If you look on the first post and scroll down a bit you will find all the available wallets. 

This is the URL from windows icon:

https://mega.co.nz/#!NENVWR6Q!kYKc3uqVYO51kfmQxxKBAtfmmC6v-YD-B5tYDADbBww

I just clicked the link and got this url:

https://mega.co.nz/#!NENVWR6Q!kYKc3uqVYO51kfmQxxKBAtfmmC6v-YD-B5tYDADbBww

you need to be patient for about a minute, then it will appear and you can download it.

I think it only works on a 64bit OS, failing that you will have to keep your coins on an exchange or in a pool wallet.

thanks,

I managed to fix my issue, I deleted the main files from the Pharma folder and the contents of the two sub directories leaving my existing wallet.dat.

After restarting the wallet, the blockchain started downloading and after while my wallet and total coins appeared. 

Soon as its done they are being sent to an exchange for safe keeping... (never thought I would say that..)

Is there a quick way to load all these in at once, or do i need to enter one at at time.

The format above is not correct either, it should be:

addnode 98.214.222.61 add

What I would like to do is kick start the download of the Pharma blockchain, its stuck on block 21626.

thanks


Andrew

Hello,

I tried that, removed Pharma folder and ran the Pharma again.  Copied my wallet.dat over the top of the new one.

ran Pharma again, balance is 0.

However, the transactions are showing up I can see the initial transfer of 170k coins that I mined.  Toward the top of the transaction list there are a few pages of transactions with a question mark against them.

They are for shrapnel,  0.00000002.  I will leave the wallet on for a few hours to see if it sorts itself out.  otherwise I will have to try something else.

thanks for your help


Andrew

Hello,

My Pharma Wallet seems to be stuck downloading block 21626, its 28 hours behind and showing no signs of catching up.  I have 176483.94228397 XPH in the wallet.

How can i give the wallet a kick so it will sync and I can spend my coin?

thanks


Andrew

Hello,

I have a private bitcoin pool with 3 terra hash running. The highest diff share being produced is 17,000,000. To stand any chance of solving a block I need hardware that will submit shares with a diff of 42,000,000,000 or what ever the current bitcoin difficulty is.

How many terra hash do i need in my pool to achieve that?

thanks


Andrew

Thanks,

I will have a look at that, however I what I am interested in is a site or tool that will interrogate the blockchain and return all the transactions that have occurred on my bitcoin wallet address including the value of bitcoins when they arrived and left my wallet.

You method is ok but I can grab the price charts from Sierra.  I need something that will look at the transactions on my bitcoin wallet address.

Any ideas?


Andrew

Hello,

I need to record my gains for the past year with my accountant, I have been mining and have received around 180 btc since October 2013.  Not got many left, I need to record the value of the coins when I received them in my wallet and record the price I sold them for.  Does anyone know where I can get a download of that information?

thanks



Andrew

Thanks for posting,

Hopefully we will see more reports pop up as the units are being shipped.

I bought hosting for my Excaliber, I think that was a good choice looking at the four power supplies you have attached to your miner.

I joined the queue quite late so I don't expect to get it until mid November or even December...  (Not much point if its that late)


regards


Andrew

 

Hello,

I just received my RedFury in the post today, I watched the youtube video and this worked first time.  Does anyone have any instructions on how to reprogram the rom and compile the rom source so I can have a play with it.
I am using windows, which might be a problem.  However if I need to switch to linux I have a spare laptop I can use.

thanks


Andrew

I am on day 2 shipping, can anyone confirm they are hashing in the data centre please.

ok, before I completely give up on this idea of mining litecoins or any other CPU based coin.  Here are the specs of the Superdome, I can get two of these.  They went end of line on the 4th June 2013 so I would imagine they must still be relatively current, or maybe not see what you think.

Prod Nbr   Description (EN)   Qty
A5200A   HP Superdome Server Solution   1
A9834A   HP Superdome 32/64 Core Chassis   1
A9834A#429   HP 32p Chassis,Hardware Only   1
A5800A   PDCA Redundant Power Source   1
A6440A   SuperDome in-line power connector   2
A6440A#501   In-line connector for 5 wire power   2
A9837A   HP Superdome sx2000 Cell Board   8
AD371A   HP Superdome dual core 1.6/18M processor   16
AD372A   HP Superdome iCAP 1.6/18M processor 2c   16
A9857A   HP SD 512GB(128x4GB) PC2-4200 R Memory   2
AB405A   HP Superdome PCIe/PCI-X 6/6 I/O chassis   4
AB545A   HP PCI-X 4-port 1000Base-T Gigabit Adptr   16
AB290A   HP PCI-X 2p 1000BT, 2p U320 SCSI Adptr   2
AH403A   HP PCIe 2-port 8Gb FC SR (Emulex) HBA   16
A9835A   HP Superdome 32/64 Core Addon Chassis   1
A9835A#429   HP 32p Add On Chassis, Hardware Only   1
A5800A   PDCA Redundant Power Source   1
A6440A   SuperDome in-line power connector   2
A6440A#501   In-line connector for 5 wire power   2
A9837A   HP Superdome sx2000 Cell Board   8
AD371A   HP Superdome dual core 1.6/18M processor   16
AD372A   HP Superdome iCAP 1.6/18M processor 2c   16
A9857A   HP SD 512GB(128x4GB) PC2-4200 R Memory   2
AB405A   HP Superdome PCIe/PCI-X 6/6 I/O chassis   4
AB545A   HP PCI-X 4-port 1000Base-T Gigabit Adptr   16
AB290A   HP PCI-X 2p 1000BT, 2p U320 SCSI Adptr   2
AH403A   HP PCIe 2-port 8Gb FC SR (Emulex) HBA   16
BA931AA   HP-UX 11i v3 DC-OE Media   4
BA931AA#AJR   DVD media   4
BA931AC   HP-UX 11i v3 Data Center OE LTU   4
BA931AC#055   PCL HP-UX 11i v3 DCOE IPF 16+Skt LTU   64
AF034A   HP 10642G2 200mm Extn Shock Rack   1
AF034A#001   Factory Express Base Racking   1
C7508BZ   HP Tape Array 5300 Factory Rack   2
Q1592B   HP DVD + RW Array Field Module   4
Q1575A   HP DAT 160 Array Module   4
C2364A   SCSI Terminator LVD/SE HDTS68 Multimd   8
C2363B   SCSI Cable 10m VHDTS68/HDTS68 M/M Multimd   8
AF074A   HP Rack Grounding Kit   1
AF062A   HP 10K G2 600mm Stabilizer Kit   1
AF054A   HP 10642 G2 Sidepanel Kit   1
252663-B24   HP 16A High Voltage Modular PDU   2
AF581A   HP 3.6m 16A C19 IEC309 Pwr Cord   2
AD277A   HP GiCAP Sharing Right   64
      
A9802D   HP Superdome SMS PC Solution   1
AG066A   HP TFT7600 Rckmnt Kybd 17in Intl Monitor   1
J9085A   HP 2610-24 Switch   1
508783-B21   HP 2610 series Rail Kit   1


thanks


Andrew

Hello,

I can get two fully loaded units for 2k euros for the pair.  It needs a special phase 2 electricity supply.  So I guess I could get that installed if required, or find a datacentre locally to house it.

If your interested in re-writing CGMiner to mine litecoins on a Superdone what would you charge me for writing that?

I have five jupiters on order for September delivery, all hosted so at the moment I will have 2 terra hash, however as the machines are slightly faster I could have 2.5 or even 3 terra hash.  WOW I am going to clean up baby :-)


rgds



Andrew

Hello,

Thanks for the advice, I will leave this alone as it doesn't seem worth the trouble.

I have a few Jupiters on order for September, its been a long wait since June.  The next couple of weeks are going to drag...

Happy mining :-)


Andrew

Hello,

Does anyone know if it is possible to run bitcoin or litecoin mining software on a HP Superdome computer with Itanium processors?

I have been offered two fully loaded units at scrap value because they have been superseded by quad core versions, if anyone has any experience with these machines your advice would be appreciated.

thanks


Andrew

Hello,

I can confirm it works, I have two gold and one platinum account all running in the cloud.

This is very real.

Bear with the technical issues caused by the large demand of the product. 

It will slowly trade micro amounts of bitcoin to earn to a nice profit at the end of the week or month.

rgds


Andrew

Hello,

I have four Jupiter miners that I have paid for including six months hosting on the KnCMiner pool.

I am not sure if the KnCMiner pool is the best option or not.  I am very new to bitcoin mining.  I just know I need to hit this as fast as I can afford...

If anyone has any reasons why I should mine in a different pool please let me know.


thanks


Andrew

Hello,

Does anyone have a phone number for Avalon, I looked on their website but I cannot find one.

thanks


Andrew

Hello,

I am waiting for batch 2 to be shipped aswell, I bought a pre-order Batch 2 Avalon last week.

If I hear any news on order 1277 that was paid for on the 18th Feb I will post a message here.

Looking on the Avalon site the status of batch 2 is in production.

Guess we need to be patient.


rgds


Andrew