Latest posts of: Coinagect

Show Posts
Pages: [1]

on: April 14, 2014, 02:45:29 PM

Quote from: pepo on March 28, 2014, 06:33:43 AM Quote from: Coinagect on March 25, 2014, 02:26:32 PM Things were humming along, then rig stopped working with the: [Firmware Version] => 20140324 cgminer: 698d677 cgminer-openwrt-packages: aadd747+ luci: 346e3e7+ Socket connect failed: Connection refused Errors, after reboot connects for a moment but never hashing all discarded. Then error returns and cgminer process ends. Tried diff IPs, updating firmware (currently on 20140324), diff pools, etc. Ping/tracrt/nslookup all working. Where to go from here? If you get it running again, I'll point to your acct for the rest of the day. Hello , i had the same problem , it says 0.0mhs . It is the power supply , you got to trust me and change it, the fans dont work right? Fans were working properly, after PS swap the boards started hashing again.

on: March 25, 2014, 07:37:21 PM

Quote from: holders on March 25, 2014, 05:56:05 PM to: Coinagect - Return old software, and reinstall new. to: ckolivas - Thank you! All good! No change in status by going back 20131229 and then coming to current. Update PS needed replacement

on: March 25, 2014, 02:26:32 PM

Things were humming along, then rig stopped working with the: [Firmware Version] => 20140324 cgminer: 698d677 cgminer-openwrt-packages: aadd747+ luci: 346e3e7+ Socket connect failed: Connection refused Errors, after reboot connects for a moment but never hashing all discarded. Then error returns and cgminer process ends. Tried diff IPs, updating firmware (currently on 20140324), diff pools, etc. Ping/tracrt/nslookup all working. Where to go from here? If you get it running again, I'll point to your acct for the rest of the day.

on: March 21, 2014, 12:48:25 AM

Quote from: ckolivas on March 20, 2014, 10:06:39 AM Quote from: M3kk on March 18, 2014, 01:55:07 PM A new openwrt with 4.2.0 ? TY. Here you go, firmware based on cgminer 4.2.0 (with efficient solo mining!): http://ck.kolivas.org/apps/cgminer/avalon/20140320/ Thanks for the post. Any reason to suspect this may cause an increase is discards?

on: March 17, 2014, 06:11:45 PM

Good for 55nm clone? Quote from: ckolivas on March 09, 2014, 07:52:39 AM Quote from: M3kk on March 09, 2014, 07:10:18 AM Hello, someone can build the latest openwrt trunk with the lastest cgminer? (4.1.0) Here you go, and given the bugfixes that went into 4.1.0, this might be one of the best firmwares ever, though it's completely untested. http://ck.kolivas.org/apps/cgminer/avalon/20140309/

on: March 16, 2014, 01:26:45 AM

What are acceptable temps and HW errors on Avalon2 200Gh/s? I'm seeing about 252k errors over the past 14hrs with a temp a 49 and freq of 1400. This is a dual card rig. Coming from GPUs, that seems like an awful lot of errors, but dropping to a freq of 1300 didn't seem to do much.

on: December 20, 2013, 03:42:11 PM

I'll take an invite I guess. Always nice to feel wanted. 6mhs much coinage

on: May 20, 2013, 02:39:57 PM

In my experience you'll be ok, not a lot of data is passing along the channel I have a x16 3.0 card plugged into the 1x slot

on: May 20, 2013, 02:36:33 PM

What a great offer and made only to the noobs. . . awesome.

on: May 20, 2013, 02:32:48 PM

Ha, Asics. Old School . . .

on: May 20, 2013, 02:24:22 PM

I guess I'll use you for #2 post. Buena

on: May 20, 2013, 02:12:59 PM

How many pages of noob posts can one site maintain?

Pages: [1]