Thanks Branko - Yeah they all have the 6 pin connector, I was just hoping to get more out of the modified bios before trying to mess with WattMan or Afterburner...

11.5 Mh/s is the best I can get...

Any input/assitance/help would be appreciated


My info is as follows:

Miner: Claymore 10.1 Mining - ETH
Current hash rate per card: 11.5 Mh/s (ETH)

   (Hash rate with default BIOS 10.25 Mh/s)

I'm running with the BIOS Modded w/ the following settings:

- 1500 Strap copied to 1625, 1750, 2000 and 2250

I have tried modding the BIOS with the following, but it seems to do nothing since I still only get 11.5Mh/s
   - Increased Max Power Limit to 85 in PowerTune (default 62)
   - Max GPU Freq. = 1500 Mhz (default 1800)
   - Max Memory Freq. = 2200 Mhz (default 2000)
   - Power Control Limit = 55 (default 75)
   - Decreased Max. Temp in PowerTune to 82ºC (default 85)
   - Decreased all the FAN Temps by (-10)
   - Set GPU 1300MHZ mV to 65287 (default 65288)

----------------
Windows 10 Pro 64bit
Driver - 9/22/2016    22.19.677.257   (Crimson ReLive Beta Blockchain Workloads Aug23) 17.7

Sapphire Pulse Radeon RX 560 4G GDDR5 HDMI/DVI-D/DP OC (UEFI)
   PN: 299-1E348-030SA
   SKU: 11267-00
   SN: A1733000xxxxx
   GPU: AMD 1730   M62DS.00   215-0908004
   MEM: SK hynix   H5GC8H24MJR   R0C   722A   VTCD1805WY
   MEM: SK hynix   H5GC8H24MJR   R0C   722A   VTCD1821WY
   MEM: SK hynix   H5GC8H24MJR   R0C   722A   VTCD1821WY
   MEM: SK hynix   H5GC8H24MJR   R0C   722A   VTCD1821WY

I even cleaned the GPU & Mosfet heatsinks and put new Thermaltake TG-7 grease on (just sayin...)