Niceacrobit

what did you put for the fields mentioned below such as

tax id
ssn
and other weird fields that they ask do you have to fill all of these or just fill the ones that apply to you
I dont wanna place my order and do it wrong and loose my bit coins so guidance is great

I saw S9 shipment last night in stock sold out over night crazy

hey guys sooooo SORRY to hear about everyone getting ripped off by these pieces of shit... i almost went along with it as well  lucky enough i ran the site before ordering and ran into this so thank you very much as for me i am a noob farming with gtx 970 and an i7 of 1 dollar a day haha but i am in the market of buying an S9 that i have the funds now just waiting for the next batch does anyone have experience with the T9 vs S9 ? is it worth it or not please let me know as well are they really 1415 ? and also i see the next batch release is in the end of December correct if i am wrong in any lines thanks and thanks for the help

well as Ive seen so far the S9 does seem to have a lot more due to failures but has a good ratio for speed and power consumption that keeps it in a good margin for a profitable investment but due to it only probably lasting for a couple of months before it burns out I am thinking of ditching out the extra money and extra cost for power and upgrading to a T9 if I go for mining Bitcoin anyways which I have more experience using instead of mining lite coin

I have being using a rig with I7 4790k 20gb ram and a gtx 970 for mining and it doesn't make much and I do understand that it only is pushing 4gb of video but how much would I actually push if I invested say for a 8gb card putting me at 12 gb total on video would that even bring me anything close to the speeds as an S9 T9 or L3 ?

As for what Floppy disk said as advising me to the L3+ which I am giving some thought due to its low power consumption and profitable gains my only draw back is the trust and knowledge of mining lite coin as well as its volatility and how it may change ?


any more advise is great and appreciate thanks again and I will be ready for once one of the new batches comes out just basically trying to pin point an exact one

Also how reliable are the L3+ compared to the S9 ? anyone have experience using at T9 ?

hey thanks for everyone's reply's

well as Ive seen so far the S9 does seem to have a lot more due to failures but has a good ratio for speed and power consumption that keeps it in a good margin for a profitable investment but due to it only probably lasting for a couple of months before it burns out I am thinking of ditching out the extra money and extra cost for power and upgrading to a T9 if I go for mining Bitcoin anyways which I have more experience using instead of mining lite coin

I have being using a rig with I7 4790k 20gb ram and a gtx 970 for mining and it doesn't make much and I do understand that it only is pushing 4gb of video but how much would I actually push if I invested say for a 8gb card putting me at 12 gb total on video would that even bring me anything close to the speeds as an S9 T9 or L3 ?

As for what Floppy disk said as advising me to the L3+ which I am giving some thought due to its low power consumption and profitable gains my only draw back is the trust and knowledge of mining lite coin as well as its volatility and how it may change ?


any more advise is great and appreciate thanks again and I will be ready for once one of the new batches comes out just basically trying to pin point an exact one

hey thanks for your reply so you think s9 is the best rig to get right now for mining compared to T9 and L3+ ?
and so I will be able to place order on December for new batch or would is there a way to pre order them from bit main?

hey guys  i am a noob farming with gtx 970 and an i7 of 1 dollar a day haha but i am in the market of buying an S9 that i have the funds now just waiting for the next batch does anyone have experience with the T9 vs S9 vs L3+ ? is it worth it or not please let me know as well are they really 1415 ? and also i see the next batch release is in the end of December correct if i am wrong in any lines thanks and thanks for the help

hey guys sooooo SORRY to hear about everyone getting ripped off by these pieces of shit... i almost went along with it as well  lucky enough i ran the site before ordering and ran into this so thank you very much as for me i am a noob farming with gtx 970 and an i7 of 1 dollar a day haha but i am in the market of buying an S9 that i have the funds now just waiting for the next batch does anyone have experience with the T9 vs S9 ? is it worth it or not please let me know as well are they really 1415 ? and also i see the next batch release is in the end of December correct if i am wrong in any lines thanks and thanks for the help

Thank you sir i got it now

hey guys i keep getting this error when initiating the Eth.bat file  i actually have the correct Ether wallet from myetherwallet site directly can someone help me out and let me know why it is not working I got nicehash working so not sure why this is not ill post my code and the error i get for you guys to see thanks



setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100


EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x755B0D8310F977c2427AfF530D44DDa0F0049D32/ orc

THIS IS THE ERROR I GET _______________________________________________________________





This pool (eth-eu2.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eth-eu2.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eth-eu2.nanopool.org removed from the list
This pool (eth-us-east1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eth-us-east1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eth-us-east1.nanopool.org removed from the list
This pool (eth-us-west1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eth-us-west1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eth-us-west1.nanopool.org removed from the list
This pool (eth-asia1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eth-asia1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eth-asia1.nanopool.org removed from the list
ETH: 1 pool is specified
Main Ethereum pool is eu1.ethermine.org:4444
DCR: 4 pools are specified
Main Decred pool is pasc-eu2.nanopool.org:15555
AMD OpenCL platform not found
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
CUDA initializing...

NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 9.0/8.0
GPU #0: GeForce GTX 970, 4096 MB available, 13 compute units, capability: 5.2

Total cards: 1
DUAL MINING MODE ENABLED: ETHEREUM+DECRED
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ETH: Stratum - connecting to 'eu1.ethermine.org' <188.165.220.188> port 4444
ETH: Stratum - Connected (eu1.ethermine.org:4444)
ETH: Share rejected!
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...
 DCR: Stratum - connecting to 'pasc-eu2.nanopool.org' <198.251.88.21> port 15555
 DCR: Stratum - Connected (pasc-eu2.nanopool.org:15555)
 DCR: Authorized
 DCR: 10/18/17-16:18:03 - New job from pasc-eu2.nanopool.org:15555
 DCR: 10/18/17-16:18:07 - New job from pasc-eu2.nanopool.org:15555
 DCR: 10/18/17-16:18:09 - New job from pasc-eu2.nanopool.org:15555
ETH: Stratum - connecting to 'eu1.ethermine.org' <188.165.220.188> port 4444
ETH: Stratum - Connected (eu1.ethermine.org:4444)
ETH: Share rejected!
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...
GPU0 t=73C fan=70%

hey guys similar error but i actually have the correct Ether wallet from myetherwallet site directly can someone help me out and let me know why it is not working I got nicehash working so not sure why this is not ill post my code and the error i get for you guys to see thanks



setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100


EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x755B0D8310F977c2427AfF530D44DDa0F0049D32/ orc

THIS IS THE ERROR I GET _______________________________________________________________

This pool (eth-eu2.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eth-eu2.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eth-eu2.nanopool.org removed from the list
This pool (eth-us-east1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eth-us-east1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eth-us-east1.nanopool.org removed from the list
This pool (eth-us-west1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eth-us-west1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eth-us-west1.nanopool.org removed from the list
This pool (eth-asia1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eth-asia1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eth-asia1.nanopool.org removed from the list
ETH: 1 pool is specified
Main Ethereum pool is eu1.ethermine.org:4444
DCR: 4 pools are specified
Main Decred pool is pasc-eu2.nanopool.org:15555
AMD OpenCL platform not found
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
CUDA initializing...

NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 9.0/8.0
GPU #0: GeForce GTX 970, 4096 MB available, 13 compute units, capability: 5.2

Total cards: 1
DUAL MINING MODE ENABLED: ETHEREUM+DECRED
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ETH: Stratum - connecting to 'eu1.ethermine.org' <188.165.220.188> port 4444
ETH: Stratum - Connected (eu1.ethermine.org:4444)
ETH: Share rejected!
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...
 DCR: Stratum - connecting to 'pasc-eu2.nanopool.org' <198.251.88.21> port 15555
 DCR: Stratum - Connected (pasc-eu2.nanopool.org:15555)
 DCR: Authorized
 DCR: 10/18/17-16:18:03 - New job from pasc-eu2.nanopool.org:15555
 DCR: 10/18/17-16:18:07 - New job from pasc-eu2.nanopool.org:15555
 DCR: 10/18/17-16:18:09 - New job from pasc-eu2.nanopool.org:15555
ETH: Stratum - connecting to 'eu1.ethermine.org' <188.165.220.188> port 4444
ETH: Stratum - Connected (eu1.ethermine.org:4444)
ETH: Share rejected!
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...
GPU0 t=73C fan=70%