Bitcoin Forum
October 01, 2025, 11:47:22 AM *
News: Latest Bitcoin Core release: 29.0 [Torrent]
 
  Home Help Search Login Register More  
  Show Posts
Pages: [1] 2 3
1  Bitcoin / Mining support / Re: Some Error in Kernel Log Regarding PIC on: December 13, 2019, 05:04:04 PM
Somehow problem is solved by just cleaning the board, no idea why dusty board give that error.
2  Bitcoin / Mining support / Re: Antminer S9 - 63 Asic but does not hash also Temp fixed at 15 on: December 12, 2019, 11:32:24 AM
Alright sorry then. I can call this one is fixed since LPM has worked and will use Braiins OS as BitMaxz suggested.
3  Bitcoin / Mining support / Some Error in Kernel Log Regarding PIC on: December 12, 2019, 11:30:39 AM
The error part of the log is like that ;

Code:
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=a0(3) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=a0(3) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=a0(3) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=a0(3) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=80(3) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=80(3) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=80(3) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=80(3) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=e8(3) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=e8(3) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=e8(3) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=e8(3) on Chain[7]
main.c:8961: chain[7]: [3:3] [3:3] [3:3] [3:3] [3:3] [3:3] [3:3] [3:3]
main.c:9148: chain[7] has no freq in PIC! Will use default freq=500 and jump over...
main.c:2282: Check chain[7] PIC fw version=0x03

But I dont know if that is also a problem that requires PIC flash with Pickit tool? I remember once I was getting a PIC error in a device(might be even that) and it was gone the next day I reflashed the firmware and left the device powered off until the next day. It was finding 0 ASIC with PIC error and after there is no PIC error, It found 63 asics and worked. This one also shows 0 ASIC but I think its coz of that PIC error.
4  Bitcoin / Mining support / Re: Antminer S9 - 63 Asic but does not hash also Temp fixed at 15 on: December 11, 2019, 01:02:47 PM
No its not the middle board, its the last one you know what I mean. I will lower it gradually, I thought same about that. Its not a bad solution 3,5 is still great. I also have another with PIC error in kernel, will try pickit 3 but no idea how^^. Guides on the internet are not so clear.
5  Bitcoin / Mining support / Re: Antminer S9 - 63 Asic but does not hash also Temp fixed at 15 on: December 10, 2019, 09:50:16 PM
I will check them if they are free. Maybe per board also work for me.

Edit. They both have Dev fee but I can still just test one to see if I can do what I think. They dont have a guide to run the firmware from SD card since the latest Bitmain fw wont allow us to downgrade or change the fw with interface.
6  Bitcoin / Mining support / Re: Antminer S9 - 63 Asic but does not hash also Temp fixed at 15 on: December 10, 2019, 12:30:28 PM
Tomorrow I will make a cleaning for the deviceboards and follow what you suggested. I will let you know the results.
ANOTHER UPDATE
THe 3rd board is hashing with lower power mode but this way it still hashes 9Th total due to LPM. Does it happen because the board is about to die? One chip fails to hash with high frequency?

Does braiins OS have option to adjust frequency of EACH chips?
7  Bitcoin / Mining support / Re: Antminer S9 - 63 Asic but does not hash also Temp fixed at 15 on: December 09, 2019, 12:12:56 PM
As I notice temp reads are being done on 62 chip(which could be the last chip aswell) so if temp read fails, can we say its most probably the last chip might cause that?
8  Bitcoin / Mining support / Re: Antminer S9 - 63 Asic but does not hash also Temp fixed at 15 on: December 05, 2019, 10:24:45 AM
Low power mode did not help. I can try Braiins OS but does it happen because of temp reading failing?
9  Bitcoin / Mining support / Antminer S9 - 63 Asic but does not hash also Temp fixed at 15 on: December 04, 2019, 11:41:45 AM
The other 2 boards are working just fine but this one shows 63 asic yet does not hash. Any idea why it might be? Anyone experienced that?
Here is full kernel

Code:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 27800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 258048
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map e6fd8000
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000]   HighMem zone: 496 pages used for memmap
[    0.000000]   HighMem zone: 63488 pages, LIFO batch:15
[    0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256528
[    0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 884108K/1032192K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 148084K reserved, 253952K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to f0004000
[    0.000000] zynq_clock_init: clkc starts at f0004100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000291] ps7-ttc #0 at f0006000, irq=43
[    0.000595] Console: colour dummy device 80x30
[    0.000631] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.090242] pid_max: default: 32768 minimum: 301
[    0.090456] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.090476] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.092664] CPU: Testing write buffer coherency: ok
[    0.092999] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.093059] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.093280] L310 cache controller enabled
[    0.093300] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.170985] CPU1: Booted secondary processor
[    0.260218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.260347] Brought up 2 CPUs
[    0.260365] SMP: Total of 2 processors activated.
[    0.260374] CPU: All CPU(s) started in SVC mode.
[    0.261036] devtmpfs: initialized
[    0.263465] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.264662] regulator-dummy: no parameters
[    0.272068] NET: Registered protocol family 16
[    0.274254] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.276519] cpuidle: using governor ladder
[    0.276532] cpuidle: using governor menu
[    0.283891] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.285398] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.285411] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.285522] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[    0.307003] bio: create slab <bio-0> at 0
[    0.308383] vgaarb: loaded
[    0.309071] SCSI subsystem initialized
[    0.309949] usbcore: registered new interface driver usbfs
[    0.310127] usbcore: registered new interface driver hub
[    0.310675] usbcore: registered new device driver usb
[    0.312106] media: Linux media interface: v0.10
[    0.312268] Linux video capture interface: v2.00
[    0.312516] pps_core: LinuxPPS API ver. 1 registered
[    0.312528] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.312649] PTP clock support registered
[    0.313000] EDAC MC: Ver: 3.0.0
[    0.314203] Advanced Linux Sound Architecture Driver Initialized.
[    0.316932] DMA-API: preallocated 4096 debug entries
[    0.316946] DMA-API: debugging enabled by kernel config
[    0.317019] Switched to clocksource arm_global_timer
[    0.336541] NET: Registered protocol family 2
[    0.337277] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.337372] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.337531] TCP: Hash tables configured (established 8192 bind 8192)
[    0.337591] TCP: reno registered
[    0.337610] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.337662] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.337921] NET: Registered protocol family 1
[    0.338277] RPC: Registered named UNIX socket transport module.
[    0.338289] RPC: Registered udp transport module.
[    0.338298] RPC: Registered tcp transport module.
[    0.338306] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.338318] PCI: CLS 0 bytes, default 64
[    0.338759] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.340767] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.342084] bounce pool size: 64 pages
[    0.342953] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.343151] msgmni has been set to 1486
[    0.343920] io scheduler noop registered
[    0.343933] io scheduler deadline registered
[    0.343979] io scheduler cfq registered (default)
[    0.353731] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.353751] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.477458] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.049505] console [ttyPS0] enabled
[    1.053779] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[    1.061402] [drm] Initialized drm 1.1.0 20060810
[    1.078372] brd: module loaded
[    1.087766] loop: module loaded
[    1.097222] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.102974] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.110952] libphy: XEMACPS mii bus: probed
[    1.115318] ------------- phy_id = 0x3625e62
[    1.120355] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.129172] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.135786] ehci-pci: EHCI PCI platform driver
[    1.143023] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.149854] usbcore: registered new interface driver usb-storage
[    1.156694] mousedev: PS/2 mouse device common for all mice
[    1.162809] i2c /dev entries driver
[    1.169783] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.175263] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.181182] Xilinx Zynq CpuIdle Driver started
[    1.186023] sdhci: Secure Digital Host Controller Interface driver
[    1.192256] sdhci: Copyright(c) Pierre Ossman
[    1.196527] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.203353] mmc0: no vqmmc regulator found
[    1.207392] mmc0: no vmmc regulator found
[    1.247062] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.255745] usbcore: registered new interface driver usbhid
[    1.261257] usbhid: USB HID core driver
[    1.265971] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.272274] nand: Micron MT29F2G08ABAEAWP
[    1.276239] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.282193] Bad block table found at page 131008, version 0x01
[    1.288416] Bad block table found at page 130944, version 0x01
[    1.294469] 3 ofpart partitions found on MTD device pl353-nand
[    1.300258] Creating 3 MTD partitions on "pl353-nand":
[    1.305346] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.313400] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.320716] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.331443] TCP: cubic registered
[    1.334681] NET: Registered protocol family 17
[    1.339390] Registering SWP/SWPB emulation handler
[    1.345285] regulator-dummy: disabling
[    1.349626] UBI: attaching mtd1 to ubi0
[    1.876202] UBI: scanning is finished
[    1.887833] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.894888] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.901677] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.908360] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.915198] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.921208] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.928319] UBI: max/mean erase counter: 65/32, WL threshold: 4096, image sequence number: 267830735
[    1.937436] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.946633] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.946638] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.950626] ALSA device list:
[    1.950630]   No soundcards found.
[    1.966943] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    2.029818] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.035745] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.044887] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.054765] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.059803] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 68024B66-D002-4EAC-85B6-9A9AE3C1123E, small LPT model
[    2.071091] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.078064] devtmpfs: mounted
[    2.081170] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    2.938420] random: dd urandom read with 1 bits of entropy available
[    3.347056] 
[    3.347056] bcm54xx_config_init
[    4.457066] 
[    4.457066] bcm54xx_config_init
[    7.457899] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    7.463990] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   21.769153] In axi fpga driver!
[   21.772222] request_mem_region OK!
[   21.775617] AXI fpga dev virtual address is 0xf0200000
[   21.780754] *base_vir_addr = 0xc51e
[   21.795601] In fpga mem driver!
[   21.798936] request_mem_region OK!
[   21.802447] fpga mem virtual address is 0xf3000000
[   22.596430] 
[   22.596430] bcm54xx_config_init
[   23.676321] 
[   23.676321] bcm54xx_config_init
[   26.676891] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   26.682905] xemacps e000b000.ps7-ethernet: link up (100/FULL)
log_level = 4
This is XILINX board. Totalram:       1039753216
Detect 1GB control board of XILINX
mmap axi_fpga_addr = 0xb6fc7000
axi_fpga_addr data = 0xc51e
mmap fpga_mem_addr = 0xb5dc0000
forceFreq=-1 forceFlag=0
min work minertest[0]:912


DETECT HW version=0000c51e
miner ID : 801c0c012c00885c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
read pic freq and badcore num...
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[4] has core num=3
Check chain[5] PIC fw version=0x03
read pic freq and badcore num...
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[1] has core num=4
Chain[6] ASIC[3] has core num=15
Chain[6] ASIC[4] has core num=1
Chain[6] ASIC[15] has core num=2
Chain[6] ASIC[22] has core num=15
Chain[6] ASIC[57] has core num=1
Check chain[6] PIC fw version=0x03
read pic freq and badcore num...
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[17] has core num=1
Chain[7] ASIC[22] has core num=1
Chain[7] ASIC[45] has core num=15
Chain[7] ASIC[50] has core num=15
Chain[7] ASIC[54] has core num=2
Chain[7] ASIC[60] has core num=2
Chain[7] ASIC[62] has core num=2
Check chain[7] PIC fw version=0x03
get PIC voltage=74 on chain[5], value=900
get PIC voltage=74 on chain[6], value=900
get PIC voltage=74 on chain[7], value=900
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
total_exist_chain_num = 3
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 3, total chain num = 3 
single_board_frq_tuning enter
min_rate, des_rate, fix_volt:13800, 14000, 880
force_freq not set, don't need tuning
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1805 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = S9
Miner compile time: Fri May 31 10:59:27 CST 2019 type: Antminer S9
miner ID : 801c0c012c00885c
Checking fans...
get fan[4] speed=6120
get fan[4] speed=6120
get fan[5] speed=4200
get fan[4] speed=6120
get fan[5] speed=4200
get fan[4] speed=6120
get fan[5] speed=4200
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x00 0x47 0x00 0x47 0x04 0x47 0x07 0x47 0x00 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x01 0x47 0x01 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x05 0x47 0x09 0x47 0x23 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=890
No scan based on domain
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x00 0x4a 0x00 0x4a 0x04 0x4a 0x0a 0x4a 0x00 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x01 0x4a 0x01 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x05 0x4a 0x09 0x4a 0x23 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=890
No scan based on domain
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x00 0x4a 0x00 0x4a 0x04 0x4a 0x0a 0x4a 0x00 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x01 0x4a 0x01 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x05 0x4a 0x09 0x4a 0x23 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=890
No scan based on domain
Check chain[7] PIC fw version=0x03
total_exist_chain_num = 3
Chain[J6] original vol value=890 adjusted vol value:890
Chain[J6] orignal chain_voltage_pic=74 value=900
Chain[J6] original chain_voltage_value=890 adjusted chain_voltage_value:890, value=900
Chain[J6] will use backup chain_voltage_pic=890 [91]
Chain[J6] get working chain_voltage_pic=91
Chain[J6] Aisc[00] original freq=631 adjusted freq:681
Chain[J6] Aisc[01] original freq=631 adjusted freq:681
Chain[J6] Aisc[02] original freq=631 adjusted freq:681
Chain[J6] Aisc[03] original freq=631 adjusted freq:681
Chain[J6] Aisc[04] original freq=631 adjusted freq:681
Chain[J6] Aisc[05] original freq=631 adjusted freq:681
Chain[J6] Aisc[06] original freq=631 adjusted freq:681
Chain[J6] Aisc[07] original freq=631 adjusted freq:681
Chain[J6] Aisc[08] original freq=631 adjusted freq:681
Chain[J6] Aisc[09] original freq=631 adjusted freq:681
Chain[J6] Aisc[10] original freq=631 adjusted freq:681
Chain[J6] Aisc[11] original freq=631 adjusted freq:681
Chain[J6] Aisc[12] original freq=631 adjusted freq:681
Chain[J6] Aisc[13] original freq=631 adjusted freq:681
Chain[J6] Aisc[14] original freq=631 adjusted freq:681
Chain[J6] Aisc[15] original freq=631 adjusted freq:681
Chain[J6] Aisc[16] original freq=631 adjusted freq:681
Chain[J6] Aisc[17] original freq=631 adjusted freq:681
Chain[J6] Aisc[18] original freq=631 adjusted freq:681
Chain[J6] Aisc[19] original freq=631 adjusted freq:681
Chain[J6] Aisc[20] original freq=631 adjusted freq:681
Chain[J6] Aisc[21] original freq=631 adjusted freq:681
Chain[J6] Aisc[22] original freq=631 adjusted freq:681
Chain[J6] Aisc[23] original freq=631 adjusted freq:681
Chain[J6] Aisc[24] original freq=631 adjusted freq:681
Chain[J6] Aisc[25] original freq=631 adjusted freq:681
Chain[J6] Aisc[26] original freq=631 adjusted freq:681
Chain[J6] Aisc[27] original freq=631 adjusted freq:681
Chain[J6] Aisc[28] original freq=631 adjusted freq:681
Chain[J6] Aisc[29] original freq=631 adjusted freq:681
Chain[J6] Aisc[30] original freq=631 adjusted freq:681
Chain[J6] Aisc[31] original freq=631 adjusted freq:681
Chain[J6] Aisc[32] original freq=631 adjusted freq:681
Chain[J6] Aisc[33] original freq=631 adjusted freq:681
Chain[J6] Aisc[34] original freq=631 adjusted freq:681
Chain[J6] Aisc[35] original freq=631 adjusted freq:681
Chain[J6] Aisc[36] original freq=631 adjusted freq:681
Chain[J6] Aisc[37] original freq=631 adjusted freq:681
Chain[J6] Aisc[38] original freq=631 adjusted freq:681
Chain[J6] Aisc[39] original freq=631 adjusted freq:681
Chain[J6] Aisc[40] original freq=631 adjusted freq:681
Chain[J6] Aisc[41] original freq=631 adjusted freq:681
Chain[J6] Aisc[42] original freq=631 adjusted freq:681
Chain[J6] Aisc[43] original freq=631 adjusted freq:681
Chain[J6] Aisc[44] original freq=631 adjusted freq:681
Chain[J6] Aisc[45] original freq=631 adjusted freq:681
Chain[J6] Aisc[46] original freq=631 adjusted freq:681
Chain[J6] Aisc[47] original freq=631 adjusted freq:681
Chain[J6] Aisc[48] original freq=631 adjusted freq:681
Chain[J6] Aisc[49] original freq=631 adjusted freq:681
Chain[J6] Aisc[50] original freq=631 adjusted freq:681
Chain[J6] Aisc[51] original freq=631 adjusted freq:681
Chain[J6] Aisc[52] original freq=631 adjusted freq:681
Chain[J6] Aisc[53] original freq=631 adjusted freq:681
Chain[J6] Aisc[54] original freq=631 adjusted freq:681
Chain[J6] Aisc[55] original freq=631 adjusted freq:681
Chain[J6] Aisc[56] original freq=631 adjusted freq:681
Chain[J6] Aisc[57] original freq=631 adjusted freq:681
Chain[J6] Aisc[58] original freq=631 adjusted freq:681
Chain[J6] Aisc[59] original freq=631 adjusted freq:681
Chain[J6] Aisc[60] original freq=631 adjusted freq:681
Chain[J6] Aisc[61] original freq=631 adjusted freq:681
Chain[J6] Aisc[62] original freq=631 adjusted freq:681
Chain[J7] original vol value=890 adjusted vol value:890
Chain[J7] orignal chain_voltage_pic=74 value=900
Chain[J7] original chain_voltage_value=890 adjusted chain_voltage_value:890, value=900
Chain[J7] will use backup chain_voltage_pic=890 [91]
Chain[J7] get working chain_voltage_pic=91
Chain[J7] Aisc[00] original freq=650 adjusted freq:700
Chain[J7] Aisc[01] original freq=650 adjusted freq:700
Chain[J7] Aisc[02] original freq=650 adjusted freq:700
Chain[J7] Aisc[03] original freq=650 adjusted freq:700
Chain[J7] Aisc[04] original freq=650 adjusted freq:700
Chain[J7] Aisc[05] original freq=650 adjusted freq:700
Chain[J7] Aisc[06] original freq=650 adjusted freq:700
Chain[J7] Aisc[07] original freq=650 adjusted freq:700
Chain[J7] Aisc[08] original freq=650 adjusted freq:700
Chain[J7] Aisc[09] original freq=650 adjusted freq:700
Chain[J7] Aisc[10] original freq=650 adjusted freq:700
Chain[J7] Aisc[11] original freq=650 adjusted freq:700
Chain[J7] Aisc[12] original freq=650 adjusted freq:700
Chain[J7] Aisc[13] original freq=650 adjusted freq:700
Chain[J7] Aisc[14] original freq=650 adjusted freq:700
Chain[J7] Aisc[15] original freq=650 adjusted freq:700
Chain[J7] Aisc[16] original freq=650 adjusted freq:700
Chain[J7] Aisc[17] original freq=650 adjusted freq:700
Chain[J7] Aisc[18] original freq=650 adjusted freq:700
Chain[J7] Aisc[19] original freq=650 adjusted freq:700
Chain[J7] Aisc[20] original freq=650 adjusted freq:700
Chain[J7] Aisc[21] original freq=650 adjusted freq:700
Chain[J7] Aisc[22] original freq=650 adjusted freq:700
Chain[J7] Aisc[23] original freq=650 adjusted freq:700
Chain[J7] Aisc[24] original freq=650 adjusted freq:700
Chain[J7] Aisc[25] original freq=650 adjusted freq:700
Chain[J7] Aisc[26] original freq=650 adjusted freq:700
Chain[J7] Aisc[27] original freq=650 adjusted freq:700
Chain[J7] Aisc[28] original freq=650 adjusted freq:700
Chain[J7] Aisc[29] original freq=650 adjusted freq:700
Chain[J7] Aisc[30] original freq=650 adjusted freq:700
Chain[J7] Aisc[31] original freq=650 adjusted freq:700
Chain[J7] Aisc[32] original freq=650 adjusted freq:700
Chain[J7] Aisc[33] original freq=650 adjusted freq:700
Chain[J7] Aisc[34] original freq=650 adjusted freq:700
Chain[J7] Aisc[35] original freq=650 adjusted freq:700
Chain[J7] Aisc[36] original freq=650 adjusted freq:700
Chain[J7] Aisc[37] original freq=650 adjusted freq:700
Chain[J7] Aisc[38] original freq=650 adjusted freq:700
Chain[J7] Aisc[39] original freq=650 adjusted freq:700
Chain[J7] Aisc[40] original freq=650 adjusted freq:700
Chain[J7] Aisc[41] original freq=650 adjusted freq:700
Chain[J7] Aisc[42] original freq=650 adjusted freq:700
Chain[J7] Aisc[43] original freq=650 adjusted freq:700
Chain[J7] Aisc[44] original freq=650 adjusted freq:700
Chain[J7] Aisc[45] original freq=650 adjusted freq:700
Chain[J7] Aisc[46] original freq=650 adjusted freq:700
Chain[J7] Aisc[47] original freq=650 adjusted freq:700
Chain[J7] Aisc[48] original freq=650 adjusted freq:700
Chain[J7] Aisc[49] original freq=650 adjusted freq:700
Chain[J7] Aisc[50] original freq=650 adjusted freq:700
Chain[J7] Aisc[51] original freq=650 adjusted freq:700
Chain[J7] Aisc[52] original freq=650 adjusted freq:700
Chain[J7] Aisc[53] original freq=650 adjusted freq:700
Chain[J7] Aisc[54] original freq=650 adjusted freq:700
Chain[J7] Aisc[55] original freq=650 adjusted freq:700
Chain[J7] Aisc[56] original freq=650 adjusted freq:700
Chain[J7] Aisc[57] original freq=650 adjusted freq:700
Chain[J7] Aisc[58] original freq=650 adjusted freq:700
Chain[J7] Aisc[59] original freq=650 adjusted freq:700
Chain[J7] Aisc[60] original freq=650 adjusted freq:700
Chain[J7] Aisc[61] original freq=650 adjusted freq:700
Chain[J7] Aisc[62] original freq=650 adjusted freq:700
Chain[J8] original vol value=890 adjusted vol value:890
Chain[J8] orignal chain_voltage_pic=74 value=900
Chain[J8] original chain_voltage_value=890 adjusted chain_voltage_value:890, value=900
Chain[J8] will use backup chain_voltage_pic=890 [91]
Chain[J8] get working chain_voltage_pic=91
Chain[J8] Aisc[00] original freq=650 adjusted freq:700
Chain[J8] Aisc[01] original freq=650 adjusted freq:700
Chain[J8] Aisc[02] original freq=650 adjusted freq:700
Chain[J8] Aisc[03] original freq=650 adjusted freq:700
Chain[J8] Aisc[04] original freq=650 adjusted freq:700
Chain[J8] Aisc[05] original freq=650 adjusted freq:700
Chain[J8] Aisc[06] original freq=650 adjusted freq:700
Chain[J8] Aisc[07] original freq=650 adjusted freq:700
Chain[J8] Aisc[08] original freq=650 adjusted freq:700
Chain[J8] Aisc[09] original freq=650 adjusted freq:700
Chain[J8] Aisc[10] original freq=650 adjusted freq:700
Chain[J8] Aisc[11] original freq=650 adjusted freq:700
Chain[J8] Aisc[12] original freq=650 adjusted freq:700
Chain[J8] Aisc[13] original freq=650 adjusted freq:700
Chain[J8] Aisc[14] original freq=650 adjusted freq:700
Chain[J8] Aisc[15] original freq=650 adjusted freq:700
Chain[J8] Aisc[16] original freq=650 adjusted freq:700
Chain[J8] Aisc[17] original freq=650 adjusted freq:700
Chain[J8] Aisc[18] original freq=650 adjusted freq:700
Chain[J8] Aisc[19] original freq=650 adjusted freq:700
Chain[J8] Aisc[20] original freq=650 adjusted freq:700
Chain[J8] Aisc[21] original freq=650 adjusted freq:700
Chain[J8] Aisc[22] original freq=650 adjusted freq:700
Chain[J8] Aisc[23] original freq=650 adjusted freq:700
Chain[J8] Aisc[24] original freq=650 adjusted freq:700
Chain[J8] Aisc[25] original freq=650 adjusted freq:700
Chain[J8] Aisc[26] original freq=650 adjusted freq:700
Chain[J8] Aisc[27] original freq=650 adjusted freq:700
Chain[J8] Aisc[28] original freq=650 adjusted freq:700
Chain[J8] Aisc[29] original freq=650 adjusted freq:700
Chain[J8] Aisc[30] original freq=650 adjusted freq:700
Chain[J8] Aisc[31] original freq=650 adjusted freq:700
Chain[J8] Aisc[32] original freq=650 adjusted freq:700
Chain[J8] Aisc[33] original freq=650 adjusted freq:700
Chain[J8] Aisc[34] original freq=650 adjusted freq:700
Chain[J8] Aisc[35] original freq=650 adjusted freq:700
Chain[J8] Aisc[36] original freq=650 adjusted freq:700
Chain[J8] Aisc[37] original freq=650 adjusted freq:700
Chain[J8] Aisc[38] original freq=650 adjusted freq:700
Chain[J8] Aisc[39] original freq=650 adjusted freq:700
Chain[J8] Aisc[40] original freq=650 adjusted freq:700
Chain[J8] Aisc[41] original freq=650 adjusted freq:700
Chain[J8] Aisc[42] original freq=650 adjusted freq:700
Chain[J8] Aisc[43] original freq=650 adjusted freq:700
Chain[J8] Aisc[44] original freq=650 adjusted freq:700
Chain[J8] Aisc[45] original freq=650 adjusted freq:700
Chain[J8] Aisc[46] original freq=650 adjusted freq:700
Chain[J8] Aisc[47] original freq=650 adjusted freq:700
Chain[J8] Aisc[48] original freq=650 adjusted freq:700
Chain[J8] Aisc[49] original freq=650 adjusted freq:700
Chain[J8] Aisc[50] original freq=650 adjusted freq:700
Chain[J8] Aisc[51] original freq=650 adjusted freq:700
Chain[J8] Aisc[52] original freq=650 adjusted freq:700
Chain[J8] Aisc[53] original freq=650 adjusted freq:700
Chain[J8] Aisc[54] original freq=650 adjusted freq:700
Chain[J8] Aisc[55] original freq=650 adjusted freq:700
Chain[J8] Aisc[56] original freq=650 adjusted freq:700
Chain[J8] Aisc[57] original freq=650 adjusted freq:700
Chain[J8] Aisc[58] original freq=650 adjusted freq:700
Chain[J8] Aisc[59] original freq=650 adjusted freq:700
Chain[J8] Aisc[60] original freq=650 adjusted freq:700
Chain[J8] Aisc[61] original freq=650 adjusted freq:700
Chain[J8] Aisc[62] original freq=650 adjusted freq:700
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[4] has core num=3
Chain[J7] has core num in PIC
Chain[J7] ASIC[1] has core num=4
Chain[J7] ASIC[3] has core num=15
Chain[J7] ASIC[4] has core num=1
Chain[J7] ASIC[15] has core num=2
Chain[J7] ASIC[22] has core num=15
Chain[J7] ASIC[57] has core num=1
Chain[J8] has core num in PIC
Chain[J8] ASIC[17] has core num=1
Chain[J8] ASIC[22] has core num=1
Chain[J8] ASIC[45] has core num=15
Chain[J8] ASIC[50] has core num=15
Chain[J8] ASIC[54] has core num=2
Chain[J8] ASIC[60] has core num=2
Chain[J8] ASIC[62] has core num=2
miner total rate=14613GH/s ideal_total_hash_rate = 14500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=631
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681 
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681 
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681 
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681 
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:681 Asic[36]:681 Asic[37]:681 Asic[38]:681 Asic[39]:681 
Asic[40]:681 Asic[41]:681 Asic[42]:681 Asic[43]:681 Asic[44]:681 Asic[45]:681 Asic[46]:681 Asic[47]:681 
Asic[48]:681 Asic[49]:681 Asic[50]:681 Asic[51]:681 Asic[52]:681 Asic[53]:681 Asic[54]:681 Asic[55]:681 
Asic[56]:681 Asic[57]:681 Asic[58]:681 Asic[59]:681 Asic[60]:681 Asic[61]:681 Asic[62]:681 
Chain:5 max freq=681
Chain:5 min freq=681

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=650
Asic[ 0]:700 Asic[ 1]:700 Asic[ 2]:700 Asic[ 3]:700 Asic[ 4]:700 Asic[ 5]:700 Asic[ 6]:700 Asic[ 7]:700 
Asic[ 8]:700 Asic[ 9]:700 Asic[10]:700 Asic[11]:700 Asic[12]:700 Asic[13]:700 Asic[14]:700 Asic[15]:700 
Asic[16]:700 Asic[17]:700 Asic[18]:700 Asic[19]:700 Asic[20]:700 Asic[21]:700 Asic[22]:700 Asic[23]:700 
Asic[24]:700 Asic[25]:700 Asic[26]:700 Asic[27]:700 Asic[28]:700 Asic[29]:700 Asic[30]:700 Asic[31]:700 
Asic[32]:700 Asic[33]:700 Asic[34]:700 Asic[35]:700 Asic[36]:700 Asic[37]:700 Asic[38]:700 Asic[39]:700 
Asic[40]:700 Asic[41]:700 Asic[42]:700 Asic[43]:700 Asic[44]:700 Asic[45]:700 Asic[46]:700 Asic[47]:700 
Asic[48]:700 Asic[49]:700 Asic[50]:700 Asic[51]:700 Asic[52]:700 Asic[53]:700 Asic[54]:700 Asic[55]:700 
Asic[56]:700 Asic[57]:700 Asic[58]:700 Asic[59]:700 Asic[60]:700 Asic[61]:700 Asic[62]:700 
Chain:6 max freq=700
Chain:6 min freq=700

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=650
Asic[ 0]:700 Asic[ 1]:700 Asic[ 2]:700 Asic[ 3]:700 Asic[ 4]:700 Asic[ 5]:700 Asic[ 6]:700 Asic[ 7]:700 
Asic[ 8]:700 Asic[ 9]:700 Asic[10]:700 Asic[11]:700 Asic[12]:700 Asic[13]:700 Asic[14]:700 Asic[15]:700 
Asic[16]:700 Asic[17]:700 Asic[18]:700 Asic[19]:700 Asic[20]:700 Asic[21]:700 Asic[22]:700 Asic[23]:700 
Asic[24]:700 Asic[25]:700 Asic[26]:700 Asic[27]:700 Asic[28]:700 Asic[29]:700 Asic[30]:700 Asic[31]:700 
Asic[32]:700 Asic[33]:700 Asic[34]:700 Asic[35]:700 Asic[36]:700 Asic[37]:700 Asic[38]:700 Asic[39]:700 
Asic[40]:700 Asic[41]:700 Asic[42]:700 Asic[43]:700 Asic[44]:700 Asic[45]:700 Asic[46]:700 Asic[47]:700 
Asic[48]:700 Asic[49]:700 Asic[50]:700 Asic[51]:700 Asic[52]:700 Asic[53]:700 Asic[54]:700 Asic[55]:700 
Asic[56]:700 Asic[57]:700 Asic[58]:700 Asic[59]:700 Asic[60]:700 Asic[61]:700 Asic[62]:700 
Chain:7 max freq=700
Chain:7 min freq=700


Miner fix freq ...
totalRate = 14613, fixed_totalRate = 14645
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=631
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681 
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681 
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681 
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681 
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:681 Asic[36]:681 Asic[37]:681 Asic[38]:681 Asic[39]:681 
Asic[40]:681 Asic[41]:681 Asic[42]:681 Asic[43]:681 Asic[44]:681 Asic[45]:681 Asic[46]:681 Asic[47]:681 
Asic[48]:681 Asic[49]:681 Asic[50]:681 Asic[51]:681 Asic[52]:681 Asic[53]:681 Asic[54]:681 Asic[55]:681 
Asic[56]:681 Asic[57]:681 Asic[58]:681 Asic[59]:681 Asic[60]:681 Asic[61]:681 Asic[62]:681 
Chain:5 max freq=681
Chain:5 min freq=681

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=650
Asic[ 0]:700 Asic[ 1]:700 Asic[ 2]:700 Asic[ 3]:700 Asic[ 4]:700 Asic[ 5]:700 Asic[ 6]:700 Asic[ 7]:700 
Asic[ 8]:700 Asic[ 9]:700 Asic[10]:700 Asic[11]:700 Asic[12]:700 Asic[13]:700 Asic[14]:700 Asic[15]:700 
Asic[16]:700 Asic[17]:700 Asic[18]:700 Asic[19]:700 Asic[20]:700 Asic[21]:700 Asic[22]:700 Asic[23]:700 
Asic[24]:700 Asic[25]:700 Asic[26]:700 Asic[27]:700 Asic[28]:700 Asic[29]:700 Asic[30]:700 Asic[31]:700 
Asic[32]:700 Asic[33]:700 Asic[34]:700 Asic[35]:700 Asic[36]:700 Asic[37]:700 Asic[38]:700 Asic[39]:700 
Asic[40]:700 Asic[41]:700 Asic[42]:700 Asic[43]:700 Asic[44]:700 Asic[45]:700 Asic[46]:700 Asic[47]:700 
Asic[48]:700 Asic[49]:700 Asic[50]:700 Asic[51]:700 Asic[52]:700 Asic[53]:700 Asic[54]:700 Asic[55]:700 
Asic[56]:700 Asic[57]:700 Asic[58]:700 Asic[59]:700 Asic[60]:700 Asic[61]:700 Asic[62]:700 
Chain:6 max freq=700
Chain:6 min freq=700

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=650
Asic[ 0]:700 Asic[ 1]:700 Asic[ 2]:700 Asic[ 3]:700 Asic[ 4]:700 Asic[ 5]:700 Asic[ 6]:700 Asic[ 7]:700 
Asic[ 8]:700 Asic[ 9]:700 Asic[10]:700 Asic[11]:700 Asic[12]:700 Asic[13]:700 Asic[14]:700 Asic[15]:700 
Asic[16]:700 Asic[17]:700 Asic[18]:700 Asic[19]:700 Asic[20]:700 Asic[21]:700 Asic[22]:700 Asic[23]:700 
Asic[24]:700 Asic[25]:700 Asic[26]:700 Asic[27]:700 Asic[28]:700 Asic[29]:700 Asic[30]:700 Asic[31]:700 
Asic[32]:700 Asic[33]:700 Asic[34]:700 Asic[35]:700 Asic[36]:700 Asic[37]:700 Asic[38]:700 Asic[39]:700 
Asic[40]:700 Asic[41]:700 Asic[42]:700 Asic[43]:700 Asic[44]:700 Asic[45]:700 Asic[46]:700 Asic[47]:700 
Asic[48]:700 Asic[49]:700 Asic[50]:700 Asic[51]:700 Asic[52]:700 Asic[53]:700 Asic[54]:700 Asic[55]:700 
Asic[56]:700 Asic[57]:700 Asic[58]:700 Asic[59]:700 Asic[60]:700 Asic[61]:700 Asic[62]:700 
Chain:7 max freq=700
Chain:7 min freq=700

max freq = 700
totalRate = 14613, fixed_totalRate = 14500
set baud=1
Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:17 remote:20 offset:26 
Chain[J6] chip[244] get middle temp offset=26 typeID=55
Chain[J7] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:15 remote:16 offset:28 
Chain[J7] chip[244] get middle temp offset=28 typeID=55
Chain[J8] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[8] temp chip I2C addr=0x98
chain[8] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[8] chip[244] local:14 remote:16 offset:27 
Chain[J8] chip[244] get middle temp offset=27 typeID=55
single board rate=4888 voltage limit=940 on chain[5]
get PIC voltage=890 on chain[5], check: must be < 940
single board rate=4862 voltage limit=940 on chain[6]
get PIC voltage=890 on chain[6], check: must be < 940
single board rate=4862 voltage limit=940 on chain[7]
get PIC voltage=890 on chain[7], check: must be < 940
setting to working voltage...
chain[5] set voltage to 930
chain[6] set voltage to 930
chain[7] set voltage to 930
chain[5] set voltage to 920
chain[6] set voltage to 920
chain[7] set voltage to 920
chain[5] set voltage to 910
chain[6] set voltage to 910
chain[7] set voltage to 910
chain[5] set voltage to 900
chain[6] set voltage to 900
chain[7] set voltage to 900
chain[5] set voltage to 890
chain[6] set voltage to 890
chain[7] set voltage to 890
start thread for read temp
setStartTimePoint total_tv_start_sys=138 total_tv_end_sys=139
restartNum = 2 , auto-reinit enabled...
mining.subscribe:{"id": 0, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9/13500"]}
bring_up_pcb_temp = 35
avg hash rate = 10231.816512, ideal hash rate = 14500
hash rate is low...
do read_temp_func once...

get RT hashrate from Chain[5]: (asic index start from 1-63)

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=81.4860 Asic[02]=74.1210 Asic[03]=75.7150 Asic[04]=5.08300 Asic[05]=75.1450 Asic[06]=77.6780 Asic[07]=76.4200 Asic[08]=82.2080 
Asic[09]=80.4800 Asic[10]=79.5570 Asic[11]=82.9800 Asic[12]=87.2070 Asic[13]=76.8730 Asic[14]=82.0070 Asic[15]=84.0870 Asic[16]=76.2350 
Asic[17]=78.6680 Asic[18]=82.5770 Asic[19]=82.2920 Asic[20]=80.8150 Asic[21]=84.0200 Asic[22]=83.3150 Asic[23]=4.68000 Asic[24]=79.2380 
Asic[25]=80.8150 Asic[26]=79.8420 Asic[27]=78.8520 Asic[28]=78.8860 Asic[29]=85.9660 Asic[30]=79.8590 Asic[31]=76.8060 Asic[32]=78.3160 
Asic[33]=78.4160 Asic[34]=74.9100 Asic[35]=80.0270 Asic[36]=77.5770 Asic[37]=75.1610 Asic[38]=79.6910 Asic[39]=71.5880 Asic[40]=77.8120 
Asic[41]=81.2350 Asic[42]=86.0500 Asic[43]=79.9260 Asic[44]=83.6170 Asic[45]=80.0600 Asic[46]=83.2820 Asic[47]=85.0600 Asic[48]=75.0270 
Asic[49]=75.0270 Asic[50]=82.8960 Asic[51]=79.5910 Asic[52]=80.1270 Asic[53]=81.6370 Asic[54]=78.0640 Asic[55]=78.7010 Asic[56]=85.8490 
Asic[57]=81.4030 Asic[58]=83.4490 Asic[59]=87.2750 Asic[60]=81.1510 Asic[61]=74.2890 Asic[62]=81.8390 Asic[63]=78.2990 

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=77.5440 Asic[02]=78.3830 Asic[03]=79.5400 Asic[04]=80.8820 Asic[05]=78.6180 Asic[06]=79.5740 Asic[07]=41.1710 Asic[08]=75.4800 
Asic[09]=83.1640 Asic[10]=83.6000 Asic[11]=73.7860 Asic[12]=74.4900 Asic[13]=79.6580 Asic[14]=81.3020 Asic[15]=74.0210 Asic[16]=81.1680 
Asic[17]=80.0940 Asic[18]=79.3050 Asic[19]=78.6680 Asic[20]=80.8820 Asic[21]=79.2220 Asic[22]=81.4530 Asic[23]=76.4870 Asic[24]=76.4360 
Asic[25]=81.2010 Asic[26]=79.3390 Asic[27]=82.3090 Asic[28]=78.6850 Asic[29]=78.5840 Asic[30]=83.5330 Asic[31]=80.5470 Asic[32]=78.3160 
Asic[33]=79.0030 Asic[34]=79.5570 Asic[35]=75.9500 Asic[36]=79.9430 Asic[37]=87.2240 Asic[38]=77.3090 Asic[39]=77.1580 Asic[40]=82.6780 
Asic[41]=75.2790 Asic[42]=82.3250 Asic[43]=84.7580 Asic[44]=79.4730 Asic[45]=79.8420 Asic[46]=14.1590 Asic[47]=78.0140 Asic[48]=79.7750 
Asic[49]=80.0440 Asic[50]=80.6810 Asic[51]=38.3350 Asic[52]=75.2120 Asic[53]=80.5800 Asic[54]=73.6680 Asic[55]=77.5440 Asic[56]=78.5340 
Asic[57]=78.2650 Asic[58]=76.0340 Asic[59]=77.5440 Asic[60]=82.7620 Asic[61]=80.8990 Asic[62]=80.8990 Asic[63]=78.3830 
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Asic[29]=131.030000
Asic[57]=123.966000
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
read failed on Chain[5] Chip[62] middle Temp old value:50
Special fix Chain[5] Chip[62] middle Temp = 50
Done read temp on Chain[5]
Chain[6] Chip[244] pcb temperature=40
Chain[6] Chip[62] junction temperature=52
Special fix Chain[6] Chip[62] middle Temp = 55
Done read temp on Chain[6]
Chain[7] Chip[244] pcb temperature=40
Chain[7] Chip[62] junction temperature=50
Special fix Chain[7] Chip[62] middle Temp = 55
Done read temp on Chain[7]
Max pcb temp : 40
Read temp failed, set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=0
10  Bitcoin / Mining support / Re: One Hashboard Low Hashrate - High HWerro - Temp 15 Help on: September 06, 2019, 09:21:04 PM
So you are saying damaged temp sensor might cause hashboard to act like that? I will first try reset and then run again. As for sensor, it sometimes shows the temp and works normal, so weird but will do as u say. Hope it gets to a solution.

Btw, I have some more devices that shows 4-5 fans and none of them have issues like this so I dont think its related to fans.
11  Bitcoin / Mining support / One Hashboard Low Hashrate - High HWerro - Temp 15 Help on: September 05, 2019, 12:49:05 PM
That hashboard started to act weirdly. It shows 15 Temp and hashes at a low rate. I failed to figure out what might be wrong with it. Maybe some of you have experienced that and fixed the situation so that I wanted to ask for help. What might be the issue?

https://i.ibb.co/z7XLyT1/Ekran-Al-nt-s.jpg

Here is kernel

Code:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000302] ps7-ttc #0 at df804000, irq=43
[    0.000606] Console: colour dummy device 80x30
[    0.000635] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.100249] pid_max: default: 32768 minimum: 301
[    0.100460] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.100480] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102670] CPU: Testing write buffer coherency: ok
[    0.102991] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.103048] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.103268] L310 cache controller enabled
[    0.103287] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.180993] CPU1: Booted secondary processor
[    0.270225] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.270357] Brought up 2 CPUs
[    0.270375] SMP: Total of 2 processors activated.
[    0.270384] CPU: All CPU(s) started in SVC mode.
[    0.271044] devtmpfs: initialized
[    0.273477] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.274676] regulator-dummy: no parameters
[    0.282062] NET: Registered protocol family 16
[    0.284281] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.286555] cpuidle: using governor ladder
[    0.286568] cpuidle: using governor menu
[    0.293942] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.295458] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.295472] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.295585] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.317381] bio: create slab <bio-0> at 0
[    0.318785] vgaarb: loaded
[    0.319491] SCSI subsystem initialized
[    0.320528] usbcore: registered new interface driver usbfs
[    0.320713] usbcore: registered new interface driver hub
[    0.320931] usbcore: registered new device driver usb
[    0.321479] media: Linux media interface: v0.10
[    0.321640] Linux video capture interface: v2.00
[    0.321876] pps_core: LinuxPPS API ver. 1 registered
[    0.321888] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.322009] PTP clock support registered
[    0.322367] EDAC MC: Ver: 3.0.0
[    0.323571] Advanced Linux Sound Architecture Driver Initialized.
[    0.326306] DMA-API: preallocated 4096 debug entries
[    0.326321] DMA-API: debugging enabled by kernel config
[    0.326395] Switched to clocksource arm_global_timer
[    0.347376] NET: Registered protocol family 2
[    0.348032] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.348089] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.348174] TCP: Hash tables configured (established 4096 bind 4096)
[    0.348217] TCP: reno registered
[    0.348233] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.348264] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.348501] NET: Registered protocol family 1
[    0.348839] RPC: Registered named UNIX socket transport module.
[    0.348852] RPC: Registered udp transport module.
[    0.348860] RPC: Registered tcp transport module.
[    0.348868] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.348880] PCI: CLS 0 bytes, default 64
[    0.349302] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.351298] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.353359] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.353555] msgmni has been set to 967
[    0.354321] io scheduler noop registered
[    0.354334] io scheduler deadline registered
[    0.354371] io scheduler cfq registered (default)
[    0.365112] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.365131] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.489423] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.056739] console [ttyPS0] enabled
[    1.060989] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.068609] [drm] Initialized drm 1.1.0 20060810
[    1.085604] brd: module loaded
[    1.094986] loop: module loaded
[    1.104356] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.110178] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.117947] libphy: XEMACPS mii bus: probed
[    1.122318] ------------- phy_id = 0x3625e62
[    1.127241] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.135844] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.142498] ehci-pci: EHCI PCI platform driver
[    1.149882] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.156703] usbcore: registered new interface driver usb-storage
[    1.163555] mousedev: PS/2 mouse device common for all mice
[    1.169736] i2c /dev entries driver
[    1.176646] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.182127] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.188039] Xilinx Zynq CpuIdle Driver started
[    1.192877] sdhci: Secure Digital Host Controller Interface driver
[    1.199073] sdhci: Copyright(c) Pierre Ossman
[    1.203345] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.210173] mmc0: no vqmmc regulator found
[    1.214189] mmc0: no vmmc regulator found
[    1.256412] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.265121] usbcore: registered new interface driver usbhid
[    1.270633] usbhid: USB HID core driver
[    1.275352] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.281652] nand: Micron MT29F2G08ABAEAWP
[    1.285617] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.291556] Bad block table found at page 131008, version 0x01
[    1.297775] Bad block table found at page 130944, version 0x01
[    1.303825] 3 ofpart partitions found on MTD device pl353-nand
[    1.309609] Creating 3 MTD partitions on "pl353-nand":
[    1.314698] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.322741] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.330045] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.340785] TCP: cubic registered
[    1.344017] NET: Registered protocol family 17
[    1.348714] Registering SWP/SWPB emulation handler
[    1.354586] regulator-dummy: disabling
[    1.358928] UBI: attaching mtd1 to ubi0
[    1.883765] UBI: scanning is finished
[    1.895360] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.902445] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.909206] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.915871] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.922749] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.928729] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.935836] UBI: max/mean erase counter: 6/3, WL threshold: 4096, image sequence number: 267830735
[    1.944792] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.954008] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.954014] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.958027] ALSA device list:
[    1.958031]   No soundcards found.
[    1.974312] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    2.003247] UBIFS: recovery needed
[    2.093469] UBIFS: recovery completed
[    2.097157] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.103081] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.112215] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.122099] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.127140] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 68024B66-D002-4EAC-85B6-9A9AE3C1123E, small LPT model
[    2.138432] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.145374] devtmpfs: mounted
[    2.148510] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    2.985726] random: dd urandom read with 1 bits of entropy available
[    3.396440] 
[    3.396440] bcm54xx_config_init
[    4.456415] 
[    4.456415] bcm54xx_config_init
[    7.457280] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    7.463372] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   20.067029] In axi fpga driver!
[   20.070099] request_mem_region OK!
[   20.073489] AXI fpga dev virtual address is 0xdf9fe000
[   20.078623] *base_vir_addr = 0xc51e
[   20.093162] In fpga mem driver!
[   20.096546] request_mem_region OK!
[   20.100050] fpga mem virtual address is 0xe2000000
[   20.895840] 
[   20.895840] bcm54xx_config_init
[   21.995730] 
[   21.995730] bcm54xx_config_init
[   24.996250] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   25.002265] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  325.692096] 
[  325.692096] bcm54xx_config_init
[  328.692492] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[  328.698513] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  394.182433] random: nonblocking pool is initialized
log_level = 4
This is XILINX board. Totalram:       507486208
Detect 512MB control board of XILINX
mmap axi_fpga_addr = 0xb6fb4000
axi_fpga_addr data = 0xc51e
mmap fpga_mem_addr = 0xb5dad000
forceFreq=-1 forceFlag=0
min work minertest[0]:912


DETECT HW version=0000c51e
miner ID : 8044a5c676808814
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
read pic freq and badcore num...
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[10] has core num=4
Chain[5] ASIC[22] has core num=15
Chain[5] ASIC[33] has core num=1
Chain[5] ASIC[45] has core num=14
Chain[5] ASIC[47] has core num=15
Chain[5] ASIC[52] has core num=15
Chain[5] ASIC[55] has core num=3
Check chain[5] PIC fw version=0x03
read pic freq and badcore num...
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Check chain[6] PIC fw version=0x03
read pic freq and badcore num...
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[15] has core num=15
Check chain[7] PIC fw version=0x03
get PIC voltage=125 on chain[5], value=870
get PIC voltage=125 on chain[6], value=870
get PIC voltage=125 on chain[7], value=870
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
total_exist_chain_num = 3
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 3, total chain num = 3 
single_board_frq_tuning enter
min_rate, des_rate, fix_volt:13800, 14000, 880
force_freq not set, don't need tuning
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 6544 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri May 31 10:59:27 CST 2019 type: Antminer S9
miner ID : 8044a5c676808814
get fan[1] speed=4800
Checking fans...
get fan[1] speed=4800
get fan[3] speed=4920
get fan[1] speed=4800
get fan[3] speed=4920
get fan[4] speed=4800
get fan[1] speed=4800
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x00 0x4f 0x00 0x4f 0x05 0x4f 0x00 0x4f 0x00 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x01 0x4f 0x01 0x4f 0x0f 0x4f 0x0f 0x4f 0x0f 0x4f 0x0f 0x4f 0x05 0x4f 0x07 0x4f 0x23 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=870
No scan based on domain
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x00 0x4c 0x00 0x4c 0x04 0x4c 0x0c 0x4c 0x00 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x05 0x4c 0x07 0x4c 0x23 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=3 : 0
Chain[J7] has backup chain_voltage=870
scan based on domain
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x00 0x4c 0x00 0x4c 0x04 0x4c 0x0c 0x4c 0x00 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x01 0x4c 0x01 0x4c 0x0f 0x4c 0x0f 0x4c 0x0f 0x4c 0x0f 0x4c 0x05 0x4c 0x07 0x4c 0x23 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=870
No scan based on domain
Check chain[7] PIC fw version=0x03
total_exist_chain_num = 3
Chain[J6] orignal chain_voltage_pic=125 value=870
Chain[J6] original chain_voltage_value=870 adjusted chain_voltage_value:870, value=870
Chain[J7] orignal chain_voltage_pic=125 value=870
Chain[J7] original chain_voltage_value=870 adjusted chain_voltage_value:870, value=870
Chain[J8] orignal chain_voltage_pic=125 value=870
Chain[J8] original chain_voltage_value=870 adjusted chain_voltage_value:870, value=870
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[10] has core num=4
Chain[J6] ASIC[22] has core num=15
Chain[J6] ASIC[33] has core num=1
Chain[J6] ASIC[45] has core num=14
Chain[J6] ASIC[47] has core num=15
Chain[J6] ASIC[52] has core num=15
Chain[J6] ASIC[55] has core num=3
Chain[J7] has core num in PIC
Chain[J8] has core num in PIC
Chain[J8] ASIC[15] has core num=15
miner total rate=14094GH/s ideal_total_hash_rate = 14000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=687
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681 
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681 
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681 
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681 
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687 
Asic[40]:687 Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687 
Asic[48]:687 Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687 
Asic[56]:687 Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687 
Chain:5 max freq=687
Chain:5 min freq=681

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:662 Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 
Asic[ 8]:662 Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662 
Chain:6 max freq=662
Chain:6 min freq=662

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=662
Asic[ 0]:662 Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 
Asic[ 8]:662 Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662 
Chain:7 max freq=662
Chain:7 min freq=662


Miner fix freq ...
totalRate = 14094, fixed_totalRate = 14140
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=687
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681 
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681 
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681 
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681 
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687 
Asic[40]:687 Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687 
Asic[48]:687 Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687 
Asic[56]:687 Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687 
Chain:5 max freq=687
Chain:5 min freq=681

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:662 Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 
Asic[ 8]:662 Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662 
Chain:6 max freq=662
Chain:6 min freq=662

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=662
Asic[ 0]:662 Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 
Asic[ 8]:662 Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662 
Chain:7 max freq=662
Chain:7 min freq=662

max freq = 687
totalRate = 14094, fixed_totalRate = 14000
set baud=1
Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:42 remote:46 offset:27 
Chain[J6] chip[244] get middle temp offset=27 typeID=55
Chain[J7] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:42 remote:45 offset:28 
Chain[J7] chip[244] get middle temp offset=28 typeID=55
Chain[J8] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[8] temp chip I2C addr=0x98
chain[8] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[8] chip[244] local:42 remote:46 offset:27 
Chain[J8] chip[244] get middle temp offset=27 typeID=55
single board rate=4660 voltage limit=940 on chain[5]
get PIC voltage=870 on chain[5], check: must be < 940
single board rate=4754 voltage limit=940 on chain[6]
get PIC voltage=870 on chain[6], check: must be < 940
single board rate=4679 voltage limit=940 on chain[7]
get PIC voltage=870 on chain[7], check: must be < 940
setting to working voltage...
chain[5] set voltage to 930
chain[6] set voltage to 930
chain[7] set voltage to 930
chain[5] set voltage to 920
chain[6] set voltage to 920
chain[7] set voltage to 920
chain[5] set voltage to 910
chain[6] set voltage to 910
chain[7] set voltage to 910
chain[5] set voltage to 900
chain[6] set voltage to 900
chain[7] set voltage to 900
chain[5] set voltage to 890
chain[6] set voltage to 890
chain[7] set voltage to 890
chain[5] set voltage to 880
chain[6] set voltage to 880
chain[7] set voltage to 880
chain[5] set voltage to 870
chain[6] set voltage to 870
chain[7] set voltage to 870
start thread for read temp
setStartTimePoint total_tv_start_sys=898 total_tv_end_sys=899
restartNum = 2 , auto-reinit enabled...
mining.subscribe:{"id": 0, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9/14000"]}
bring_up_pcb_temp = 64
setting to working voltage...
voltage_check_done
avg hash rate = 12603.490264, ideal hash rate = 14000
hash rate is low...
re_open_core_times: 1
re_open_core enter
Before read Chain[J6] org chain_voltage_pic=125]
After read Chain[J6] new chain_voltage_pic=125 read pic=125
Before read Chain[J7] org chain_voltage_pic=125]
After read Chain[J7] new chain_voltage_pic=125 read pic=125
Before read Chain[J8] org chain_voltage_pic=125]
After read Chain[J8] new chain_voltage_pic=125 read pic=125
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[10] has core num=4
Chain[J6] ASIC[22] has core num=15
Chain[J6] ASIC[33] has core num=1
Chain[J6] ASIC[45] has core num=14
Chain[J6] ASIC[47] has core num=15
Chain[J6] ASIC[52] has core num=15
Chain[J6] ASIC[55] has core num=3
Chain[J7] has core num in PIC
Chain[J8] has core num in PIC
Chain[J8] ASIC[15] has core num=15
miner total rate=14001GH/s ideal_total_hash_rate = 14000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=687
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681 
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681 
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681 
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681 
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687 
Asic[40]:687 Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687 
Asic[48]:687 Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687 
Asic[56]:687 Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687 
Chain:5 max freq=687
Chain:5 min freq=681

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:656 Asic[62]:656 
Chain:6 max freq=656
Chain:6 min freq=650

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=662
Asic[ 0]:656 Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656 
Asic[ 8]:656 Asic[ 9]:656 Asic[10]:656 Asic[11]:656 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662 
Chain:7 max freq=662
Chain:7 min freq=656


Miner fix freq ...
totalRate = 14001, fixed_totalRate = 14140
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=687
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681 
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681 
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681 
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681 
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687 
Asic[40]:687 Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687 
Asic[48]:687 Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687 
Asic[56]:687 Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687 
Chain:5 max freq=687
Chain:5 min freq=681

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:656 Asic[62]:656 
Chain:6 max freq=656
Chain:6 min freq=650

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=662
Asic[ 0]:656 Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656 
Asic[ 8]:656 Asic[ 9]:656 Asic[10]:656 Asic[11]:656 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662 
Chain:7 max freq=662
Chain:7 min freq=656

max freq = 687
totalRate = 14001, fixed_totalRate = 14000
set baud=1
Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:60 remote:64 offset:29 
Chain[J6] chip[244] get middle temp offset=29 typeID=55
Chain[J7] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:55 remote:58 offset:30 
Chain[J7] chip[244] get middle temp offset=30 typeID=55
Chain[J8] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[8] temp chip I2C addr=0x98
chain[8] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[8] chip[244] local:53 remote:57 offset:29 
Chain[J8] chip[244] get middle temp offset=29 typeID=55
setting to working voltage...
chain[5] set voltage to 930
chain[6] set voltage to 930
chain[7] set voltage to 930
chain[5] set voltage to 920
chain[6] set voltage to 920
chain[7] set voltage to 920
chain[5] set voltage to 910
chain[6] set voltage to 910
chain[7] set voltage to 910
chain[5] set voltage to 900
chain[6] set voltage to 900
chain[7] set voltage to 900
chain[5] set voltage to 890
chain[6] set voltage to 890
chain[7] set voltage to 890
chain[5] set voltage to 880
chain[6] set voltage to 880
chain[7] set voltage to 880
chain[5] set voltage to 870
chain[6] set voltage to 870
chain[7] set voltage to 870
reopen core end
re_open_core_times: 2
re_open_core enter
Before read Chain[J6] org chain_voltage_pic=125]
After read Chain[J6] new chain_voltage_pic=125 read pic=125
Before read Chain[J7] org chain_voltage_pic=125]
After read Chain[J7] new chain_voltage_pic=125 read pic=125
Before read Chain[J8] org chain_voltage_pic=125]
After read Chain[J8] new chain_voltage_pic=125 read pic=125
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[10] has core num=4
Chain[J6] ASIC[22] has core num=15
Chain[J6] ASIC[33] has core num=1
Chain[J6] ASIC[45] has core num=14
Chain[J6] ASIC[47] has core num=15
Chain[J6] ASIC[52] has core num=15
Chain[J6] ASIC[55] has core num=3
Chain[J7] has core num in PIC
Chain[J8] has core num in PIC
Chain[J8] ASIC[15] has core num=15
miner total rate=14001GH/s ideal_total_hash_rate = 14000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=687
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681 
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681 
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681 
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681 
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687 
Asic[40]:687 Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687 
Asic[48]:687 Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687 
Asic[56]:687 Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687 
Chain:5 max freq=687
Chain:5 min freq=681

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:656 Asic[62]:656 
Chain:6 max freq=656
Chain:6 min freq=650

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=662
Asic[ 0]:656 Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656 
Asic[ 8]:656 Asic[ 9]:656 Asic[10]:656 Asic[11]:656 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662 
Chain:7 max freq=662
Chain:7 min freq=656


Miner fix freq ...
totalRate = 14001, fixed_totalRate = 14140
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=687
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681 
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681 
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681 
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681 
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687 
Asic[40]:687 Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687 
Asic[48]:687 Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687 
Asic[56]:687 Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687 
Chain:5 max freq=687
Chain:5 min freq=681

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:656 Asic[62]:656 
Chain:6 max freq=656
Chain:6 min freq=650

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=662
Asic[ 0]:656 Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656 
Asic[ 8]:656 Asic[ 9]:656 Asic[10]:656 Asic[11]:656 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662 
Chain:7 max freq=662
Chain:7 min freq=656

max freq = 687
totalRate = 14001, fixed_totalRate = 14000
set baud=1
Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
Warning: Chain[5] chip[244] local:59 remote:-64 offset:-100, will fixed offset=27
New offset Chain[6] chip[244] local:59 remote:-64 offset:27 
Chain[J6] chip[244] get middle temp offset=27 typeID=55
Chain[J7] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:54 remote:56 offset:31 
Chain[J7] chip[244] get middle temp offset=31 typeID=55
Chain[J8] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[8] temp chip I2C addr=0x98
chain[8] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[8] chip[244] local:52 remote:56 offset:28 
Chain[J8] chip[244] get middle temp offset=28 typeID=55
setting to working voltage...
chain[5] set voltage to 930
chain[6] set voltage to 930
chain[7] set voltage to 930
chain[5] set voltage to 920
chain[6] set voltage to 920
chain[7] set voltage to 920
chain[5] set voltage to 910
chain[6] set voltage to 910
chain[7] set voltage to 910
chain[5] set voltage to 900
chain[6] set voltage to 900
chain[7] set voltage to 900
chain[5] set voltage to 890
chain[6] set voltage to 890
chain[7] set voltage to 890
chain[5] set voltage to 880
chain[6] set voltage to 880
chain[7] set voltage to 880
chain[5] set voltage to 870
chain[6] set voltage to 870
chain[7] set voltage to 870
reopen core end
avg_rate = 12577, ideal_total_hash_rate = 14000
re_open_core_times: 3
re_open_core enter
Before read Chain[J6] org chain_voltage_pic=125]
After read Chain[J6] new chain_voltage_pic=125 read pic=125
Before read Chain[J7] org chain_voltage_pic=125]
After read Chain[J7] new chain_voltage_pic=125 read pic=125
Before read Chain[J8] org chain_voltage_pic=125]
After read Chain[J8] new chain_voltage_pic=125 read pic=125
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[10] has core num=4
Chain[J6] ASIC[22] has core num=15
Chain[J6] ASIC[33] has core num=1
Chain[J6] ASIC[45] has core num=14
Chain[J6] ASIC[47] has core num=15
Chain[J6] ASIC[52] has core num=15
Chain[J6] ASIC[55] has core num=3
Chain[J7] has core num in PIC
Chain[J8] has core num in PIC
Chain[J8] ASIC[15] has core num=15
miner total rate=14001GH/s ideal_total_hash_rate = 14000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=687
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681 
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681 
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681 
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681 
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687 
Asic[40]:687 Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687 
Asic[48]:687 Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687 
Asic[56]:687 Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687 
Chain:5 max freq=687
Chain:5 min freq=681

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:656 Asic[62]:656 
Chain:6 max freq=656
Chain:6 min freq=650

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=662
Asic[ 0]:656 Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656 
Asic[ 8]:656 Asic[ 9]:656 Asic[10]:656 Asic[11]:656 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662 
Chain:7 max freq=662
Chain:7 min freq=656


Miner fix freq ...
totalRate = 14001, fixed_totalRate = 14140
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=687
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681 
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681 
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681 
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681 
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687 
Asic[40]:687 Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687 
Asic[48]:687 Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687 
Asic[56]:687 Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687 
Chain:5 max freq=687
Chain:5 min freq=681

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:656 Asic[62]:656 
Chain:6 max freq=656
Chain:6 min freq=650

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=662
Asic[ 0]:656 Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656 
Asic[ 8]:656 Asic[ 9]:656 Asic[10]:656 Asic[11]:656 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662 
Chain:7 max freq=662
Chain:7 min freq=656

max freq = 687
totalRate = 14001, fixed_totalRate = 14000
set baud=1
Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:58 remote:62 offset:29 
Chain[J6] chip[244] get middle temp offset=29 typeID=55
Chain[J7] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:53 remote:56 offset:30 
Chain[J7] chip[244] get middle temp offset=30 typeID=55
Chain[J8] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[8] temp chip I2C addr=0x98
chain[8] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[8] chip[244] local:51 remote:55 offset:28 
Chain[J8] chip[244] get middle temp offset=28 typeID=55
setting to working voltage...
chain[5] set voltage to 930
chain[6] set voltage to 930
chain[7] set voltage to 930
chain[5] set voltage to 920
chain[6] set voltage to 920
chain[7] set voltage to 920
chain[5] set voltage to 910
chain[6] set voltage to 910
chain[7] set voltage to 910
chain[5] set voltage to 900
chain[6] set voltage to 900
chain[7] set voltage to 900
chain[5] set voltage to 890
chain[6] set voltage to 890
chain[7] set voltage to 890
chain[5] set voltage to 880
chain[6] set voltage to 880
chain[7] set voltage to 880
do read_temp_func once...

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000 
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000 
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000 
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=368.259 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000 
Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=0.00000 Asic[38]=0.00000 Asic[39]=0.00000 Asic[40]=0.00000 
Asic[41]=0.00000 Asic[42]=0.00000 Asic[43]=0.00000 Asic[44]=0.00000 Asic[45]=0.00000 Asic[46]=0.00000 Asic[47]=0.00000 Asic[48]=0.00000 
Asic[49]=0.00000 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=0.00000 Asic[53]=0.00000 Asic[54]=0.00000 Asic[55]=0.00000 Asic[56]=0.00000 
Asic[57]=348.345 Asic[58]=0.00000 Asic[59]=0.00000 Asic[60]=0.00000 Asic[61]=0.00000 Asic[62]=0.00000 Asic[63]=0.00000 

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=42.1440 Asic[02]=50.4650 Asic[03]=52.8810 Asic[04]=76.5040 Asic[05]=71.9400 Asic[06]=28.9910 Asic[07]=50.7340 Asic[08]=48.8550 
Asic[09]=63.8870 Asic[10]=77.3090 Asic[11]=60.3970 Asic[12]=56.3710 Asic[13]=55.8340 Asic[14]=72.7460 Asic[15]=56.1030 Asic[16]=61.4710 
Asic[17]=67.1080 Asic[18]=53.1500 Asic[19]=61.7400 Asic[20]=74.0880 Asic[21]=67.6450 Asic[22]=52.0760 Asic[23]=52.6130 Asic[24]=39.1910 
Asic[25]=52.0760 Asic[26]=50.1970 Asic[27]=31.4060 Asic[28]=78.3830 Asic[29]=354.401 Asic[30]=58.2500 Asic[31]=27.3800 Asic[32]=56.3710 
Asic[33]=74.3560 Asic[34]=81.6040 Asic[35]=26.3060 Asic[36]=39.9960 Asic[37]=52.6130 Asic[38]=69.5240 Asic[39]=36.2380 Asic[40]=36.5070 
Asic[41]=47.2440 Asic[42]=45.6340 Asic[43]=75.1610 Asic[44]=39.1910 Asic[45]=81.3350 Asic[46]=65.7660 Asic[47]=44.8280 Asic[48]=29.7960 
Asic[49]=65.2290 Asic[50]=53.4180 Asic[51]=47.2440 Asic[52]=53.9550 Asic[53]=44.8280 Asic[54]=41.0700 Asic[55]=65.4980 Asic[56]=62.5450 
Asic[57]=333.346 Asic[58]=57.1760 Asic[59]=51.2710 Asic[60]=24.9640 Asic[61]=73.5510 Asic[62]=52.8810 Asic[63]=46.1700 

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=45.5500 Asic[02]=71.9400 Asic[03]=73.7520 Asic[04]=59.2570 Asic[05]=45.5330 Asic[06]=36.5570 Asic[07]=55.7330 Asic[08]=57.0250 
Asic[09]=39.5940 Asic[10]=62.4610 Asic[11]=33.1350 Asic[12]=65.2460 Asic[13]=50.7670 Asic[14]=57.6630 Asic[15]=54.6930 Asic[16]=51.0860 
Asic[17]=40.0470 Asic[18]=31.2390 Asic[19]=50.1470 Asic[20]=31.3060 Asic[21]=31.2550 Asic[22]=59.1730 Asic[23]=55.1290 Asic[24]=49.2570 
Asic[25]=51.6730 Asic[26]=34.7950 Asic[27]=49.5930 Asic[28]=43.9730 Asic[29]=357.589 Asic[30]=70.2120 Asic[31]=40.3650 Asic[32]=49.5930 
Asic[33]=66.4040 Asic[34]=43.5530 Asic[35]=56.6730 Asic[36]=22.9170 Asic[37]=42.5470 Asic[38]=52.6130 Asic[39]=46.3890 Asic[40]=55.7170 
Asic[41]=87.0730 Asic[42]=39.3250 Asic[43]=59.8440 Asic[44]=61.2360 Asic[45]=68.3500 Asic[46]=43.0160 Asic[47]=63.9040 Asic[48]=50.0960 
Asic[49]=48.7040 Asic[50]=42.2780 Asic[51]=62.8130 Asic[52]=59.5420 Asic[53]=37.3960 Asic[54]=61.2360 Asic[55]=47.1770 Asic[56]=72.3760 
Asic[57]=338.983 Asic[58]=82.7450 Asic[59]=46.2210 Asic[60]=39.4260 Asic[61]=32.0610 Asic[62]=45.5830 Asic[63]=61.6560 
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Asic[29]=368.259000
Asic[57]=348.345000
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Asic[29]=354.401000
Asic[57]=333.346000
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Asic[29]=357.589000
Asic[57]=338.983000
Done check_asic_reg
Chain[5] Chip[244] pcb temperature=61
Chain[5] Chip[62] junction temperature=77
Special fix Chain[5] Chip[62] middle Temp = 76
Done read temp on Chain[5]
read failed on Chain[6] Chip[62] middle Temp old value:0
Special fix Chain[6] Chip[62] middle Temp = 15
Done read temp on Chain[6]
Chain[7] Chip[244] pcb temperature=58
Chain[7] Chip[62] junction temperature=69
Special fix Chain[7] Chip[62] middle Temp = 73
Done read temp on Chain[7]
Max pcb temp : 61
Read temp failed, set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=11219
12  Bitcoin / Mining support / Re: Antminer S9 One Hashboard Does Not Hash on: August 16, 2019, 01:03:09 PM
Thank you for the help especially Mikeywith, Its still acting same with reduced freq and checked about power. I will try to use Braiins to lower then frequency of just that faulty board. Because maybe, the device needs to catch "expected" hashrate somehow and when I lower freq with bitmain firmware it still cant catch the expected hashrate. These devices are all mystery to all and always will be. Its just trial and error.
13  Bitcoin / Mining support / Re: Antminer S9 One Hashboard Does Not Hash on: August 12, 2019, 05:43:21 PM
Hello good sirs, I know Im a little late but its some kind of holiday here. I wanna give more info. The device hashes 13.5+ for some hours and then goes back to 9 TH/h again. I dont think its a dying board, why would It work for hours then? It hashes for hours, then stops again, then again hashes. It has been like that for 2 days. Any idea?
14  Bitcoin / Mining support / Antminer S9 One Hashboard Does Not Hash on: August 10, 2019, 02:55:21 PM
When I run the device, it finds all 63 asics for all 3 boards but after 2-3 minutes, 3rd board stops hashing. What might be the issue here?

Kernel log here;
Code:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000296] ps7-ttc #0 at df804000, irq=43
[    0.000598] Console: colour dummy device 80x30
[    0.000628] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.090243] pid_max: default: 32768 minimum: 301
[    0.090452] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090471] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.092636] CPU: Testing write buffer coherency: ok
[    0.092945] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.093001] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.093223] L310 cache controller enabled
[    0.093243] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.170986] CPU1: Booted secondary processor
[    0.260220] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.260348] Brought up 2 CPUs
[    0.260367] SMP: Total of 2 processors activated.
[    0.260376] CPU: All CPU(s) started in SVC mode.
[    0.261034] devtmpfs: initialized
[    0.263463] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.264638] regulator-dummy: no parameters
[    0.272002] NET: Registered protocol family 16
[    0.274280] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.276542] cpuidle: using governor ladder
[    0.276555] cpuidle: using governor menu
[    0.283870] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.285386] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.285399] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.285509] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.307146] bio: create slab <bio-0> at 0
[    0.308531] vgaarb: loaded
[    0.309231] SCSI subsystem initialized
[    0.310128] usbcore: registered new interface driver usbfs
[    0.310438] usbcore: registered new interface driver hub
[    0.310666] usbcore: registered new device driver usb
[    0.311206] media: Linux media interface: v0.10
[    0.311369] Linux video capture interface: v2.00
[    0.311614] pps_core: LinuxPPS API ver. 1 registered
[    0.311626] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.311748] PTP clock support registered
[    0.312101] EDAC MC: Ver: 3.0.0
[    0.313290] Advanced Linux Sound Architecture Driver Initialized.
[    0.316023] DMA-API: preallocated 4096 debug entries
[    0.316036] DMA-API: debugging enabled by kernel config
[    0.316105] Switched to clocksource arm_global_timer
[    0.336648] NET: Registered protocol family 2
[    0.337300] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.337357] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.337442] TCP: Hash tables configured (established 4096 bind 4096)
[    0.337483] TCP: reno registered
[    0.337499] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.337530] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.337756] NET: Registered protocol family 1
[    0.338092] RPC: Registered named UNIX socket transport module.
[    0.338104] RPC: Registered udp transport module.
[    0.338113] RPC: Registered tcp transport module.
[    0.338121] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.338133] PCI: CLS 0 bytes, default 64
[    0.338553] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.340547] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.342563] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.342756] msgmni has been set to 967
[    0.343515] io scheduler noop registered
[    0.343529] io scheduler deadline registered
[    0.343570] io scheduler cfq registered (default)
[    0.353649] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.353669] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.478482] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.046022] console [ttyPS0] enabled
[    1.050301] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.057932] [drm] Initialized drm 1.1.0 20060810
[    1.074833] brd: module loaded
[    1.084204] loop: module loaded
[    1.093616] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.099599] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.107591] libphy: XEMACPS mii bus: probed
[    1.111958] ------------- phy_id = 0x3625e62
[    1.116755] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.125364] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.132022] ehci-pci: EHCI PCI platform driver
[    1.139260] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.146050] usbcore: registered new interface driver usb-storage
[    1.152929] mousedev: PS/2 mouse device common for all mice
[    1.159113] i2c /dev entries driver
[    1.165990] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.171508] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.177421] Xilinx Zynq CpuIdle Driver started
[    1.182261] sdhci: Secure Digital Host Controller Interface driver
[    1.188399] sdhci: Copyright(c) Pierre Ossman
[    1.192698] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.199569] mmc0: no vqmmc regulator found
[    1.203587] mmc0: no vmmc regulator found
[    1.246127] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.254805] usbcore: registered new interface driver usbhid
[    1.260309] usbhid: USB HID core driver
[    1.265015] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.271305] nand: Micron MT29F2G08ABAEAWP
[    1.275274] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.281215] Bad block table found at page 131008, version 0x01
[    1.287441] Bad block table found at page 130944, version 0x01
[    1.293490] 3 ofpart partitions found on MTD device pl353-nand
[    1.299277] Creating 3 MTD partitions on "pl353-nand":
[    1.304365] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.312408] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.319750] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.330455] TCP: cubic registered
[    1.333691] NET: Registered protocol family 17
[    1.338383] Registering SWP/SWPB emulation handler
[    1.344267] regulator-dummy: disabling
[    1.348596] UBI: attaching mtd1 to ubi0
[    1.658442] UBI: scanning is finished
[    1.679060] UBI: volume 0 ("rootfs") re-sized from 192 to 1108 LEBs
[    1.686151] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.693207] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.699998] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.706684] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.713517] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.719527] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.726638] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 267830735
[    1.735565] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.744794] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.744801] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.760924] ALSA device list:
[    1.763808]   No soundcards found.
[    1.776190] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    1.881961] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.887903] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    1.897014] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    1.906903] UBIFS: reserved for root: 0 bytes (0 KiB)
[    1.911935] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 68024B66-D002-4EAC-85B6-9A9AE3C1123E, small LPT model
[    1.930844] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.006980] devtmpfs: mounted
[    2.010087] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    3.258413] random: dd urandom read with 1 bits of entropy available
[    3.856123] 
[    3.856123] bcm54xx_config_init
[    4.936131] 
[    4.936131] bcm54xx_config_init
[    8.936983] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    8.943068] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   23.566452] In axi fpga driver!
[   23.569520] request_mem_region OK!
[   23.572910] AXI fpga dev virtual address is 0xdf9fe000
[   23.578043] *base_vir_addr = 0xc51e
[   23.592849] In fpga mem driver!
[   23.596030] request_mem_region OK!
[   23.599651] fpga mem virtual address is 0xe2000000
[   24.376128] 
[   24.376128] bcm54xx_config_init
[   25.466160] 
[   25.466160] bcm54xx_config_init
[   29.466990] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   29.473009] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  245.721907] 
[  245.721907] bcm54xx_config_init
[  248.722763] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[  248.728785] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  486.432143] random: nonblocking pool is initialized
log_level = 4
This is XILINX board. Totalram:       507486208
Detect 512MB control board of XILINX
mmap axi_fpga_addr = 0xb6fa8000
axi_fpga_addr data = 0xc51e
mmap fpga_mem_addr = 0xb5da1000
forceFreq=-1 forceFlag=0
min work minertest[0]:912


DETECT HW version=0000c51e
miner ID : 80281c2815408814
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
read pic freq and badcore num...
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[0] has core num=1
Chain[5] ASIC[1] has core num=1
Chain[5] ASIC[2] has core num=1
Chain[5] ASIC[3] has core num=1
Chain[5] ASIC[4] has core num=1
Chain[5] ASIC[5] has core num=1
Chain[5] ASIC[6] has core num=1
Chain[5] ASIC[7] has core num=1
Chain[5] ASIC[8] has core num=1
Chain[5] ASIC[9] has core num=1
Chain[5] ASIC[10] has core num=1
Chain[5] ASIC[11] has core num=12
Chain[5] ASIC[12] has core num=1
Chain[5] ASIC[13] has core num=1
Chain[5] ASIC[14] has core num=1
Chain[5] ASIC[15] has core num=2
Chain[5] ASIC[16] has core num=6
Chain[5] ASIC[17] has core num=1
Chain[5] ASIC[19] has core num=15
Chain[5] ASIC[20] has core num=1
Chain[5] ASIC[21] has core num=4
Chain[5] ASIC[22] has core num=1
Chain[5] ASIC[23] has core num=2
Chain[5] ASIC[24] has core num=4
Chain[5] ASIC[25] has core num=1
Chain[5] ASIC[26] has core num=3
Chain[5] ASIC[27] has core num=1
Chain[5] ASIC[28] has core num=1
Chain[5] ASIC[30] has core num=1
Chain[5] ASIC[31] has core num=1
Chain[5] ASIC[32] has core num=2
Chain[5] ASIC[33] has core num=1
Chain[5] ASIC[34] has core num=2
Chain[5] ASIC[35] has core num=1
Chain[5] ASIC[37] has core num=1
Chain[5] ASIC[38] has core num=1
Chain[5] ASIC[39] has core num=3
Chain[5] ASIC[40] has core num=1
Chain[5] ASIC[41] has core num=2
Chain[5] ASIC[42] has core num=2
Chain[5] ASIC[43] has core num=3
Chain[5] ASIC[44] has core num=3
Chain[5] ASIC[45] has core num=3
Chain[5] ASIC[46] has core num=1
Chain[5] ASIC[47] has core num=1
Chain[5] ASIC[48] has core num=1
Chain[5] ASIC[49] has core num=1
Chain[5] ASIC[50] has core num=1
Chain[5] ASIC[51] has core num=1
Chain[5] ASIC[52] has core num=1
Chain[5] ASIC[53] has core num=4
Chain[5] ASIC[54] has core num=2
Chain[5] ASIC[55] has core num=1
Chain[5] ASIC[57] has core num=1
Chain[5] ASIC[58] has core num=1
Chain[5] ASIC[59] has core num=2
Chain[5] ASIC[60] has core num=1
Chain[5] ASIC[61] has core num=1
Chain[5] ASIC[62] has core num=1
Check chain[5] PIC fw version=0x03
read pic freq and badcore num...
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[5] has core num=7
Chain[6] ASIC[16] has core num=15
Chain[6] ASIC[43] has core num=15
Check chain[6] PIC fw version=0x03
read pic freq and badcore num...
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[0] has core num=1
Chain[7] ASIC[1] has core num=1
Chain[7] ASIC[2] has core num=1
Chain[7] ASIC[3] has core num=1
Chain[7] ASIC[4] has core num=1
Chain[7] ASIC[5] has core num=2
Chain[7] ASIC[6] has core num=1
Chain[7] ASIC[7] has core num=1
Chain[7] ASIC[8] has core num=1
Chain[7] ASIC[9] has core num=1
Chain[7] ASIC[10] has core num=1
Chain[7] ASIC[11] has core num=1
Chain[7] ASIC[12] has core num=2
Chain[7] ASIC[13] has core num=1
Chain[7] ASIC[14] has core num=1
Chain[7] ASIC[15] has core num=3
Chain[7] ASIC[16] has core num=1
Chain[7] ASIC[17] has core num=1
Chain[7] ASIC[18] has core num=1
Chain[7] ASIC[19] has core num=1
Chain[7] ASIC[20] has core num=2
Chain[7] ASIC[21] has core num=1
Chain[7] ASIC[22] has core num=1
Chain[7] ASIC[23] has core num=1
Chain[7] ASIC[24] has core num=1
Chain[7] ASIC[25] has core num=1
Chain[7] ASIC[26] has core num=1
Chain[7] ASIC[27] has core num=1
Chain[7] ASIC[29] has core num=1
Chain[7] ASIC[30] has core num=1
Chain[7] ASIC[31] has core num=1
Chain[7] ASIC[32] has core num=2
Chain[7] ASIC[33] has core num=2
Chain[7] ASIC[34] has core num=1
Chain[7] ASIC[35] has core num=1
Chain[7] ASIC[36] has core num=1
Chain[7] ASIC[37] has core num=1
Chain[7] ASIC[38] has core num=1
Chain[7] ASIC[40] has core num=1
Chain[7] ASIC[41] has core num=1
Chain[7] ASIC[42] has core num=7
Chain[7] ASIC[43] has core num=1
Chain[7] ASIC[44] has core num=1
Chain[7] ASIC[45] has core num=3
Chain[7] ASIC[46] has core num=1
Chain[7] ASIC[47] has core num=1
Chain[7] ASIC[49] has core num=1
Chain[7] ASIC[50] has core num=1
Chain[7] ASIC[51] has core num=1
Chain[7] ASIC[52] has core num=1
Chain[7] ASIC[53] has core num=2
Chain[7] ASIC[54] has core num=1
Chain[7] ASIC[55] has core num=1
Chain[7] ASIC[56] has core num=1
Chain[7] ASIC[57] has core num=1
Chain[7] ASIC[58] has core num=1
Chain[7] ASIC[59] has core num=1
Chain[7] ASIC[60] has core num=1
Chain[7] ASIC[61] has core num=1
Chain[7] ASIC[62] has core num=2
Check chain[7] PIC fw version=0x03
get PIC voltage=91 on chain[5], value=890
get PIC voltage=125 on chain[6], value=870
get PIC voltage=91 on chain[7], value=890
chain[5] temp offset record: 62,-70,0,0,0,0,33,0
chain[5] temp chip I2C addr=0x98
chain[6] temp offset record: 62,-85,0,0,0,0,33,0
chain[6] temp chip I2C addr=0x98
chain[7] temp offset record: 62,-80,0,0,0,0,33,0
chain[7] temp chip I2C addr=0x98
total_exist_chain_num = 3
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 3, total chain num = 3 
single_board_frq_tuning enter
min_rate, des_rate, fix_volt:13800, 14000, 880
force_freq not set, don't need tuning
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found=24314 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri May 31 10:59:27 CST 2019 type: Antminer S9
miner ID : 80281c2815408814
Checking fans...
get fan[4] speed=4440
get fan[4] speed=4440
get fan[5] speed=6120
get fan[4] speed=4440
get fan[5] speed=6120
get fan[4] speed=4440
get fan[5] speed=6120
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x0b 0x4b 0x0a 0x4b 0x04 0x4b 0x0b 0x4b 0x00 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x01 0x4b 0x01 0x4b 0x0f 0x4b 0x0f 0x4b 0x0f 0x4b 0x0f 0x4b 0x05 0x4b 0x09 0x4b 0x23 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=890
No scan based on domain
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x0a 0x4e 0x0b 0x4e 0x04 0x4e 0x0e 0x4e 0x00 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x01 0x4e 0x01 0x4e 0x0f 0x4e 0x0f 0x4e 0x0f 0x4e 0x0f 0x4e 0x05 0x4e 0x07 0x4e 0x23 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=870
No scan based on domain
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x0b 0x48 0x00 0x48 0x04 0x48 0x08 0x48 0x00 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x01 0x48 0x01 0x48 0x0f 0x48 0x0f 0x48 0x0f 0x48 0x0f 0x48 0x05 0x48 0x09 0x48 0x23 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=890
No scan based on domain
Check chain[7] PIC fw version=0x03
total_exist_chain_num = 3
Chain[J6] original vol value=890 adjusted vol value:830
Chain[J6] orignal chain_voltage_pic=91 value=890
Chain[J6] original chain_voltage_value=890 adjusted chain_voltage_value:830, value=890
Chain[J6] will use backup chain_voltage_pic=830 [193]
Chain[J6] get working chain_voltage_pic=193
Chain[J6] Aisc[00] original freq=656 adjusted freq:450
Chain[J6] Aisc[01] original freq=656 adjusted freq:450
Chain[J6] Aisc[02] original freq=656 adjusted freq:450
Chain[J6] Aisc[03] original freq=656 adjusted freq:450
Chain[J6] Aisc[04] original freq=656 adjusted freq:450
Chain[J6] Aisc[05] original freq=656 adjusted freq:450
Chain[J6] Aisc[06] original freq=656 adjusted freq:450
Chain[J6] Aisc[07] original freq=656 adjusted freq:450
Chain[J6] Aisc[08] original freq=656 adjusted freq:450
Chain[J6] Aisc[09] original freq=656 adjusted freq:450
Chain[J6] Aisc[10] original freq=656 adjusted freq:450
Chain[J6] Aisc[11] original freq=656 adjusted freq:450
Chain[J6] Aisc[12] original freq=656 adjusted freq:450
Chain[J6] Aisc[13] original freq=656 adjusted freq:450
Chain[J6] Aisc[14] original freq=656 adjusted freq:450
Chain[J6] Aisc[15] original freq=656 adjusted freq:450
Chain[J6] Aisc[16] original freq=656 adjusted freq:450
Chain[J6] Aisc[17] original freq=656 adjusted freq:450
Chain[J6] Aisc[18] original freq=656 adjusted freq:450
Chain[J6] Aisc[19] original freq=656 adjusted freq:450
Chain[J6] Aisc[20] original freq=656 adjusted freq:450
Chain[J6] Aisc[21] original freq=656 adjusted freq:450
Chain[J6] Aisc[22] original freq=656 adjusted freq:450
Chain[J6] Aisc[23] original freq=656 adjusted freq:450
Chain[J6] Aisc[24] original freq=656 adjusted freq:450
Chain[J6] Aisc[25] original freq=656 adjusted freq:450
Chain[J6] Aisc[26] original freq=656 adjusted freq:450
Chain[J6] Aisc[27] original freq=656 adjusted freq:450
Chain[J6] Aisc[28] original freq=656 adjusted freq:450
Chain[J6] Aisc[29] original freq=656 adjusted freq:450
Chain[J6] Aisc[30] original freq=656 adjusted freq:450
Chain[J6] Aisc[31] original freq=656 adjusted freq:450
Chain[J6] Aisc[32] original freq=656 adjusted freq:450
Chain[J6] Aisc[33] original freq=656 adjusted freq:450
Chain[J6] Aisc[34] original freq=656 adjusted freq:450
Chain[J6] Aisc[35] original freq=656 adjusted freq:450
Chain[J6] Aisc[36] original freq=656 adjusted freq:450
Chain[J6] Aisc[37] original freq=656 adjusted freq:450
Chain[J6] Aisc[38] original freq=656 adjusted freq:450
Chain[J6] Aisc[39] original freq=656 adjusted freq:450
Chain[J6] Aisc[40] original freq=656 adjusted freq:450
Chain[J6] Aisc[41] original freq=656 adjusted freq:450
Chain[J6] Aisc[42] original freq=656 adjusted freq:450
Chain[J6] Aisc[43] original freq=656 adjusted freq:450
Chain[J6] Aisc[44] original freq=656 adjusted freq:450
Chain[J6] Aisc[45] original freq=656 adjusted freq:450
Chain[J6] Aisc[46] original freq=656 adjusted freq:450
Chain[J6] Aisc[47] original freq=656 adjusted freq:450
Chain[J6] Aisc[48] original freq=656 adjusted freq:450
Chain[J6] Aisc[49] original freq=656 adjusted freq:450
Chain[J6] Aisc[50] original freq=656 adjusted freq:450
Chain[J6] Aisc[51] original freq=656 adjusted freq:450
Chain[J6] Aisc[52] original freq=656 adjusted freq:450
Chain[J6] Aisc[53] original freq=656 adjusted freq:450
Chain[J6] Aisc[54] original freq=656 adjusted freq:450
Chain[J6] Aisc[55] original freq=656 adjusted freq:450
Chain[J6] Aisc[56] original freq=656 adjusted freq:450
Chain[J6] Aisc[57] original freq=656 adjusted freq:450
Chain[J6] Aisc[58] original freq=656 adjusted freq:450
Chain[J6] Aisc[59] original freq=656 adjusted freq:450
Chain[J6] Aisc[60] original freq=656 adjusted freq:450
Chain[J6] Aisc[61] original freq=656 adjusted freq:450
Chain[J6] Aisc[62] original freq=656 adjusted freq:450
Chain[J7] original vol value=870 adjusted vol value:830
Chain[J7] orignal chain_voltage_pic=125 value=870
Chain[J7] original chain_voltage_value=870 adjusted chain_voltage_value:830, value=870
Chain[J7] will use backup chain_voltage_pic=830 [193]
Chain[J7] get working chain_voltage_pic=193
Chain[J7] Aisc[00] original freq=675 adjusted freq:468
Chain[J7] Aisc[01] original freq=675 adjusted freq:468
Chain[J7] Aisc[02] original freq=675 adjusted freq:468
Chain[J7] Aisc[03] original freq=675 adjusted freq:468
Chain[J7] Aisc[04] original freq=675 adjusted freq:468
Chain[J7] Aisc[05] original freq=675 adjusted freq:468
Chain[J7] Aisc[06] original freq=675 adjusted freq:468
Chain[J7] Aisc[07] original freq=675 adjusted freq:468
Chain[J7] Aisc[08] original freq=675 adjusted freq:468
Chain[J7] Aisc[09] original freq=675 adjusted freq:468
Chain[J7] Aisc[10] original freq=675 adjusted freq:468
Chain[J7] Aisc[11] original freq=675 adjusted freq:468
Chain[J7] Aisc[12] original freq=675 adjusted freq:468
Chain[J7] Aisc[13] original freq=675 adjusted freq:468
Chain[J7] Aisc[14] original freq=675 adjusted freq:468
Chain[J7] Aisc[15] original freq=675 adjusted freq:468
Chain[J7] Aisc[16] original freq=675 adjusted freq:468
Chain[J7] Aisc[17] original freq=675 adjusted freq:468
Chain[J7] Aisc[18] original freq=675 adjusted freq:468
Chain[J7] Aisc[19] original freq=675 adjusted freq:468
Chain[J7] Aisc[20] original freq=675 adjusted freq:468
Chain[J7] Aisc[21] original freq=675 adjusted freq:468
Chain[J7] Aisc[22] original freq=675 adjusted freq:468
Chain[J7] Aisc[23] original freq=675 adjusted freq:468
Chain[J7] Aisc[24] original freq=675 adjusted freq:468
Chain[J7] Aisc[25] original freq=675 adjusted freq:468
Chain[J7] Aisc[26] original freq=675 adjusted freq:468
Chain[J7] Aisc[27] original freq=675 adjusted freq:468
Chain[J7] Aisc[28] original freq=675 adjusted freq:468
Chain[J7] Aisc[29] original freq=675 adjusted freq:468
Chain[J7] Aisc[30] original freq=675 adjusted freq:468
Chain[J7] Aisc[31] original freq=675 adjusted freq:468
Chain[J7] Aisc[32] original freq=675 adjusted freq:468
Chain[J7] Aisc[33] original freq=675 adjusted freq:468
Chain[J7] Aisc[34] original freq=675 adjusted freq:468
Chain[J7] Aisc[35] original freq=675 adjusted freq:468
Chain[J7] Aisc[36] original freq=675 adjusted freq:468
Chain[J7] Aisc[37] original freq=675 adjusted freq:468
Chain[J7] Aisc[38] original freq=675 adjusted freq:468
Chain[J7] Aisc[39] original freq=675 adjusted freq:468
Chain[J7] Aisc[40] original freq=675 adjusted freq:468
Chain[J7] Aisc[41] original freq=675 adjusted freq:468
Chain[J7] Aisc[42] original freq=675 adjusted freq:468
Chain[J7] Aisc[43] original freq=675 adjusted freq:468
Chain[J7] Aisc[44] original freq=675 adjusted freq:468
Chain[J7] Aisc[45] original freq=675 adjusted freq:468
Chain[J7] Aisc[46] original freq=675 adjusted freq:468
Chain[J7] Aisc[47] original freq=675 adjusted freq:468
Chain[J7] Aisc[48] original freq=675 adjusted freq:468
Chain[J7] Aisc[49] original freq=675 adjusted freq:468
Chain[J7] Aisc[50] original freq=675 adjusted freq:468
Chain[J7] Aisc[51] original freq=675 adjusted freq:468
Chain[J7] Aisc[52] original freq=675 adjusted freq:468
Chain[J7] Aisc[53] original freq=675 adjusted freq:468
Chain[J7] Aisc[54] original freq=675 adjusted freq:468
Chain[J7] Aisc[55] original freq=675 adjusted freq:468
Chain[J7] Aisc[56] original freq=675 adjusted freq:468
Chain[J7] Aisc[57] original freq=675 adjusted freq:468
Chain[J7] Aisc[58] original freq=675 adjusted freq:468
Chain[J7] Aisc[59] original freq=675 adjusted freq:468
Chain[J7] Aisc[60] original freq=675 adjusted freq:468
Chain[J7] Aisc[61] original freq=675 adjusted freq:468
Chain[J7] Aisc[62] original freq=675 adjusted freq:468
Chain[J8] original vol value=890 adjusted vol value:830
Chain[J8] orignal chain_voltage_pic=91 value=890
Chain[J8] original chain_voltage_value=890 adjusted chain_voltage_value:830, value=890
Chain[J8] will use backup chain_voltage_pic=830 [193]
Chain[J8] get working chain_voltage_pic=193
Chain[J8] Aisc[00] original freq=637 adjusted freq:429
Chain[J8] Aisc[01] original freq=637 adjusted freq:429
Chain[J8] Aisc[02] original freq=637 adjusted freq:429
Chain[J8] Aisc[03] original freq=637 adjusted freq:429
Chain[J8] Aisc[04] original freq=637 adjusted freq:429
Chain[J8] Aisc[05] original freq=637 adjusted freq:429
Chain[J8] Aisc[06] original freq=637 adjusted freq:429
Chain[J8] Aisc[07] original freq=637 adjusted freq:429
Chain[J8] Aisc[08] original freq=637 adjusted freq:429
Chain[J8] Aisc[09] original freq=637 adjusted freq:429
Chain[J8] Aisc[10] original freq=637 adjusted freq:429
Chain[J8] Aisc[11] original freq=637 adjusted freq:429
Chain[J8] Aisc[12] original freq=637 adjusted freq:429
Chain[J8] Aisc[13] original freq=637 adjusted freq:429
Chain[J8] Aisc[14] original freq=637 adjusted freq:429
Chain[J8] Aisc[15] original freq=637 adjusted freq:429
Chain[J8] Aisc[16] original freq=637 adjusted freq:429
Chain[J8] Aisc[17] original freq=637 adjusted freq:429
Chain[J8] Aisc[18] original freq=637 adjusted freq:429
Chain[J8] Aisc[19] original freq=637 adjusted freq:429
Chain[J8] Aisc[20] original freq=637 adjusted freq:429
Chain[J8] Aisc[21] original freq=637 adjusted freq:429
Chain[J8] Aisc[22] original freq=637 adjusted freq:429
Chain[J8] Aisc[23] original freq=637 adjusted freq:429
Chain[J8] Aisc[24] original freq=637 adjusted freq:429
Chain[J8] Aisc[25] original freq=637 adjusted freq:429
Chain[J8] Aisc[26] original freq=637 adjusted freq:429
Chain[J8] Aisc[27] original freq=637 adjusted freq:429
Chain[J8] Aisc[28] original freq=637 adjusted freq:429
Chain[J8] Aisc[29] original freq=637 adjusted freq:429
Chain[J8] Aisc[30] original freq=637 adjusted freq:429
Chain[J8] Aisc[31] original freq=637 adjusted freq:429
Chain[J8] Aisc[32] original freq=637 adjusted freq:429
Chain[J8] Aisc[33] original freq=637 adjusted freq:429
Chain[J8] Aisc[34] original freq=637 adjusted freq:429
Chain[J8] Aisc[35] original freq=637 adjusted freq:429
Chain[J8] Aisc[36] original freq=637 adjusted freq:429
Chain[J8] Aisc[37] original freq=637 adjusted freq:429
Chain[J8] Aisc[38] original freq=637 adjusted freq:429
Chain[J8] Aisc[39] original freq=637 adjusted freq:429
Chain[J8] Aisc[40] original freq=637 adjusted freq:429
Chain[J8] Aisc[41] original freq=637 adjusted freq:429
Chain[J8] Aisc[42] original freq=637 adjusted freq:429
Chain[J8] Aisc[43] original freq=637 adjusted freq:429
Chain[J8] Aisc[44] original freq=637 adjusted freq:429
Chain[J8] Aisc[45] original freq=637 adjusted freq:429
Chain[J8] Aisc[46] original freq=637 adjusted freq:429
Chain[J8] Aisc[47] original freq=637 adjusted freq:429
Chain[J8] Aisc[48] original freq=637 adjusted freq:429
Chain[J8] Aisc[49] original freq=637 adjusted freq:429
Chain[J8] Aisc[50] original freq=637 adjusted freq:429
Chain[J8] Aisc[51] original freq=637 adjusted freq:429
Chain[J8] Aisc[52] original freq=637 adjusted freq:429
Chain[J8] Aisc[53] original freq=637 adjusted freq:429
Chain[J8] Aisc[54] original freq=637 adjusted freq:429
Chain[J8] Aisc[55] original freq=637 adjusted freq:429
Chain[J8] Aisc[56] original freq=637 adjusted freq:429
Chain[J8] Aisc[57] original freq=637 adjusted freq:429
Chain[J8] Aisc[58] original freq=637 adjusted freq:429
Chain[J8] Aisc[59] original freq=637 adjusted freq:429
Chain[J8] Aisc[60] original freq=637 adjusted freq:429
Chain[J8] Aisc[61] original freq=637 adjusted freq:429
Chain[J8] Aisc[62] original freq=637 adjusted freq:429
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[0] has core num=1
Chain[J6] ASIC[1] has core num=1
Chain[J6] ASIC[2] has core num=1
Chain[J6] ASIC[3] has core num=1
Chain[J6] ASIC[4] has core num=1
Chain[J6] ASIC[5] has core num=1
Chain[J6] ASIC[6] has core num=1
Chain[J6] ASIC[7] has core num=1
Chain[J6] ASIC[8] has core num=1
Chain[J6] ASIC[9] has core num=1
Chain[J6] ASIC[10] has core num=1
Chain[J6] ASIC[11] has core num=12
Chain[J6] ASIC[12] has core num=1
Chain[J6] ASIC[13] has core num=1
Chain[J6] ASIC[14] has core num=1
Chain[J6] ASIC[15] has core num=2
Chain[J6] ASIC[16] has core num=6
Chain[J6] ASIC[17] has core num=1
Chain[J6] ASIC[19] has core num=15
Chain[J6] ASIC[20] has core num=1
Chain[J6] ASIC[21] has core num=4
Chain[J6] ASIC[22] has core num=1
Chain[J6] ASIC[23] has core num=2
Chain[J6] ASIC[24] has core num=4
Chain[J6] ASIC[25] has core num=1
Chain[J6] ASIC[26] has core num=3
Chain[J6] ASIC[27] has core num=1
Chain[J6] ASIC[28] has core num=1
Chain[J6] ASIC[30] has core num=1
Chain[J6] ASIC[31] has core num=1
Chain[J6] ASIC[32] has core num=2
Chain[J6] ASIC[33] has core num=1
Chain[J6] ASIC[34] has core num=2
Chain[J6] ASIC[35] has core num=1
Chain[J6] ASIC[37] has core num=1
Chain[J6] ASIC[38] has core num=1
Chain[J6] ASIC[39] has core num=3
Chain[J6] ASIC[40] has core num=1
Chain[J6] ASIC[41] has core num=2
Chain[J6] ASIC[42] has core num=2
Chain[J6] ASIC[43] has core num=3
Chain[J6] ASIC[44] has core num=3
Chain[J6] ASIC[45] has core num=3
Chain[J6] ASIC[46] has core num=1
Chain[J6] ASIC[47] has core num=1
Chain[J6] ASIC[48] has core num=1
Chain[J6] ASIC[49] has core num=1
Chain[J6] ASIC[50] has core num=1
Chain[J6] ASIC[51] has core num=1
Chain[J6] ASIC[52] has core num=1
Chain[J6] ASIC[53] has core num=4
Chain[J6] ASIC[54] has core num=2
Chain[J6] ASIC[55] has core num=1
Chain[J6] ASIC[57] has core num=1
Chain[J6] ASIC[58] has core num=1
Chain[J6] ASIC[59] has core num=2
Chain[J6] ASIC[60] has core num=1
Chain[J6] ASIC[61] has core num=1
Chain[J6] ASIC[62] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[5] has core num=7
Chain[J7] ASIC[16] has core num=15
Chain[J7] ASIC[43] has core num=15
Chain[J8] has core num in PIC
Chain[J8] ASIC[0] has core num=1
Chain[J8] ASIC[1] has core num=1
Chain[J8] ASIC[2] has core num=1
Chain[J8] ASIC[3] has core num=1
Chain[J8] ASIC[4] has core num=1
Chain[J8] ASIC[5] has core num=2
Chain[J8] ASIC[6] has core num=1
Chain[J8] ASIC[7] has core num=1
Chain[J8] ASIC[8] has core num=1
Chain[J8] ASIC[9] has core num=1
Chain[J8] ASIC[10] has core num=1
Chain[J8] ASIC[11] has core num=1
Chain[J8] ASIC[12] has core num=2
Chain[J8] ASIC[13] has core num=1
Chain[J8] ASIC[14] has core num=1
Chain[J8] ASIC[15] has core num=3
Chain[J8] ASIC[16] has core num=1
Chain[J8] ASIC[17] has core num=1
Chain[J8] ASIC[18] has core num=1
Chain[J8] ASIC[19] has core num=1
Chain[J8] ASIC[20] has core num=2
Chain[J8] ASIC[21] has core num=1
Chain[J8] ASIC[22] has core num=1
Chain[J8] ASIC[23] has core num=1
Chain[J8] ASIC[24] has core num=1
Chain[J8] ASIC[25] has core num=1
Chain[J8] ASIC[26] has core num=1
Chain[J8] ASIC[27] has core num=1
Chain[J8] ASIC[29] has core num=1
Chain[J8] ASIC[30] has core num=1
Chain[J8] ASIC[31] has core num=1
Chain[J8] ASIC[32] has core num=2
Chain[J8] ASIC[33] has core num=2
Chain[J8] ASIC[34] has core num=1
Chain[J8] ASIC[35] has core num=1
Chain[J8] ASIC[36] has core num=1
Chain[J8] ASIC[37] has core num=1
Chain[J8] ASIC[38] has core num=1
Chain[J8] ASIC[40] has core num=1
Chain[J8] ASIC[41] has core num=1
Chain[J8] ASIC[42] has core num=7
Chain[J8] ASIC[43] has core num=1
Chain[J8] ASIC[44] has core num=1
Chain[J8] ASIC[45] has core num=3
Chain[J8] ASIC[46] has core num=1
Chain[J8] ASIC[47] has core num=1
Chain[J8] ASIC[49] has core num=1
Chain[J8] ASIC[50] has core num=1
Chain[J8] ASIC[51] has core num=1
Chain[J8] ASIC[52] has core num=1
Chain[J8] ASIC[53] has core num=2
Chain[J8] ASIC[54] has core num=1
Chain[J8] ASIC[55] has core num=1
Chain[J8] ASIC[56] has core num=1
Chain[J8] ASIC[57] has core num=1
Chain[J8] ASIC[58] has core num=1
Chain[J8] ASIC[59] has core num=1
Chain[J8] ASIC[60] has core num=1
Chain[J8] ASIC[61] has core num=1
Chain[J8] ASIC[62] has core num=2
miner total rate=9434GH/s ideal_total_hash_rate = 9000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=-70
Chain:5 base freq=656
Asic[ 0]:450 Asic[ 1]:450 Asic[ 2]:450 Asic[ 3]:450 Asic[ 4]:450 Asic[ 5]:450 Asic[ 6]:450 Asic[ 7]:450 
Asic[ 8]:450 Asic[ 9]:450 Asic[10]:450 Asic[11]:450 Asic[12]:450 Asic[13]:450 Asic[14]:450 Asic[15]:450 
Asic[16]:450 Asic[17]:450 Asic[18]:450 Asic[19]:450 Asic[20]:450 Asic[21]:450 Asic[22]:450 Asic[23]:450 
Asic[24]:450 Asic[25]:450 Asic[26]:450 Asic[27]:450 Asic[28]:450 Asic[29]:450 Asic[30]:450 Asic[31]:450 
Asic[32]:450 Asic[33]:450 Asic[34]:450 Asic[35]:450 Asic[36]:450 Asic[37]:450 Asic[38]:450 Asic[39]:450 
Asic[40]:450 Asic[41]:450 Asic[42]:450 Asic[43]:450 Asic[44]:450 Asic[45]:450 Asic[46]:450 Asic[47]:450 
Asic[48]:450 Asic[49]:450 Asic[50]:450 Asic[51]:450 Asic[52]:450 Asic[53]:450 Asic[54]:450 Asic[55]:450 
Asic[56]:450 Asic[57]:450 Asic[58]:450 Asic[59]:450 Asic[60]:450 Asic[61]:450 Asic[62]:450 
Chain:5 max freq=450
Chain:5 min freq=450

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=-85
Chain:6 base freq=675
Asic[ 0]:468 Asic[ 1]:468 Asic[ 2]:468 Asic[ 3]:468 Asic[ 4]:468 Asic[ 5]:468 Asic[ 6]:468 Asic[ 7]:468 
Asic[ 8]:468 Asic[ 9]:468 Asic[10]:468 Asic[11]:468 Asic[12]:468 Asic[13]:468 Asic[14]:468 Asic[15]:468 
Asic[16]:468 Asic[17]:468 Asic[18]:468 Asic[19]:468 Asic[20]:468 Asic[21]:468 Asic[22]:468 Asic[23]:468 
Asic[24]:468 Asic[25]:468 Asic[26]:468 Asic[27]:468 Asic[28]:468 Asic[29]:468 Asic[30]:468 Asic[31]:468 
Asic[32]:468 Asic[33]:468 Asic[34]:468 Asic[35]:468 Asic[36]:468 Asic[37]:468 Asic[38]:468 Asic[39]:468 
Asic[40]:468 Asic[41]:468 Asic[42]:468 Asic[43]:468 Asic[44]:468 Asic[45]:468 Asic[46]:468 Asic[47]:468 
Asic[48]:468 Asic[49]:468 Asic[50]:468 Asic[51]:468 Asic[52]:468 Asic[53]:468 Asic[54]:468 Asic[55]:468 
Asic[56]:468 Asic[57]:468 Asic[58]:468 Asic[59]:468 Asic[60]:468 Asic[61]:468 Asic[62]:468 
Chain:6 max freq=468
Chain:6 min freq=468

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-80
Chain:7 base freq=637
Asic[ 0]:429 Asic[ 1]:429 Asic[ 2]:429 Asic[ 3]:429 Asic[ 4]:429 Asic[ 5]:429 Asic[ 6]:429 Asic[ 7]:429 
Asic[ 8]:429 Asic[ 9]:429 Asic[10]:429 Asic[11]:429 Asic[12]:429 Asic[13]:429 Asic[14]:429 Asic[15]:429 
Asic[16]:429 Asic[17]:429 Asic[18]:429 Asic[19]:429 Asic[20]:429 Asic[21]:429 Asic[22]:429 Asic[23]:429 
Asic[24]:429 Asic[25]:429 Asic[26]:429 Asic[27]:429 Asic[28]:429 Asic[29]:429 Asic[30]:429 Asic[31]:429 
Asic[32]:429 Asic[33]:429 Asic[34]:429 Asic[35]:429 Asic[36]:429 Asic[37]:429 Asic[38]:429 Asic[39]:429 
Asic[40]:429 Asic[41]:429 Asic[42]:429 Asic[43]:429 Asic[44]:429 Asic[45]:429 Asic[46]:429 Asic[47]:429 
Asic[48]:429 Asic[49]:429 Asic[50]:429 Asic[51]:429 Asic[52]:429 Asic[53]:429 Asic[54]:429 Asic[55]:429 
Asic[56]:429 Asic[57]:429 Asic[58]:429 Asic[59]:429 Asic[60]:429 Asic[61]:429 Asic[62]:429 
Chain:7 max freq=429
Chain:7 min freq=429


Miner fix freq ...
totalRate = 9434, fixed_totalRate = 9090
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=-70
Chain:5 base freq=656
Asic[ 0]:450 Asic[ 1]:450 Asic[ 2]:450 Asic[ 3]:450 Asic[ 4]:450 Asic[ 5]:450 Asic[ 6]:450 Asic[ 7]:450 
Asic[ 8]:450 Asic[ 9]:450 Asic[10]:450 Asic[11]:450 Asic[12]:450 Asic[13]:450 Asic[14]:450 Asic[15]:450 
Asic[16]:450 Asic[17]:450 Asic[18]:450 Asic[19]:450 Asic[20]:450 Asic[21]:450 Asic[22]:450 Asic[23]:450 
Asic[24]:450 Asic[25]:450 Asic[26]:450 Asic[27]:450 Asic[28]:450 Asic[29]:450 Asic[30]:450 Asic[31]:450 
Asic[32]:450 Asic[33]:450 Asic[34]:450 Asic[35]:450 Asic[36]:450 Asic[37]:450 Asic[38]:450 Asic[39]:450 
Asic[40]:450 Asic[41]:450 Asic[42]:450 Asic[43]:450 Asic[44]:450 Asic[45]:450 Asic[46]:450 Asic[47]:450 
Asic[48]:450 Asic[49]:450 Asic[50]:450 Asic[51]:450 Asic[52]:450 Asic[53]:450 Asic[54]:450 Asic[55]:450 
Asic[56]:450 Asic[57]:450 Asic[58]:450 Asic[59]:450 Asic[60]:450 Asic[61]:450 Asic[62]:450 
Chain:5 max freq=450
Chain:5 min freq=450

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=-85
Chain:6 base freq=675
Asic[ 0]:468 Asic[ 1]:468 Asic[ 2]:468 Asic[ 3]:468 Asic[ 4]:468 Asic[ 5]:468 Asic[ 6]:468 Asic[ 7]:468 
Asic[ 8]:468 Asic[ 9]:468 Asic[10]:468 Asic[11]:468 Asic[12]:468 Asic[13]:468 Asic[14]:468 Asic[15]:468 
Asic[16]:468 Asic[17]:468 Asic[18]:468 Asic[19]:468 Asic[20]:468 Asic[21]:468 Asic[22]:468 Asic[23]:468 
Asic[24]:468 Asic[25]:468 Asic[26]:468 Asic[27]:468 Asic[28]:468 Asic[29]:468 Asic[30]:468 Asic[31]:468 
Asic[32]:468 Asic[33]:468 Asic[34]:468 Asic[35]:468 Asic[36]:468 Asic[37]:468 Asic[38]:468 Asic[39]:468 
Asic[40]:468 Asic[41]:468 Asic[42]:468 Asic[43]:468 Asic[44]:468 Asic[45]:468 Asic[46]:468 Asic[47]:468 
Asic[48]:468 Asic[49]:468 Asic[50]:468 Asic[51]:468 Asic[52]:468 Asic[53]:468 Asic[54]:468 Asic[55]:468 
Asic[56]:468 Asic[57]:468 Asic[58]:468 Asic[59]:468 Asic[60]:468 Asic[61]:468 Asic[62]:468 
Chain:6 max freq=468
Chain:6 min freq=468

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-80
Chain:7 base freq=637
Asic[ 0]:429 Asic[ 1]:429 Asic[ 2]:429 Asic[ 3]:429 Asic[ 4]:429 Asic[ 5]:429 Asic[ 6]:429 Asic[ 7]:429 
Asic[ 8]:429 Asic[ 9]:429 Asic[10]:429 Asic[11]:429 Asic[12]:429 Asic[13]:429 Asic[14]:429 Asic[15]:429 
Asic[16]:429 Asic[17]:429 Asic[18]:429 Asic[19]:429 Asic[20]:429 Asic[21]:429 Asic[22]:429 Asic[23]:429 
Asic[24]:429 Asic[25]:429 Asic[26]:429 Asic[27]:429 Asic[28]:429 Asic[29]:429 Asic[30]:429 Asic[31]:429 
Asic[32]:429 Asic[33]:429 Asic[34]:429 Asic[35]:429 Asic[36]:429 Asic[37]:429 Asic[38]:429 Asic[39]:429 
Asic[40]:429 Asic[41]:429 Asic[42]:429 Asic[43]:429 Asic[44]:429 Asic[45]:429 Asic[46]:429 Asic[47]:429 
Asic[48]:429 Asic[49]:429 Asic[50]:429 Asic[51]:429 Asic[52]:429 Asic[53]:429 Asic[54]:429 Asic[55]:429 
Asic[56]:429 Asic[57]:429 Asic[58]:429 Asic[59]:429 Asic[60]:429 Asic[61]:429 Asic[62]:429 
Chain:7 max freq=429
Chain:7 min freq=429

max freq = 468
totalRate = 9434, fixed_totalRate = 9000
set baud=1
Chain[J6] PIC temp offset: 62,-70,0,0,0,0,33,0,0,0,0,0,0,0,0,0,0,0,
chain[6] temp chip I2C addr=0x98
Chain[J6] chip[244] use PIC middle temp offset=-70 typeID=1a
Warning: Chain[5] chip[244] local:43 remote:107 offset:-32, will fixed offset=27
New offset Chain[6] chip[244] local:43 remote:107 offset:27 
Chain[J6] chip[244] get middle temp offset=27 typeID=1a
Chain[J7] PIC temp offset: 62,-85,0,0,0,0,33,0,0,0,0,0,0,0,0,0,0,0,
chain[7] temp chip I2C addr=0x98
Chain[J7] chip[244] use PIC middle temp offset=-85 typeID=1a
Warning: Chain[6] chip[244] local:42 remote:122 offset:-48, will fixed offset=27
New offset Chain[7] chip[244] local:42 remote:122 offset:27 
Chain[J7] chip[244] get middle temp offset=27 typeID=1a
Chain[J8] PIC temp offset: 62,-80,0,0,0,0,33,0,0,0,0,0,0,0,0,0,0,0,
chain[8] temp chip I2C addr=0x98
Chain[J8] chip[244] use PIC middle temp offset=-80 typeID=1a
Warning: Chain[7] chip[244] local:43 remote:114 offset:-39, will fixed offset=27
New offset Chain[8] chip[244] local:43 remote:114 offset:27 
Chain[J8] chip[244] get middle temp offset=27 typeID=1a
single board rate=3135 voltage limit=940 on chain[5]
get PIC voltage=830 on chain[5], check: must be < 940
single board rate=3251 voltage limit=940 on chain[6]
get PIC voltage=830 on chain[6], check: must be < 940
single board rate=3048 voltage limit=940 on chain[7]
get PIC voltage=830 on chain[7], check: must be < 940
setting to working voltage...
chain[5] set voltage to 930
chain[6] set voltage to 930
chain[7] set voltage to 930
chain[5] set voltage to 920
chain[6] set voltage to 920
chain[7] set voltage to 920
chain[5] set voltage to 910
chain[6] set voltage to 910
chain[7] set voltage to 910
chain[5] set voltage to 900
chain[6] set voltage to 900
chain[7] set voltage to 900
chain[5] set voltage to 890
chain[6] set voltage to 890
chain[7] set voltage to 890
chain[5] set voltage to 880
chain[6] set voltage to 880
chain[7] set voltage to 880
chain[5] set voltage to 870
chain[6] set voltage to 870
chain[7] set voltage to 870
chain[5] set voltage to 860
chain[6] set voltage to 860
chain[7] set voltage to 860
chain[5] set voltage to 850
chain[6] set voltage to 850
chain[7] set voltage to 850
chain[5] set voltage to 840
chain[6] set voltage to 840
chain[7] set voltage to 840
chain[5] set voltage to 830
chain[6] set voltage to 830
chain[7] set voltage to 830
start thread for read temp
setStartTimePoint total_tv_start_sys=10658 total_tv_end_sys=10659
restartNum = 2 , auto-reinit enabled...
mining.subscribe:{"id": 0, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9/13500"]}
bring_up_pcb_temp = 59
setting to working voltage...
voltage_check_done
avg hash rate = 9464.960125, ideal hash rate = 9000
hash rate is ok now
do read_temp_func once...

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=51.5060 Asic[02]=55.2800 Asic[03]=47.8480 Asic[04]=49.4760 Asic[05]=55.3310 Asic[06]=55.9520 Asic[07]=53.8380 Asic[08]=48.0660 
Asic[09]=56.4050 Asic[10]=48.8720 Asic[11]=56.3540 Asic[12]=50.4150 Asic[13]=47.0600 Asic[14]=48.2170 Asic[15]=52.5120 Asic[16]=54.9110 
Asic[17]=48.3850 Asic[18]=52.1100 Asic[19]=52.9150 Asic[20]=48.8550 Asic[21]=48.9890 Asic[22]=48.5530 Asic[23]=49.8610 Asic[24]=53.6190 
Asic[25]=51.8750 Asic[26]=50.5660 Asic[27]=47.0930 Asic[28]=53.9380 Asic[29]=48.0160 Asic[30]=49.4080 Asic[31]=49.8450 Asic[32]=46.8080 
Asic[33]=47.2110 Asic[34]=56.6730 Asic[35]=47.8310 Asic[36]=50.3650 Asic[37]=49.4420 Asic[38]=50.1970 Asic[39]=48.1500 Asic[40]=47.2270 
Asic[41]=52.0930 Asic[42]=52.0260 Asic[43]=53.7870 Asic[44]=49.8450 Asic[45]=59.7260 Asic[46]=48.1670 Asic[47]=53.5860 Asic[48]=48.8880 
Asic[49]=50.2980 Asic[50]=49.2740 Asic[51]=56.2030 Asic[52]=53.5690 Asic[53]=48.9720 Asic[54]=46.3210 Asic[55]=51.8410 Asic[56]=51.9420 
Asic[57]=53.3170 Asic[58]=51.9590 Asic[59]=51.7910 Asic[60]=53.9210 Asic[61]=49.7440 Asic[62]=52.3440 Asic[63]=55.0290 

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=51.0190 Asic[02]=52.6130 Asic[03]=56.2030 Asic[04]=57.9480 Asic[05]=49.7100 Asic[06]=51.4380 Asic[07]=50.7840 Asic[08]=50.4490 
Asic[09]=52.3110 Asic[10]=51.6060 Asic[11]=52.5290 Asic[12]=54.4580 Asic[13]=55.5150 Asic[14]=60.8170 Asic[15]=55.0290 Asic[16]=51.0860 
Asic[17]=49.1570 Asic[18]=55.1460 Asic[19]=56.3370 Asic[20]=55.2800 Asic[21]=53.8540 Asic[22]=53.9050 Asic[23]=51.3040 Asic[24]=56.3040 
Asic[25]=49.5760 Asic[26]=57.3100 Asic[27]=53.3680 Asic[28]=53.7370 Asic[29]=53.2500 Asic[30]=54.8440 Asic[31]=53.4350 Asic[32]=53.8880 
Asic[33]=56.1360 Asic[34]=53.8380 Asic[35]=52.6800 Asic[36]=53.1660 Asic[37]=55.4480 Asic[38]=50.5830 Asic[39]=51.1200 Asic[40]=54.3740 
Asic[41]=48.4860 Asic[42]=53.2840 Asic[43]=45.9190 Asic[44]=49.8450 Asic[45]=48.5190 Asic[46]=53.9720 Asic[47]=51.7910 Asic[48]=50.1800 
Asic[49]=55.7840 Asic[50]=46.4890 Asic[51]=51.9920 Asic[52]=55.3140 Asic[53]=55.5320 Asic[54]=53.0660 Asic[55]=52.0930 Asic[56]=52.2770 
Asic[57]=52.0260 Asic[58]=51.1200 Asic[59]=53.2170 Asic[60]=54.9450 Asic[61]=56.7230 Asic[62]=51.2540 Asic[63]=49.5260 

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
Chain[5] Chip[244] pcb temperature=60
Chain[5] Chip[62] junction temperature=128
Special fix Chain[5] Chip[62] middle Temp = 75
Done read temp on Chain[5]
Chain[6] Chip[244] pcb temperature=56
Chain[6] Chip[62] junction temperature=136
Special fix Chain[6] Chip[62] middle Temp = 71
Done read temp on Chain[6]
read failed on Chain[7] Chip[62] middle Temp old value:75
Special fix Chain[7] Chip[62] middle Temp = 75
Done read temp on Chain[7]
Max pcb temp : 60
Read temp failed, set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=1
15  Bitcoin / Mining support / Re: What is the difference between BM1387-BM1387B-BM1387BL? on: August 06, 2019, 07:12:32 PM
I have contacted plenty of sellers and none of them has given a consistent reply. So far they mostly say BM1387 and BM1387B are compatible and BM1387BL is for Hydro model
16  Bitcoin / Mining support / Re: What is the difference between BM1387-BM1387B-BM1387BL? on: August 05, 2019, 01:59:11 PM
Oh I totally forgot about it. About the readings on Kernel I have to say it was accurate enough. On one board it was the exactly same number which was failing, on the other board it was the next chip. I found the failing chips by first checking Log(It says how many ASIC found) then measure the voltage values with multimeter around that chip.(Chips itself and -3 +3 other chips.) I managed to get one hashboard fixed correctly, the other one gave different error which I think I heated up a lot and made some other chip's solder paste contact loss.
17  Bitcoin / Mining support / What is the difference between BM1387-BM1387B-BM1387BL? on: August 04, 2019, 03:46:37 PM
Hello, I have been into learning how to repair missing chips and hashboard errors and I realised that there are 3 types of chips for Antminer S9 and It would be great if anyone can tell the difference since I really failed to find on the internet. My concern about that if I replace a chip in my S9 hashboard, would it make difference whether I use BM1387 or BM1387B ?
18  Local / Servisler / Re: BTCTurk BTC Yatırma Gecikmesi - ÇÖZÜLDÜ on: July 31, 2019, 11:08:10 AM
Double post olacak ama kendileri benimle iletişime geçip sorunun çözüldüğünü söylediler, umarım öyledir. Canlı Desteğin de kullanıcıları magdur etmemek adına böyle hızlı aksiyon alacak şekilde güncellenmesini umuyorum.
19  Local / Servisler / Re: Btcturk Rezilliği ve Borsa Önerisi Lütfen on: July 31, 2019, 09:55:53 AM
Quote from: onurgozupek on July 31, 2019, 06:37:00 AM
Quote from: eotrix on July 30, 2019, 01:50:21 PM
Uzun bir süredir BTCTURK ile çalışmaktayım fakat son 2 haftadır BTC yatırma işlemlerimin hiçbiri sistem tarafından hesabıma yansımadı. Her seferinde özellikle destekle konusup birkaç gün gecikmeli olarak aldım BTClerimi. Bunlar işi bozdu, belli ki kullanıcılar takip etmese unutsa kendi cüzdanlarında kalıcak, yatıcaklar paraya. Hergün hergün kimse özellikle login olup da desteğe de yazmak zorunda değil. Tam bir fiyasko, rezillik. Durum böyle olunca öncelikle bu siteden uzak durmanızı tavsiye eder ve güvenilir, TL çekimleri aynı gün ve BTC yatırım işlemleri aynı gün yapabildiğimiz bir site var mıdır arkadaşlar?

Merhaba, BtcTurk'e ulaşabileceğiniz bir sürü kanal var. Canlı sohbet bunlardan sadece biri. Üye girişi yapmadan da destek@btcturk.com adresine e-posta göndererek destek alabilirsiniz.

Destek ekibi, problem yaşadığınızda çözüm bulmak, sorunuz olduğunda cevap vermek için var. Üstelik 7/24 hizmet alabiliyorsunuz. Bunu gözardı etmeyin.

Bitcoin transferiniz geç onay almış ya da uzun süre onay almamış olabilir. "Onay aldı ama hesabıma geçmedi" durumu söz konusu değil. Bitcoin transferlerinde gecikme yaşanması olağan bir durum. Bunu, böyle bir başlıkla paylaşmanız biraz haksızlık değil mi?
Öncelikle canlı destğe bakın özellikle belirtiyorum 15 "GÜN" boyunca yazdım ve artık bu durumdan sıkıldıgımı, çözüm bulmaları gerektiğini ilettim. Bir şey bir defa yaşanırsa sorun yok, iki belki 3 hatta 5 bile okeydir benim için. Fakat 15 gündür(hergün BTC yatırıyorum) BTClerimi alabilmek için canlı desteğe yazıp 1-2 gün gecikmeli olarak almak çok da güven veren bir durum değil. Yani onlara ulaşabileğiniz bir sürü kanal var bunları göz ardı etmeyin diye birşey bilmeden kesin yargıda bulunmayalım. Ulasıp 2 hafta boyunca sorunu bildirmeme ragmen HERGÜN, değişen birşey yoksa ben burada güvensizlik ve kalitesizlik sezerim.

Bir kullanıcı bir sorun belirtiyorsa bu sorun 15 gün boyunca devam etmemeli. Haksızlık dediğiniz noktada bir gülme tuttu beni.

"Onay aldı ama hesabıma geçmedi" durumu söz konusu değil demişsiniz; ben rüya mı görüyorum 2 haftadır sayın kullanıcı? Normalde 2-5 onayda hesaba aktarım yapıyor bütün borsalar ve benim işlemlerim 90 onay almasına üzerinden 48 saat geçmesine ragmen hala hesabımda yok. Üstelik 15 gündür her gün bu şekilde. Haksızlık benim yaptıgım değil, bana yapılan kimse kusura bakmasın.

Quote from: mandown on July 30, 2019, 02:05:03 PM
ben pek bir rezillik görmedim sizde bir sorun olmuş sonuçta paranızı geri yatırmışlar

firmayı kullanmıyorum ben koinimi kullanıyorum sorsan koinimde kötü ama sorun hiç mi hiç yaşamadım. ufak tefek oldu ama o kadar da olur.
15 gündür bu şekilde ve hala devam etmekte. Tek seferlik birşey olsa ben de sorun olmustur ama çözdüler derdim. Desteğe iletmeme rağmen 15 gündür devam ediyorsa ciddi bir problem vardır, değil mi?
20  Local / Servisler / BTCTurk BTC Yatırma Gecikmesi - ÇÖZÜLDÜ on: July 30, 2019, 01:50:21 PM
Uzun bir süredir BTCTURK ile çalışmaktayım fakat son 2 haftadır BTC yatırma işlemlerimin hiçbiri sistem tarafından hesabıma yansımadı. Her seferinde özellikle destekle konusup birkaç gün gecikmeli olarak aldım BTClerimi. Hergün hergün kimse özellikle login olup da desteğe de yazmak zorunda değil. Yine de 15 gün kadar bu şekilde gitti ve çözüm olmadı.

EDIT: Post üzerine benimle iletişime geçip, çözümün sağlandığını söylediler.
Pages: [1] 2 3
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!