Show Posts
|
Pages: [1] 2 3 »
|
send, have fun with your coins
|
|
|
Dead coin, I give 15236 PCC to the first one replying with a valid pcc address. Mined it at mining-dutch but it is worthless coin.
|
|
|
so the bsod-BWK split is the new true BWK chain?
Why the official explorers are pointing to wrong chain?
|
|
|
my payment still stuck after 11+ hours (processing...)
I can give some recommendations to the pool (after 24 hours waiting for getting payment in wallet) - reset the payment progress bar only when a real payment is done (tx id is available at least) - do not 'process' a payment longer than 1 hour (took 10 hours) - in case changing from process to 'sent', please make sure the transaction id can be visible ( it was not for some hours) Slushpool is reliable but payment took some time in current congested conditions.
|
|
|
Come join us at Kano's pool. We could use the hashpower! M Also still waiting for days for payment from Kano.Edit: Finally received as unconfirmed in wallet
|
|
|
after 13 hours changed from processed to 'Sent' but the specified transaction id does not exist in blockchain ??
Not paid yet..
Finally done, even confirmed in wallet.
|
|
|
ha! it did work, went out instantly...! i suppose one has to 'tickle' the pool once in a while... thanks a lot!! Hmm. That trick did not work for me. I guess it is delayed because slush can not move our payout money from cold to hot storage for a descent fee due to extreme congestion. (Because following remark is on their help page:) Delay in Payout. For security reason pool uses two wallets – Hot and Cold.
The funds immediately available for payouts are kept in a Hot wallet. This wallet has quite a low balance for security reasons and when it becomes empty, the pool administrator has to load it from the cold storage – a highly secured offline computer keeping pool's bitcoins. Since this process can not be automated and only very limited number of people has access to the cold wallet, it can introduce a few hours delay in sending bitcoins to user's wallet.
|
|
|
Have 3xS9 running since 10.12. Now I got only 0.01226437 BTC as Reward. Why so less???
I forgot something?
In case the pool was lucky, we could have about 3 blocks in the same time period instead of 1. (thus 3 times this profit)
|
|
|
Maybe I'm missing something but when I check here it looks like difficulty is going to drop. Either way difficulty is going to swing up and down, with a fairly steady trend upwards which has been more than matched in price. https://bitcoinwisdom.com/bitcoin/difficultyI don't normally track this because I've come to accept there's nothing I can do. For opinion sake, which one do people tend to trust? That site has some major problems some months already, showing incorrect estimations. You better check https://fork.lol/pow/retarget
|
|
|
I switched to another pool when kanopool had about 100% busy finding a block (sorry).
Is it correct that I do not get paid for these contributions when the pool reaches 600% and still no block found?
|
|
|
New guy here. I really want to join Kano but I’m not too sure about a couple things. Wondering if someone here could help me. First, I have a single antminer S9. The firmware on it seems to work well with antpool, but not work well on slush. Slush requires cgminer and I could not figure out how to update my S9 to cgminer fw. So for now I’m on antpool because it clearly shows me that everything is working.
I joined Kano for about 20 min earlier tonight and I didn’t know what to look for to make sure everything was working correctly. My anminer showed a rejected count at one point. So can someone first tell me if my S9 with default firmware from bitmain will work on Kano? And then what do I look for to make sure my miner is contributing properly once I mine to Kano? Is it worth mining to Kano with a single S9?
Thanks in advance!
S9 firmware is fine, you can join any pool with sha256 algorithm without firmware update.
|
|
|
Many of us buy only from the mfrs direct, or from endorsed, official distributors
Would BITMAIN pre-sell one version and then ship a different one? This is what Eastshore is claiming why they have the different version to ship in the first place. FWIW, the 2 S9's I ordered for Dec 11-20th batch show Antminer S9-14TH/s in the order status. Granted that doesn't mean anything since I think they claim +/- 5%. This is my first Bitmain order. I ordered 4 S9 14TH from Bitmain. All of them had the nomenclature showing 14th/s however one has never, ever, ever hashed above 13.7TH/s. The other 3 are within specs. Of note, the configuration in the one that does not hash to the advertised TH/s is the hottest running machine and the Freq for each hashing board are lower than the 14th/s ones. Hope this helps. My S9 from late november batch is labeled as 13.5 but it always mining around 14.0 Th . The autotune freq colum 'ídeal' shows it tries to get 13.5 Th but it does not succeed and get constant average value of 14.0 Th , same every reboot. Downside of this extra TH is that the antminer takes 1500 watt instead of my older S9 that only consumes 1400 watt. I would like to underclock a little.
|
|
|
hi,
can anyone confirm weather the payments for the last 2 blocks have already been sent or weather they are still pending? the website shows them as sent, but i cannot find them, for some reason...
thanks!
The pool has to find another block which will include the payment transaction. But we found 2 so shouldn't the first one be sent to our wallets already and then the second one we found be sent at the next block we find? No, because the 2 finds were to close in time. First find was not yet 'matured' before next block was found.
|
|
|
Hello Dancers ! My first S9 will arrive tomorrow... Here in good old Germany the electricity coasts are very expensive. My House is from 1904 the power lines are the same age. I hope I will not burn down my house, all I can say is: MINE ON! I have a similar situation. I just had an electrician friend install two 20 amp circuits to two separate outlets specifically for my miners. It was a few hundred bux, I think (still haven't gotten the bill). It took a couple of his guys a couple hours. So, its more than worth it for the peace of mind. Today my main breaker circuit in my house was melted, four days after installing 3 antminers secured after a 16 amp breaker (1 pointed to kano, 1 to slush, 1 to mining-dutch) . No lights in house, it took two hours before the called mechanic from the electricity company installed a new main fuse, the old broken one of 25 amp was replaced by a heavier 35 amp. Problem is here in the Netherlands you can not see or look yourself at the main breaker fuse, so I assumed it was already 35 amp, the current standard. Wrong guess, old house, old main fuse. Will cost me 2 days mining to pay him.
|
|
|
I cant look at my dashboard. 502 Bad Gateway
|
|
|
Received 1 december my new L3+ and PSU within 5 days from China to Netherlands (30 nov batch). Had to pay 400 euro customs/tax cash to UPS. As expected, no complaints.
Received 4 december my new S9 and PSU within 5 days from China to Netherlands (30 nov batch). Had to pay 300 euro customs/tax cash to UPS. As expected, no complaints.
So I had no problems with UPS, except they had no change at the door so the courier kept about 8 euro change. Next time I will chose UPS again.
|
|
|
Last 3 weeks my daily reward fluctuates between 0.0024 - 0.0034 BTC a day using my S9. Average about 0.0026. But todays luck is @#$$$% with 55% last 10 blocks.
|
|
|
what is the current herp /derp /lns needed to get in the top 100 for the next block?
|
|
|
I have a S9 and a L3+ ordered, both seperate Nov. 21-30 batch orders. Thought I was early in the order queue. But both have status not shipped..
|
|
|
when I look at https://btc.com/ (all the time) to see if kanopool or slushpool did find a block -my personal favorites-, I noticed that it happens very often that when a pool finds a block, a second block is found by the same pool within a short time. How can this be explained? I don't believe it is fully explainable by 'luck' because it happens quite often, by all pools.
|
|
|
|