitty circumstances Waldo!
|
|
|
Time for an update Waldohoover.
|
|
|
Good idea, I'll throw Vertcoins your way for this. Also I might be able to helt with graphics if that area is not saturated yet.
|
|
|
Paid for 2 shares, details in your inbox.
|
|
|
I've switched to SGminer 4.1 and I wont be going back to CGminer.
Right now I am trying out all the supplied kernels in SGminer, a 48hour test on each one. When I started mining the only thing I was looking at was hashrate but after some reading I realised it's WU that's the most important factor here (Work Utility). Some kernels gives much better results that others but right now I only have 48h results for two of them:
zuikkis @ 1065 Mhz GPU 0: 722kh/WU:649 (89.8%) GPU 1: 722kh/WU:647 (89.6%) GPU 2: 701kh/WU:644 (91.8%)
psw @ 1065 Mhz GPU 0: 728kh/WU:665 (91.3%) GPU 1: 724kh/WU:675 (93.2%) GPU 2: 714kh/WU:665 (93.1%)
The WU should be 90% of the hashrate or higher. More results in a few days.
|
|
|
|