Thanks.

I just started to use this pool.

I am getting 100% reject rates at the moment?

Thoughts?  Do I have something setup incorrectly?  Followed the instructions.  Have about 2Th's aimed at this pool due to the payout stats, so I hope this is not a big issue with the pool but some thing on my end....

Thanks!

Thanks!

Dumb question.  Where does one find the total Hashrate at?

What is the right question?

So just how many Th's do you need to be effective at doing your own pool?

One board has all lights in chase.  The other board has all but one light in chase.

I am about to pull all the heat sinks and put new thermal paste on them...  Hopefully that will help as well.

One miner has half it's cores running.  The other has more but is hashing slower.  I think it's rebooting due to heat, so it never gets up to speed.  More later.

The only issue I am worried about at the moment is that one chaser light isn't lighting so it's either a bad light or a problem... :-)


PS Got a new flashed BBB off eBay and can now connect no problem.  Hashes up to 1.6Th at times... :-)  Still need to solve the top.

I would be curious if anyone has gotten a RasPi B+ to work as a replacement for the BBB?

Also. 

I haven't read all of this so maybe my question is answered above.

1. Can you just plug into the USB connectors on the two boards and plug those into a computer (RasPi) running CGMiner (of some flavor), and have it work?  Or maybe a PC?

2. I have blinky lights on the BBB. Does the BBB actually work, but need to be reflashed?

3. I have blinky lights on the two boards, one board has one light that doesn't light as it cycles through them.  Is that due to a bad chip? 

4. I have NO CTA light at all.  Nothing lights up on the front panel.  Yet I have lights on the board?

Thanks in advance, I ordered a BBB off eBay that is flashed already with the latest know version from Cointerra, was taken out of a working unit, so they say.  But I don't understand why I don't get a CTA light up front?

I will check the USB hub that is inside the unit as well. 

Thanks

A new question. :-)

Has anyone directly hooked up to the cointerra miners via USB?  The BeagleBone died and I figured I could just hook directly to the USB connectors on the miners.

My RasPi see's the connections, but I can't get them connected to minera?

Thoughts?

Thanks!

I am using a RasPi B+ with your image.  Put onto the SD by ApplePi-Baker.  Works great.

But when I go to change anything in settings I would click save, be taken to the mobile miner each and everytime.  The answer was to delete whatever is in the mail field for mobile miner and save again, then everything works great.

My only issue is that BFL's units seem to hash at a slower rate than they did when using with other software.  Using CGMiner. Anyone with thoughts?  Sorry to mix the two issues.

THANKS!

I would never have guessed that.  Seems a bug.  Hopefully will get fixed. :-)

Again many thanks.

This indeed did work.

But how do I get it to see the BFL miners that are on the USB connectors on the RasPI B+?

Edit: Solved this.  Needed to select run as Root in the miner.  Now it's fine.

Next question... :-)  I am seeing off of two BFL's one a single and one a double something that looks like half of the expected Hash Rate.  I was getting double when it was just connected to a PC that I had running, bitminter's java miner.  I noticed that the "Frequency" was unknown in the dashboard.  Is that a problem?  Do I need to set that to something?  Or is there something else not working?

:-)

Thanks

Ok just read the whole forum.  Yawn. 

I just installed Minera onto my RasPi B+.  Came up like a champ.  I can log in via the web browser, SSH to it etc...

The problem I have is that any change I make in the settings pages do not stick.  I log out, come back and its back to the default.

Plus I can not get any miners started.

I am sure I have done something wrong here, but any help would be appreciated.

Thanks!

I have moved on.

Sorry.  If I come back to this I will update what I am seeing.

(PS I hate having to wait 6 minutes between posts.  Kinda crazy and VERY bad use of my time.)

Would love to know if you fully support x6500's also.  Ie; I can move away from mpbm...

I am trying to get mpbm working with a X6500 rev3 to connect to slush's pool.  I can't seem to do it.

Thoughts?

I can get older versions of MacMiner 1.0.2 to work, but can not get the latest version to work.  Here's what I see using BFG Miner:

latform name: Apple
 [2013-06-05 10:28:15] CL Platform version: OpenCL 1.2 (Dec  4 2012 18:26:30)
 [2013-06-05 10:28:15] List of devices:
 [2013-06-05 10:28:15]    0   ATI Radeon HD 6490M
 [2013-06-05 10:28:15] Selected 0: ATI Radeon HD 6490M
 [2013-06-05 10:28:15] Unknown stratum msg: {"error": [-3, "Method 'get_transactions' not found for service 'mining'", null], "id": "txlistf97", "result": null}
 [2013-06-05 10:28:15] Network difficulty changed to 15.6M (111.7Th/s)
 [2013-06-05 10:28:15] New block: ...3fa929c5 #239905 diff 15.6M (111.7Th/s)
 [2013-06-05 10:28:15] Stratum from pool 0 detected new block
 [2013-06-05 10:28:15] Selecting poclbm kernel
 [2013-06-05 10:28:18] Initialising kernel poclbm121016.cl without bitalign, 2 vectors and worksize 128
 [2013-06-05 10:28:18] initCl() finished. Found ATI Radeon HD 6490M
 [2013-06-05 10:28:18] Init GPU thread 1 GPU 0 virtual GPU 0
 [2013-06-05 10:28:18] CL Platform vendor: Apple
 [2013-06-05 10:28:18] CL Platform name: Apple
 [2013-06-05 10:28:18] CL Platform version: OpenCL 1.2 (Dec  4 2012 18:26:30)
 [2013-06-05 10:28:18] List of devices:
 [2013-06-05 10:28:18]    0   ATI Radeon HD 6490M
 [2013-06-05 10:28:18] Selected 0: ATI Radeon HD 6490M
 [2013-06-05 10:28:18] Initialising kernel poclbm121016.cl without bitalign, 2 vectors and worksize 128
 [2013-06-05 10:28:18] initCl() finished. Found ATI Radeon HD 6490M
 [2013-06-05 10:28:18] 2 gpu miner threads started
 [2013-06-05 10:28:18] Disabling extra threads due to dynamic mode.
 [2013-06-05 10:28:18] Tune dynamic intensity with --gpu-dyninterval
 [2013-06-05 10:28:18] Testing pool http://pool.fabulouspanda.co.uk:9332
 [2013-06-05 10:28:18] OCL 0 (thread 1) being disabled
 [2013-06-05 10:28:18] JSON-RPC call failed: {
   "data": null,
   "code": -32601,
   "message": "Method not found"
}
 [2013-06-05 10:28:18] Testing pool 1 stratum stratum+tcp://pool.fabulouspanda.co.uk:9332
 [2013-06-05 10:28:18] Switching pool 1 http://pool.fabulouspanda.co.uk:9332 to stratum+tcp://pool.fabulouspanda.co.uk:9332
 [2013-06-05 10:28:18] Stratum authorisation success for pool 1
 [2013-06-05 10:28:18] Pool 1 http://pool.fabulouspanda.co.uk:9332 resumed returning work
 [2013-06-05 10:28:18] Testing pool http://mining.eligius.st:3334
 [2013-06-05 10:28:18] Closing socket for stratum pool 1
 [2013-06-05 10:28:19] HTTP request failed: Recv failure: Connection reset by peer
 [2013-06-05 10:28:19] HTTP request failed: Empty reply from server
 [2013-06-05 10:28:19] JSON-RPC decode failed: [
   20,
   "_stratum_mining_subscribe() takes exactly 1 positional argument (2 given)",
   "Traceback (most recent call last):\n  File \"/home/bitcoinpool/eloipool/stratumserver.py\", line 91, in found_terminator\n    rv = getattr(self, funcname)(*rpc['params'])\nTypeError: _stratum_mining_subscribe() takes exactly 1 positional argument (2 given)\n"
]
 [2013-06-05 10:28:19] Stratum authorisation success for pool 2
 [2013-06-05 10:28:19] Pool 2 http://mining.eligius.st:3334 resumed returning work
 [2013-06-05 10:28:19] Closing socket for stratum pool 2
 [2013-06-05 10:28:23] Stratum from pool 0 requested work update
 [2013-06-05 10:28:24] Unknown stratum msg: {"error": [-3, "Method 'get_transactions' not found for service 'mining'", null], "id": "txlistf98", "result": null}
 [2013-06-05 10:29:18] Stratum from pool 0 requested work update
 [2013-06-05 10:29:18] Pool 0 is hiding block contents from us
 [2013-06-05 10:29:47] New block: ...f3adc660 #239906 diff 15.6M (111.7Th/s)
 [2013-06-05 10:29:47] Stratum from pool 0 detected new block
 [2013-06-05 10:29:50] Stratum from pool 0 requested work update
 [2013-06-05 10:29:51] Unknown stratum msg: {"error": [-3, "Method 'get_transactions' not found for service 'mining'", null], "id": "txlistf9b", "result": null}
 [2013-06-05 10:29:57] OCL 0 (thread 0) being disabled
 [2013-06-05 10:29:58]
Summary of runtime statistics:

 [2013-06-05 10:29:58] Started at [2013-06-05 10:28:15]
 [2013-06-05 10:29:58] Runtime: 0 hrs : 1 mins : 40 secs
 [2013-06-05 10:29:58] Average hashrate: 27.3 Megahash/s
 [2013-06-05 10:29:58] Solved blocks: 0

I have put all of the info in needed for stratum.bitcoin.cz...  Yet it seems to default to some other pool....

When I use CPU Miner I get the following...

[2013-06-05 10:32:17] 8 miner threads started, using 'scrypt' algorithm.
[2013-06-05 10:32:18] HTTP request failed: Empty reply from server
[2013-06-05 10:32:18] json_rpc_call failed, retry after 30 seconds
[2013-06-05 10:32:48] HTTP request failed: Empty reply from server

Any ideas?

Thanks

PS Using a MacBook Pro running 10.8.3