 Show Posts
|
|
Pages: [1] 2 »
|
|
Ahhh, cool I'm gonna try that. TY
|
|
|
|
Any ideas?
My first GPU isn't doing much work.
Average speed (30s): 0.5 sol/s | 12.1 sol/s | 12.6 sol/s | 12.9 sol/s | 13.2 sol/s | 13.2 sol/s Total: 64.5 sol/s
All the same cards RX470 4gb, mining BEAM.
Also, any fan settings on lolminer?
Hmm ... does the GPU need to do graphics in parallel? If you are on Windows can you check if the system reports memory being flagged as "shared"? Like e.g. here:  In case that "Shared GPU memory" is greater then 0 the card copies part of the memory to host system (because something is occupying memory) and that causes the miner to get slow. Have no real solution for this atm... maybe should add a flag that can force the card to step down one more solver (falling to 3G solver in this case ) .... hmmn What flag do I use? sorry, I don't see that in the instructions. I see --devices and --workbatch |
|
|
|
Any ideas?
My first GPU isn't doing much work.
Average speed (30s): 0.5 sol/s | 12.1 sol/s | 12.6 sol/s | 12.9 sol/s | 13.2 sol/s | 13.2 sol/s Total: 64.5 sol/s
All the same cards RX470 4gb, mining BEAM.
Also, any fan settings on lolminer?
What driver version? Some drivers take more vmem on 1st GPU with monitor connected. Try 20.4.2 driver. Before installing delete current with DDU. Card 0 does have a monitor connected |
|
|
|
|
Any ideas?
My first GPU isn't doing much work.
Average speed (30s): 0.5 sol/s | 12.1 sol/s | 12.6 sol/s | 12.9 sol/s | 13.2 sol/s | 13.2 sol/s Total: 64.5 sol/s
All the same cards RX470 4gb, mining BEAM.
Also, any fan settings on lolminer?
|
|
|
|
NO SETTING, NO WORKIE--
When Claymore gets around to it, he may update the miner again. He promised no further fees.
Take some time to read a page or so, he has been quoted just a few posts back. Oh, and TeamRedMiner works on ethOS, but you will need to update it on your own. And, ethOS will not read the hashrate properly for statistics. With "show miner" you will get accurate console output.
Plus, TeamRedMiner has a 2.5% fee. My Vegas get 2kH/s each, without jumping through hoops, and I gained 700+ H/s each. --scryptr
Thanks! |
|
|
|
|
Anyone using Claymore on Ethos?
With the fork to V8 i can at least be profitable.
I used to use the below for V7
claymore-xmr=flags -pow7 1
Anyone know the setting now? On 11.3?
I tried V8... no workie.
|
|
|
|
"cryptonight_type" : "heavy",
Oops forgot to mention I'm using ethos. Claymore doesn't support Heavy algo. Damn, I tried switching to windows, but I get hardly any hash. Is the heavy algo just that slow? I lost 1k hash on 6 rx470s |
|
|
|
"cryptonight_type" : "heavy",
Oops forgot to mention I'm using ethos. |
|
|
|
|
Hi all, need some help, switching to mining SUMO on my rig, and i can't find the flag settings for Cryptonight Heavy. Mining cryptonightv7 now.
anyone know the settings?
|
|
|
|
|
Confirmed, denied at Crex24
|
|
|
|
|
all my recent mining deposits were cancelled... uh oh.
|
|
|
|
|
Wonder where all the hash is... 3/4 of the hash is listed as unknown on the pool list.
|
|
|
|
Has anyone actually read the whitepaper?!
yada yada yada
If you have paid a minimum amount of focus while going through this thread you would have noticed that we stated that the whitepaper was done by the old team and we are working on another one more detailed and more technical. But you were in a rush to come up with your amazing conclusion, Sherlock. P.S: "show me sustainable" "to change your opinion" lol, you think way too highly of yourself. give it a rest and We don't care about your opinion. If you don't want to invest in this coin that's fine by us, we didn't ask you to in the first place. Taro_Naza if you want to be taken seriously along with the project you should try and be more professional. Don't let these guys bug you so much. :-) |
|
|
|
|
Are you guys actively working with cryptopia, they have blocked deposits/withdrawals for 3 days now.
|
|
|
|
diff is based on last 1440 blocks time. it will be reduced later.
Hashrate on network is calculated with:
Diff / Target time (60)
Cool, thanks |
|
|
|
We have fixed the problem we had with the pool after the fork and now you can mine XLC on the official pool https://pool.leviarcoin.org . There will be a new wallet release 0.1.4 so please wait for that. Stay tuned for the upsates. You sure everything is OK, the difficulty doesn't seem match the network hashrate. Seems high. |
|
|
|
Thanks!
I did not notice this field and probably posted without it. Apparently this is the reason. At the moment, the purse status on Cryptopia is "Maintenance". I think there will be an update, but in my updated wallet the balance is 0, after importing * .wallet. Apparently my XLC is not destined to go to the stock exchange.
Unfortunately, you probably lost it. But, I would open a ticket with them with the hash for this transaction, they might be able to move it for you. |
|
|
|
Hello! I,m create transaction Status: 477 confirmations Date: 30-12-17 04:44 To: LsDjN4vDhDSjT21daqyiZ96z6vaZeyssGLcVUAfjYUxjdwuAZ9ki6iNZYNupRwKvmGdnoV1GAwmoHGg quP2eNdyC3v4hRPo Amount: -16.00 XLC Fee: 0.01 XLC Transaction hash: F40DF1046BF8A18FF50D14730AB781ED5EE8B914F217AE9185E87403F1485F0E My balance for Cryptopia 0XLC. Why? Thanks.
Open a ticket with cryptopia A ticket with cryptos is open. I'm waiting for the help from the developers, can they check this transaction in the current network and give the answer "We checked, the transaction exists, the problem from the Cryptopia". but do not send me immediately to create a ticket. You are worse than the Russian police! Did you put the cryptopia payment ID on your transaction? |
|
|
|
|
